Instruction/ maintenance manual of the product ESPRIMO P1500 Fujitsu
Go to page of 52
System Operating Manual ESPRIMO P15xx / P2440 ESPRIMO P2540 / P2550 ESPRIMO P2560 / P352x.
Are ther e ... ... any technical questions or problems? Please contact: • our Hotline/Service Desk (please refer to the enclosed Service Desk list or look up the contact details on our website at: " http://ts. fujitsu.c om/suppo rt/servic e desk.
.
Copyright Fujitsu T e ch nology Solutions 2009 12/09 Published by Fujitsu T echnology Solutions GmbH Mies-van -der -Rohe-Straße 8 80807 Munich, Germany Contact h ttp://ts.fuj i tsu.com/s upport All rights reserved, includin g intellectual property ri ghts.
ESPRIMO P15xx / P2440 ESPRIMO P2540 / P2550 ESPRIMO P2560 / P352x Operating Manual Y our Esprimo P ... 5 Important note s 7 Getting started 1 1 Operation 19 T roubleshooting and tips 25 System expansi.
ESPRIMO is a registered trademark of Fujitsu T echnology Solutions G mbH. Windows 7, Windows Vista and Windows X P a re registered trademarks of Microsoft Co rporation. PS/2 is a registered tradema rk of International Business Mach ines, Inc. Pentium is a registe red trademark of Intel Corporation, USA.
Content s Contents Y o u r E s p r i m o P . . . ................... ................... .................. .............. 5 Notational conventions ........... ................... ................... ................. 6 I m p o r t a n t n o t e s ...
Contents R e s t o r i n g h a r d d i s k c o n t e n t s ........................ ................... .................. 2 9 T i p s ........................ ....................... ................... .................. 2 9 S y s t e m e x p a n s i o n s .
Y our Espr imo P ... Y our Esprimo P ... Overview ... is available in various con fi gurations that differ in terms of hardware and software. Y ou can incorporate accessible drives (for example a DVD drive) as well as oth er modules. This manual te lls you how to start using your device and how to operate it in daily use.
Y our Esprimo P ... Notational conventions Pay particular attention to text marked with t his symbol. Fa ilure to observe these warnings could pose a risk to h ealth, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective throu gh failure to observe these warnings.
Important notes Important notes Impor tantnotes Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety information Safetyinformation Note Pay attention to the information provided in the "Safety" manual and in the fo llowing s afety note s.
Important notes Cleaning the device Device, Transpo rtation Retransportati on Systemunit, seeDevice T urn off all power and equipment switches and disconnect th e power plug from the mains outlet. Do not clean an y interior parts yourself, leave this job to a service technician.
Important notes CE marking CEmarking CEmarking Notes E lectrom agneti ccompatib ility Lowvoltagedi rective The shipped version of this device complies with the requirements of EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive".
Important notes FCC Class B Compliance Statement The following statement applies to the pro duct s covered in this manual, unless otherw ise speci fi ed herein.
Getting started Getting started Gettingstarted Please observe the safety infor m ation in the "Imp o rtant notes" , Pa ge 7 chapter. Unpacking and checking the delivery It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date.
Getting started Setting up t he device Workstation Ergonomic Device When setting up your device, please read the recommendations an d safety notes in the "Safety" manual. We recommend that you place your device on a surface which is not slippery .
Getting started Connecting external devices Read th e docum entation on the extern al device before connecting it. With the exception of USB devices, always remove all power plugs before connecting external devices! Do not connect or disconnect cables during a thunderstorm.
Getting started Ports on the device Interf aces Extern aldevices Device The ports available on your device depend on the selected device con fi guration level. The ports are located on the front and back of the d evice. The ports available on your device depend on the con fi guration level you h ave selected.
Getting started Connecting a monitor ► Follow the instructions contained in the monitor manual to prepare the monitor for operation (e.g. c onne cting cables). Monitor ► Connect the da ta cable of the monitor into the monitor port of y our device.
