Instruction/ maintenance manual of the product fi-5530C Fujitsu
Go to page of 28
P3PC-1342-02EN.
.
fi-5530C Image Scanner Getting Started i CONTENTS ■ Regulatory Informatio n .......................... .............................. ii ■ Note, Liability .................. ..................................................... iii ■ Safety Precautions .
ii INTRODUCTION Thank you for purchasing the fi-553 0C Duplex Color Scanner. This document describes h ow to use fi-5530C and basic operation methods. Before you start u sing fi-5530C be sure to thoroughly read this manual to ensure correct use.
fi-5530C Image Scanner Getting Started iii ■ Note, Liability READ ALL OF THIS MANUAL CAREFULL Y BEFORE USING THIS PRODUCT . IF THIS PRODUCT IS NOT USED CORRECTL Y , UNEXPECTED INJUR Y MA Y BE CAUSED T O USERS OR BYST ANDERS. Also, keep this manual in a safe place so that it can be easily referred to during use of this product.
iv All the descriptions in this manual assume the usage of Adobe Acro bat bundled with this product. However , Adobe Acrobat may be upgraded without n otice. If the descriptions differ from the screens actually displayed, refer to the Acrobat’ s “Help”.
fi-5530C Image Scanner Getting Started v ■ Safety Precautions Do not damage the AC cable. Use only specified AC cables and connector cables Use this scanner only at the indicated power volt age. Do not connect to multiple- power strip s. Do not touch the AC cable with wet hands.
vi Do not install the scanner on unst able surfaces. Do not block the ventilation ports. Do not place heavy object s or st and on top of the scanner . Firmly insert the power plug. A void any contact when scanner is in use. Do not use the scanne r immediately after moving it from a cold place into a warm room.
fi-5530C Image Scanner Getting Started 1 Chapter1 PREP ARING THE SCANNER 1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make su re that the packa ge contains a ll the pa rts on the list included in the package .
2 1.3 Operator panel The operator panel is located on the right side of the scanner. The panel co nsists of a Function Number Dis- play, four buttons and a LED. . *) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver h elp and the "fi-5530 C Operator’s Guid e" on the Setu p CD-ROM.
fi-5530C Image Scanner Getting Started 3 Chapter2 INST ALLA TION OF THE SCANNER 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space , refer to the fi-5530C Operator’s Guide "7.
4 2. Connect the other end of the USB interface cable to your PC. ■ Connecting with the SCSI Inter- face Cable When using the scanner with a SCSI interface, the fol- lowing SCSI interface cable and SCSI card must be pur- chased.
fi-5530C Image Scanner Getting Started 5 2.3 Installing the Scanner Application For scanning documents with this sca nner, both scanner driver and im age capt uring ap plication software (called "application" hereafter) must be installed on your PC.
6 5. Click [INSTALL PRODUCTS]. 6. Click [TWAIN Driver] on the window below. 7. Error Recovery Guide Installation window appears. Error Recovery Guide is a software that d i s- plays troubleshooting infor m ation on screen when any scanner error occurs.
fi-5530C Image Scanner Getting Started 7 2. Click [INSTALL PRODUCTS]. 3. Click [ScandAll 21] on the window below. 4. Select a language used for insta llation on [Choose Setup Languag e] window and click [OK]. 5. Continue to install the applica tion following the instructions on the window.
8 6. Set scanning resolution, document size, etc. on the [TWAIN driver] window (for se tting details of scanning) and click the [Scan] butto n. 7. Documents are scanned, and the generated images are displayed on the [ScandAll 21] win- dow. If the scanning is completed without any troubles, the installation was performed successfully.
fi-5530C Image Scanner Getting Started 9 5. Click [INSTALL PRODUCTS]. 6. Click [ISIS Driver] on the window below. 7. Error Recovery Guide Installation windo w appears. Error Recovery Guide is a software that dis- plays troubleshooting information on scree n if any scanner error occurs.
10 3. Click [QuickScan PRO (Trial)] on the window below. 4. Continue to install the application following the instructions on the window. 5. Enter required information, then click [Next >]. 6. Install the application following the instructions on the window.
fi-5530C Image Scanner Getting Started 11 5. Select [Preview Scan] from the [Scan] me nu. And then the document is scanned. If the scanning completes without any trouble, the installation was performed successfully.
12 Adobe ® Acrobat ® Install Adobe Acrobat from the "Adobe Acrobat CD-ROM" provided with th is scanner. 1. Insert the Adobe Acrobat CD-ROM into the CD-ROM drive. ⇒ The "Adobe Acrobat" wi ndow appears. 2. Select the language and Click [OK] button.
fi-5530C Image Scanner Getting Started 13 ■ Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams. 1. Start up your PC. 2. Exit all currently running programs. 3. Select [Control Panel] - [Add or re move Pro- grams] from the [Start] menu.
14 5. Click the [Change/Remove] or [Remove] but- ton. 6. When the confirmation dialogbox appears, Click the [OK] or [Yes] button. ⇒ This executes the uninstallation. ATTENTION Screen displays may va ry slightly accord- ing to the operation system (OS) you are using.
fi-5530C Image Scanner Getting Started AP-1 Appendix1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Check this item Remedy Scanner does not turn on. Have you pushed the power button? Push the power button. Are the AC cable and AC adapter prop- erly connected to the scanner? Correctly connect the AC cable and the AC adapter .
AP-2 Paper is not fed (pick error occurs frequen tly, or docu- ment stops midway). Do the documents satisfy the "Docu- ment Quality" and the "Multi feed Detection Conditions" in th.
fi-5530C Image Scanner Getting Started AP-3 ■ Temporary error The following shows the procedure for releasing of each temporary error. • "U1" error 1. Remove j a mmed do cuments. (Refer to fi-5530C Operator’s Guide "5.1 Removing Jammed Documents" on the Setup CD-ROM.
AP-4 Appendix2 DAIL Y CARE ■ Cleaning Materials For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchas ed the scan- ner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moist- ened with the Cleaner F1.
fi-5530C Image Scanner Getting Started AP-5 Appendix3 REPLACING CONSUMABLES ■ Consumables and Replacement Cycle The followings are the specif ications of consumables and their recommended replacement cycles. To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.
z Copying of the contents of this manual in whole or in part and copying of the scanner applic ation is forbidden under the copyright la w. z The contents of this manual are subject to change without notice.
An important point after buying a device Fujitsu fi-5530C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu fi-5530C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu fi-5530C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu fi-5530C you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu fi-5530C will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu fi-5530C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu fi-5530C.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu fi-5530C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu fi-5530C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
