Instruction/ maintenance manual of the product FSR-3000 Fujioh
Go to page of 14
Range Hood INSTALLATION MANUAL MODEL: F SR-3000 FSR-3600 FSR-4200 1U030381 READ AND SAVE THESE INSTRUCTIONS. Keep this manual in a convenient place for future reference. FUJI INDUSTRIAL CO., LTD. TABLE OF CONTENTS Safety Instructions .................
SAFETY INSTRUCTIONS Before installation and operation, read these instructions carefully and use this product only in the manner described by the manufacturer in the operation manual. The instructions shown below are used to alert you to potential personal injury and property damage hazards.
CAUTION 3. Read specification label on this product for further information and requirements. 2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.
NAME OF PARTS SIZE & DIMENSIONS Lamp Cover Body Lamp Box Filter Rectifier Baffle Panel Oil Catch Tray Switch Fan Case Cover Accessories Washer Head Wood Screw ( × 6 pcs.
1 The range hood must be installed just above the cooktop. 2 The minimum distance from the cooking surface to the bottom of the range hood must be 24”. 3 The total weight of the FSR series range hoods are: FSR-3000 ---------- 16 kg FSR-3600 ---------- 17 kg FSR-4200 ---------- 18 kg 4 Power requirements are: AC120 V, 60 Hz, 1.
1. PREPARATION 1 This range hood can discharge upward or backward. According to the conditions where the hood is installed, determine whether it will discharge vertically (3¼" × 10" or 7" Round) or horizontally (3¼" × 10" only).
; 3¼" × × × × × 10" Horizontal Ducting ; 7" Round Vertical Ducting 8.
3 Run house wiring between service panel and hood location. 4 Prepare the range hood. (1) Remove the 7" round duct joint on the top plate of the body by removing 2 fixing screws. Note: Keep the screws for reusing later. (2) Remove the Rectifier Baffle Panel by loosening the screws, and dislocating its temporary fixing holes from the screws.
; In Case of 3-1/4 " × × × × × 10 " Vertical Discharge Mount the supplied 3-1/4" × 10" rectangular duct joint on the top plate with 4 screws (2 pieces: removed in Step 4-1, the others: supplied). Then attach the supplied soft tape around the duct joint.
2. RANGE HOOD MOUNTING 1 Referring to “SIZE & DIMENSIONS”, insert 4 washer head wood screws into the bottom plate of the cabinet. Marking before screwing is recommended. Allow about ¼" between the bottom plate and screwheads for hanging the hood body.
Conduit Nut Range Hood 3. CONNECTING POWER SUPPLY WIRES WARNING : • Electrical wiring should be done by a qualified person(s) in accordance with all-applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury.
Conduit Range Hood Wire (unit side) Wire (conduit side) Wire Connector (not supplied) 3 Connect the electrical wires as follows: Connect wires tightly and securely using wire connectors (not supplied).
CIRCUIT DIAGRAM 120V 60Hz Indicating Lamp Lamp receptacle E26 (Lamp Max 60W) Control Switch AC125V 3A Lock Lock Release Reset Key Yellow Yellow Yellow Red 60W 60W Black White Green Connector Connector Connector Black Red Orange Brown Blue Red Orange Brown Blue Orange Brown Blue Capacitor 7 µ F 250VAC Gray Gray Gray Red White Model No.
Fuji Industrial Co., Ltd. 2-1-9 Fuchinobe, Sagamihara-shi, Kanagawa-ken 229-0006 Japan Tel. +81-42-753-1001 Fax. +81-42-753-1009 1U030381.
An important point after buying a device Fujioh FSR-3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujioh FSR-3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujioh FSR-3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujioh FSR-3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujioh FSR-3000 will certainly help you make a decision on the purchase.
If you already are a holder of Fujioh FSR-3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujioh FSR-3000.
However, one of the most important roles played by the user manual is to help in solving problems with Fujioh FSR-3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujioh FSR-3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