Getting started Connecting external devices to the serial interface Serialinterf ace Serialinterf ace, Extern aldevices , Devices, External devices can be connected to the serial interface (e.g. a printer or modem). ► Connect the data cable to the external device.
Getting started Connecting the device to the mains supply Mainsadapter 2 1 ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2).
Getting started Switchin g on monit or and dev ice In order to avoid overheating, do not cover the ventilation areas of the monitor or the device. Depending on th e version, the d evice may be eq uipped with a main power switch on the back of the device in ad dition to the ON/OFF button on the front.
Operation Operation Switch the device on ► If necessa ry , switch the monitor on (see the operating manual for the monitor). Device, Monitor, ► Switch on the device using the main power switch located on the rear of the device (if present). ► Press the ON/OFF switch on the front of the device.
Operation Indicators on the device Indicators, D evice, The indicators are on the front of the casing. Which indicators are available on your device depends on the con fi guration level you have selected.
Operation Keyboard Keyboard Keyboard, Keyboard, Keyboar d, Keyboard, Keyboard, A lp hanumerickeypad Cursorkeys Keys, Function keys Numerickeypad Numer ickeypad The illustrated keyboard is an example and m ay differ from the model you use.
Operation Start key Keys, calls up the Windows Start menu. Keys, Menu key calls up the menu for the marked ite m (Windows). Keys, Keys, Shift key enables upper-case letters and the upper key symbols to be displayed. Keys, Alt Gr key produces a character shown on t he bottom right of a key (e.
Operation Property and data protect ion Propertyprotectio n Dataprotection Security measures Software functions and mechanical locking offer a broad range of functions for protecting your device and your personal data from unauthorised access. Y ou can also combine these fun ctions.
Operation BIOS setup security functions Securityfunctions, BIOSSetup, The Security menu in BIOS Set up offers you various options for protecting your personal data against unauthorized access, e.
T ro ubl esho oting and tips T roubleshooting and tips Comply with the safety information in the "Safety" manual and the chapter " Getting started", P age 1 1 , when a ttaching or detaching ca bles.
T roubleshooti ng and tips The device cannot be switched off with the O N/OFF switch. Cause Remedy The device has not been switched on with the ON/OFF switch . ► Press the ON/OFF switch again. System crash ► Keep the on/off switch pressed for at least 4 seconds until the machine sw itches off.
T ro ubl esho oting and tips Cause Remedy Wrong monitor has been set under Window XP ► Restart the device. ► Press F8 while the system is booting. Either the Wi ndows Advanced Start Options menu or the menu for selecting the operating system appears.
T roubleshooti ng and tips No mouse pointer displayed on th e screen Cause Remedy The mouse is not correctly connected. ► Shut down the operating system properly . ► Switch the device off. ► Check that the mouse cable is p roperly connected to the system unit.
T ro ubl esho oting and tips Error messages on the screen Error messages and their explanations are provided: • in the technical m a nual for the mainboard • in the documen tation for the programs used Installing new software When installing programs or drivers, important fi les m ay be overwritten and modi fi ed.
System expansions System expansions Upgrades, Device , Systemexpansion Com ponents Servicing Repairs to the device must only be carried out by qua li fi e d technicians. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fi re risk) and will invalidate your warran ty .
System expansio ns Information about boards T ake care with the locking mechanisms (catches and centring pins) when you are replacing boards or components on boards. Note that some components on th e mainboard may be very hot if the device was in use shortly before the casing w as removed.
System expansions Opening t he casing Casing, Device, ► Switch the device off. The d evice must not be in pow er-saving mode. Please o bse rve the safety information in "Im portant not e s", Page 7 . Disconnect the mains plug from the mains outlet.
System expansio ns Closing the casing ► Insert the side part in the guide rail on the lower part of the casing. Casing, Device, 1 2 2 ► Slide the side cover onto the casing in the direction of the arrow (1). ► Tighten the casing screws (2). ► Reconnect the cables that you disconnected before.
