Instruction/ maintenance manual of the product PT6021 Altec Lansing
Go to page of 20
PT6021 User’ s guide Mode d’emploi Guía del usuario.
2 FCC Instructions for a Class B digit al device or peripheral Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1 The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
2 Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. T oday , our line of powered speakers has received more performance awards than any other brand.
3 Sound Pressure Level (SPL): 105 dB T otal Continuous Power: 75 Watts RMS • Front Speakers: 12.5 Watts/channel @ 4 ohms @ 10% THD @ 180 – 15000 Hz 2 Channels Loaded • Subwoofer: 50 Watts @ 4 oh.
4 Can’t insert the wired controller’ s DIN connector into the subwoofer . No LEDs are lit. Controller doesn’t work. No sound from one or more speakers. Crackling sound from speakers. Sound is distorted. Radio interference. Some of the pins are bent.
5 No sound from subwoofer . Low hum from subwoofer . Loud hum from subwoofer . Not enough bass from subwoofer . T oo much bass from subwoofer . Distorted monitor/TV . Wireless speaker system remote does not work. Satellite base is loose. Subwoofer volume set too low .
6 Le symbole figurant un éclair dans un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une “tension dangereuse” non isolée pouvant être d’amplitude suffisante pour constituer un risque d’électrocution.
7 Merci d’avoir acheté ce produit Altec Lansing. Depuis des générations, Altec Lansing est le pionnier de l’innovation audio. Aujourd’hui, notre gamme d’enceintes amplifiées est celle qui a reçu le plus de récompenses en matière de performances.
8 Pression sonore (SPL) : 105 dB Puissance totale en continu : 75 watts (RMS) • Enceintes avant : 12,5 watts/canal à 4 ohms taux d’harmonique à 10% THD 180 – 15000 Hz, 2 canaux chargés • Ca.
9 Insertion impossible du connecteur DIN de la télécommande filaire dans le caisson de basses. T outes les diodes électro- luminescentes sont éteintes. La télécommande ne fonctionne pas. Aucun son n’est émis par une ou plusieurs enceintes. Les enceintes grésillent.
10 Le caisson de basses n’émet aucun son. Le caisson de basses émet un faible bourdonnement. Le caisson de basses émet un bourdonnement important. Les basses émises par le caisson de basses sont insuffisantes. Le caisson de basses émet trop de basses.
11 La figura de relámpago que termina en punta de flecha y se encuentra dentro de un triángulo equilátero, tiene por finalidad alertar al usuario de la presencia de “voltaje peligroso” sin aislamiento en el interior del producto que podría tener potencia suficiente para constituir riesgo de choque eléctrico para las personas.
12 Gracias por comprar este producto de Altec Lansing. Por generaciones, Altec Lansing ha ocupado el primer puesto en innovación de audio. Hoy día, nuestra línea de parlantes amplificados ha recibido más premios por rendimiento que cualquier otra marca en el mercado.
13 Nivel de presión acústica (SPL): 105 dB Potencia total continua: 75 V atios RMS • Parlantes frontales: 12.5 V atios/canal, @ 4 ohmios @ 10% distorsión armónica THD @ 180 – 15000 Hz, 2 Canal.
14 No puedo insertar el conector DIN del controlador alámbrico en el parlante secundario para graves. Ningún indicador LED está encendido. El controlador no funciona. Uno o más de los parlantes no emite sonido alguno. Los parlantes emiten un sonido crepitante.
15 El parlante secundario para graves no emite sonido alguno. El parlante secundario para graves emite un zumbido bajo. El parlante secundario para graves emite un zumbido alto. El parlante secundario para graves no emite el nivel de graves suficiente.
16.
17.
A11786 R02 T his Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien. Co rpo ra te Headquar ters 535 Rte. 6 & 209, Milford, P A 18337-0277, USA • 866-570-5702 • 570-296-4434 • F ax 570-296-6887 Engineered in USA.
An important point after buying a device Altec Lansing PT6021 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altec Lansing PT6021 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altec Lansing PT6021 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altec Lansing PT6021 you will learn all the available features of the product, as well as information on its operation. The information that you get Altec Lansing PT6021 will certainly help you make a decision on the purchase.
If you already are a holder of Altec Lansing PT6021, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altec Lansing PT6021.
However, one of the most important roles played by the user manual is to help in solving problems with Altec Lansing PT6021. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altec Lansing PT6021 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
