Instruction/ maintenance manual of the product fi-6010N Fujitsu
Go to page of 21
.
i Contents Introduction .................. ............................................................... iii ■ Manuals ...................... ............................................................ ......... iii ■ Regulatory Informatio n ..
iii Introduction Thank you for purch asing the fi-6010N Net work Scanner. This easy-to-operate network scanner is used to scan documents for further use.
v OCR by ABBYY Software House. All rights reserved. ABBYY , FineReader are trademarks of ABBYY Software House. Other product names are the trademarks or registered trademarks of the respective compa nies.
vii Do not touch the insi de of the scanner unless necessary . Do not use the scanner if you smell a strange odor . Do not use aerosol sprays near the scanner . Do not place the scanner within the reach of small children. Do not touch the heated section for a long time.
1 Chapter 1 Scanner Features 1.1 Scanner Features ■ Use for scanned documents with ease This easy-to-operate network scanner may be used to scan documents for further use: 1. Scanned document files can be sent as an e-mail attachment. 2. Scanned document files can be sent by fax.
3 1.5 Names and Functions of Parts This section describes the scanner parts and their func- tions. ■ Front ■ Rear ■ Removable Parts Parts that can be removed from the scanner are dis- played below.
5 2.4 Attaching the Keyboard Cover The layout of the keyboard may d iffer according to the language selected for the operating enviro nment. The layout of each keyboard co ve r is prepared according to language requirements. Take the keyboard cover for the selected language out of its p ackaging, and attach it to the scanner.
7 5. Enter the password. Password is case sensitive. Enter "password" here. 6. Press the [Login] button. ⇒ If the administrator name and password are valid, the "System Settings" screen appears. 3.2 Changing the Administrator Password The administrator pass word can be changed.
9 3. Set the scanner's IP address. This may be done automatically, by pressing the DHCP [On] button. The IP address may also be set manually, by pressing the DHCP [Off] button and entering the following numerical addresses: • IP Address • Subnet Mask • Default Gateway 4.
11 4. Enter the following numerical addresses: • Primary WINS • Secondary WINS If a WINS server setting is not required, enter "0.0.0.0". 5. Press the [OK] button. ⇒ The information entered is set. Next, check the network connectio n. 3.
13 ⇒ The "File Download - Security Warning" screen appears. 5. Press the [Run] button. ⇒ The fi Network Scanner Admin Tool Setup Wizard appears. 6. Press the [Next] button. ⇒ The "Select Installation Folder" window appears. 7.
15 Chapter 6 Performing a Scan T est Perform a scan test to determine if the scanner is work- ing properly. Login as a regul ar user to perform the scan test. 1. Load the documents to be test scanned. ⇒ The "Login" screen appears. However, if the scanner is setup for automatic login, the "Login" screen is not shown.
17 If some other error occurs • Message An error has occurred. Tr y turning the power off and back on again. The administrator should contact the FUJITSU scanner dealer or an autho- rized FUJITSU scanner service provider for help.
19 Appendix B Scanner Care ■ Cleaning Materials Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider to obtain these products.
21 Appendix C Replacing Part s ■ Part No. and Replacement Cycle for Consumable Parts The usage count of consumable parts ca n be checked in the "Usage Status" screen on the [Device Status] tab. When parts need to be replaced soon, the "Status" infor- mation field becomes orange.
23 Appendix D Network Connection T roubleshooting ■ Checking Basic Network Operation with a Ping T est If a network connection is no t possible, refer to "3.9 Check ing the Network Connectio n" (page 11) for ping results and how to deal with them.
25 ■ Failure to Connect to a Server using its Host Name or FQDN If a server cannot be connected to by usin g its host name or FQDN, and does not respond to a ping te st, try the following steps: ■.
27 Appendix E T roubleshooting Problem Check Item Suggestion Scanner cannot be turned on. Has the Startup button been pressed? Press the Startup button. Are the AC cable and AC adapter properly connected to the scanner? Connect the AC cable and the AC adapter.
29 Copyright NetAdvant age 2007 Copyright 2000-2007 Infragistics, Inc. LEADTOOLS for .NET Copyright© 2005 LEAD T echnologies, Inc. WinP cap3.1 Copyright © 1999 - 2005 NetGroup, Po litecnico di T orino (Italy). Copyright © 2005 - 2006 CACE T ech nologies, Davis (California).
31 The name of Juniper Networks ma y not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTW ARE IS PROVIDE D "AS IS" AND .
An important point after buying a device Fujitsu fi-6010N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu fi-6010N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu fi-6010N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu fi-6010N you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu fi-6010N will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu fi-6010N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu fi-6010N.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu fi-6010N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu fi-6010N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
