Instruction/ maintenance manual of the product FI-6000NS Fujitsu
Go to page of 35
.
.
Network Scanner fi-6000NS Getting Started i Contents Chapter 1 Scanner F eatures .................................................... 1 1.1 Scanner Features ....... ......................................................... 1 1.2 From Arrival through Operation .
ii Chapter 4 Downloading the Manual ...................................... 10 Chapter 5 Performing a Scan Test ........................................ 11 Appendix A Calibrating the Touch Panel ................................. 13 Appendix B Scanner Ca re .
Network Scanner fi-6000NS Getting Started iii Copyright NetAdvant age 2005 Copyright© 2002- 2006 Infragistics, Inc. LEADT OOLS for .NET Copyright© 2005 LEAD T echnologies, Inc. WinP cap 3.1 Copyright © 1999 - 2 005 NetGroup, Politecnico di T orino (Italy).
iv OF THE USE OF THIS SOFTW ARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Portions Copyright © 1983 Regents of the University of California.
Network Scanner fi-6000NS Getting Started v INTERRUP T ION) HOWEVER CAUSED AND ON ANY THEOR Y OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TOR T (INCLUDING NEGLIGENCE OR OTHER WISE) ARISING IN ANY W A Y OUT OF THE USE OF THIS SOFTW ARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
vi Portions Copyright © 2001 Daniel Hartmeier All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source co de must retain the above copy right notice, this list of co nditions and the following disclaimer .
Network Scanner fi-6000NS Getting Started vii Introduction Thank you fo r purchasing the Network Scanner fi-6000NS. This easy-to-operate network scanne r may be used to scan documents for further use. This guide provides useful and detailed information on setting up, connecting, and caring for your scanner.
viii Use in High-safety Applications This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular ind ustrial, and general-purpose applica tions.
Network Scanner fi-6000NS Getting Started ix Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East T owe r , 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Ka nagawa 212-8563, Japan Phone : (81-44) 540 -4538 All Rights Reserved, Copy right© PFU LIMITED 2007.
x ■ Safety Precautions Do not damage the AC cable. Use only specified AC cables and connector cables. Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Do not touch the AC cable with wet hands. Wipe any dust fr om the power plug.
Network Scanner fi-6000NS Getting Started xi Do not install the sc anner on unstable surfaces. Do not block the ventilation ports. Do not place heavy objects or climb on top of the scanner . Firmly insert the power plug. A void any contact when scanner is in use.
xii.
Network Scanner fi-6000NS Getting Started 1 Chapter 1 Scanner Features 1.1 Scanner Features This easy-to-operate network scanne r may be used to scan documents for further use: • Scanned docume nt files can be sent as an e-mail attachment. • Scanned document files ca n be sent by fax.
2 1.2 From Arrival through Operation 1.3 Checking the Contents of the Scanner Package When you open the scanne r package, please handle the main unit and its attachments carefully. Make sure the scanner package contains al l the parts listed in the package contents list that is included in the package box.
Network Scanner fi-6000NS Getting Started 3 1.4 Names and Functions of Parts This section describes the scanner parts and their functions. ■ Front ■ Rear ■ Removable Parts Parts that can be removed from the scanner are displayed below.
4 Chapter 2 Setting up the Scanner 2.1 Space Requirements The following space is requir ed to set up the scanner: Depth: 700m m Width: 400mm Height: 500mm 2.2 Installing the Scanner 1. Place the scanner at its installation sit e. 2. Attach the ADF paper chute.
Network Scanner fi-6000NS Getting Started 5 Chapter 3 Setting up for Network Use 3.1 Logging in To set up the network connecti on, you must login as the administrator. Th e user name and initial password for the administrator are as follows: • User Name: admin • Password: password 1.
6 3.3 Setting the Scanner Name A scanner name may be set to provide a network alias for the device. 1. Select the [System Settings] tab on the top menu. 2. Select the [Scanner Name] tab on the left side menu. ⇒ The "Scanner Name" screen appears.
Network Scanner fi-6000NS Getting Started 7 5. Select whether "Daylight Savings Time" should be on or off. This option is not sh own for timezones whe re daylight savings time is not used. 6. Press the [OK] button. ⇒ The Region/Timezone is set.
8 3.6 Setting the DNS Server A primary DNS and secondary DNS can be set. 1. Select the [Network Settings] tab on the top menu. 2. Select the [DNS Server] tab on the left sid e menu.
Network Scanner fi-6000NS Getting Started 9 3.8 Checking the Network Connection The network connectio n may be checked by performing a ping test. 1. Select the [Network Settings] tab on the top menu. 2. Press the [Down] button on the left side menu. ⇒ Scroll the left side menu down until the [Ping] tab appears.
10 Chapter 4 Downloading the Manual In addition to this "Getting Started" guide, a "Network Scanner fi-6000NS Operator's Guide" is also available. The "Network Scanner fi-6 000NS Operator's Guide" contains information about scanner settings, scanner administration, and scanner operations.
Network Scanner fi-6000NS Getting Started 11 Chapter 5 Performing a Scan T est Perform a scan test to determine if the scanner is working properly. Login as a regular user to perform the scan test. 1. Load the documents to be te st scanned. ⇒ The "Login" screen appears.
12 7. Check the scanned data. 8. Press the [OK] button. ⇒ The "Maintenance" scr een is shown again. ■ If Scanning Completes Successfully Continue with the setting procedures described in Chapter 1 of the "Network Scanner fi-6000NS Operator's G uide".
Network Scanner fi-6000NS Getting Started 13 Appendix A Calibrating the T ouch Panel This should be done if and when the touch panel responses seem out of alignm ent with the positions of objects on the LCD screen. 1. Login as the administrator. For details, refer to "3.
14 Appendix B Scanner Care ■ Cleaning Materials * To obtain Cleaner F1 , contact your FUJITSU dealer or an authorized FUJITSU scanner service provider. ■ Cleaning Method Clean the ADF with a soft cloth moistened with cleaner F1. ■ Which Parts and When Clean all parts after every 1,000 sheets scanned.
Network Scanner fi-6000NS Getting Started 15 Appendix C Replacing Consumable Part s ■ Replacement Part No. and Standard Replacement Cycles The usage c ount of consuma b le parts can be checked in administrator mode on the "Usage Status" screen.
16 Appendix D Network Connection T roubleshooting ■ Checking Basic Network Oper ation with a Ping Test If a network connection is not possible, refer to "3.8 Check in g the Network Connection" (p age 9) for ping results and how to deal with them.
Network Scanner fi-6000NS Getting Started 17 ■ Failure to Connect to a Remote Computer us ing its IP Address If a remote computer cannot be connected to using its IP address, and does not respond to a pi ng test, try the following steps: No.
18 ■ Failure to Connect to a Remote Computer using its Server Name If connection to a remote comp uter using a FQDN is not possible even after the server na me has been checked using a ping test, tr.
Network Scanner fi-6000NS Getting Started 19 ■ Problems when Connecting to the Scanner using a Web Browser If, when connecting to the scanner via a we b browser the "Scripts are usually safe.
20 Appendix E T roubleshooting Problem Check Item Suggestion Scanner cannot be turned on. Has the Startup button been pressed? Press the Startup button. Are the AC cable and AC adapter properly connected to the scanner? Connect the AC cable and the AC adapter.
z Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. z The contents of this manual are subject to change without notice.
An important point after buying a device Fujitsu FI-6000NS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu FI-6000NS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu FI-6000NS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu FI-6000NS you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu FI-6000NS will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu FI-6000NS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu FI-6000NS.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu FI-6000NS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu FI-6000NS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