System expansions Installing and removing a board Y ou can install additional m odules in order to increase the performance of your machine. The number, position an d arrangement of the board slots on the mainboard can be found in the manual for the mainboard.
System expansio ns Do not throw away the slot cover . For cooling, protection against fi r ea n di no r d e rt o comply with EMC regulations, you must re fi t the slot cover if you remove the board. 2 1 ► Push the board i nto the slot (1). ► Tighten the screw on the s lot cover (2).
System expansions Board removing ► Open the casing (see " Opening the casing", Page 32 ). Board, ► Remove the cover plate (see "Board instal ling", Page 34 ). ► Disconnect the cables connected to the board. 1 2 ► Remove the screw on the board (1).
System expansio ns For cooling, prot ection against fi re, and in order to comply with EMC (electromagne tic compatibility) regulations, you must re fi t the slot cover . 2 1 ► Slide the slot cover into the slot (1). ► Secure the slot cover in posit ion with the screw (2).
System expansions Installing and removing drives Drive Drive, Drive, Drive, 31/2-inchdr ive 51/4-inchdriv e Drive, The PC casing can accommodate a total of fi ve drives: • three accessible drive s .
System expansio ns Installi ng an accessib le 5 1 / 4 inch driv e (e.g. DVD drive) ► Open the casing (see "Openi n g the ca sing", Pa g e 32 ).
System expansions Install an accessible 3 1 / 2 inch drive (e.g. diskette drive) ► Open the casing (see " Opening the casing", Page 32 ). Diskettedri ve, Diskettedri ve, ► Remove the accessible 5 1 / 4 inch drive (see "Removing an accessib le 5 1 / 4 inch driv e (e.
System expansio ns Remove an accessibl e 3 1 / 2 inch drive (e.g. disket te drive ) ► Open the casing (see "Openi n g the ca sing", Pa g e 32 ). ► Disconnect all cables connected to the driv e (data cable, power supply cable). 1 1 2 ► Remove the screws (1).
System expansions Installing and removing the hard disk drive Harddiskdrive, Hard diskd rive, Harddiskdrive, Removing a hard disk drive ► Open the casing (see " Opening the casing", Page 32 ). Harddiskdr ive, ► Remove all connected cables (data cable, power supp ly) from the drive.
System expansio ns Installing a hard disk drive ► Open the casing (see "Openi n g the ca sing", Pa g e 32 ). Harddiskdr ive, ► T ake the new hard disk drive out of its packaging. 1 2 2 2 2 ► Slide the hard disk drive into the casing (1).
System expansions Replacing the lithium battery In order to permanently sa ve the syst em information, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding error m essage noti fi es the user when the charge is too low o r the battery is empty .
System expansio ns T echnical speci fi cation Electrical data ESPRIMO P15XX ESPRIMO P2440 ESPRIMO P2540 ESPRIMO P2550 ESPRIMO P2560 ESPRIMO P352x Safety standards complied with: IEC 60950-1, EN 60950-1, UL 60 950CSA 22.
Index Index 31 / 2 - i n c hd r i v e 3 4 51 / 4 - i n c hd r i v e 3 4 A Access permission, SmartCard 20 Access ible drive, installing 35 removing 34 Alphanumeric ke ypad 17 Anti-theft protection 19 .
Index F Floppy disk drive, indicator 16 Function keys 17 G Getting started 7 H Hard disk drive, installing 38–39 removing 38 replacing 38 Headphones 10 I Important notes 3 Indicators, device 16 Inst.
Index Power indicator, fl ashes 16 green 16 off 16 orange 16 Preparing for fi rst use, overview 7 Preparing for use, overview 7 Processor 39 Processor , replacing 39 Property protection 19 PS/2 mous.
An important point after buying a device Fujitsu ESPRIMO P1500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu ESPRIMO P1500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu ESPRIMO P1500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu ESPRIMO P1500 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu ESPRIMO P1500 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu ESPRIMO P1500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu ESPRIMO P1500.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu ESPRIMO P1500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu ESPRIMO P1500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
