Instruction/ maintenance manual of the product FPCCC47 Fujitsu
Go to page of 8
These instruc tions provide details on using the FPCCC47 Bump Case. This case is designed for use with your T ablet PC. The bump case provides added protection when t ranspor ting, using , or storing the T ablet PC. W e st ron g ly re com men d t ha t yo u rea d t he se instructions prior to using the bump case with you r com pu te r .
2 Figure 1. Bump case - Front DC-In access LAN/Modem access USB 2.0/IEEE 1394/ Pen holder External Monitor port access microphone/ headphone jack access T ransparent security strap FPC58-1044-01 Bump Case.
3 Installing the T ablet PC Figure 2. Bump case - Rear Prior to installing the T ablet PC into the bump case, remove the pen. Once th e system is installed, you will not be able to remove the pen.
4 T o install your T ablet PC into the bump case, position the case face down as shown in Figure 3. Open the side flap of the case. The flap is secured by a long strip of V elcro® that is attached to the back of the bump case.
5 System with the main batter y installed: Slide the system all the way into the bump case until it meets the opposite end of the case (see Figure 3). Pull the battery st rap down tig htly and tuck it under the battery so that it is snug agai nst the side of the battery .
6 Attaching a Shoulder Strap The ends of th e elasticized handstr aps hav e D-rings to which you can attach the shoulder str ap. T o secure the shoulder strap, attach the strap clips to two of the D-rings. The bump case can be carried vertical ly , hori zontally , or diagonally , depending on ho w you orient the clips.
7 FPC58-1044-01 Bump Case.f m Page 7 Monday, December 8, 2003 1:2 8 PM.
8 1250 E. Arques A venue (M/S 122), Sunnyvale, California 94085 For more information, call 1-877-372-3473 or visit our W eb site at: us.fujitsu. com/computers For technical suppor t call: 1-800-8fujitsu (1-800 -838-5487) or e-mail us at: 8fujitsu@us.f ujitsu.
An important point after buying a device Fujitsu FPCCC47 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu FPCCC47 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu FPCCC47 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu FPCCC47 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu FPCCC47 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu FPCCC47, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu FPCCC47.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu FPCCC47. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu FPCCC47 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
