Instruction/ maintenance manual of the product FinePix BL00494-200(1) FujiFilm
Go to page of 69
BL00494-200 ( 1 ) This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix E900 correctly. Please follow the instructions carefully. OWNER’S MANUAL 1 2 3 4 5 6 Getting Ready Setting.
2 3 W arning For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules.
4 5 1 2 3 4 5 6 Contents Warning .................................................................................. 2 IMPORTANT .......................................................................... 2 EC Declaration of Conformity .................
6 7 Preface ■ Test Shots Prior to Photography For important photographs (such as weddings and overseas trips), always take a test shot and view the image to make sure that the camera is working normally.
8 9 Example of LCD monitor text display ■ Photography mode 1/ 1/2005 12:00 AM ISO 400 ISO 400 6 2000 F2.8 N AF AF Self-timer Flash Photograph y mode Shutter speed Aper ture setting display Number of.
10 11 Getting Ready 1 LOADING THE BA TTERIES AND THE MEDIA Compatible batteries h AA-size Ni-MH rechargeable batteries (2) or AA-size alkaline batteries (2) (sold separately) 1 Check that the camera is turned off (LCD monitor or viewfinder lamp is off) before opening the battery cover.
12 13 Getting Ready 1 LOADING THE BA TTERIES AND THE MEDIA 4 Press on the battery cover to push the batteries down. Slide the battery cover closed. ◆ How to replace the xD-Picture Card ◆ Push the xD-Picture Card into the slot and then slowly remove your finger.
14 15 Getting Ready 1 TURNING ON AND OFF Move to Photography mode or Playback mode Press the “ w ” button during shooting to change to Playback mode. Press the “ w ” button again to return to Photography mode. Shooting b a Playback Press the “ w ” button for about 1 second to turn the camera on in Playback mode.
16 17 Getting Ready 1 CORRECTING THE DA TE AND TIME / CHANGING THE DA TE FORMA T 3 1 Press “ d ” to move to page number. 2 Press “ a ” or “ b ” to select “PAGE 3”.
18 19 Getting Ready 1 2 1 Press the “MENU/OK” button to display the menu on the LCD monitor. Press the “ w ” button for about 1 second. ERASE ERASE ALL FRAMES A L L F R A M E S FRAME F R A M E 1 2 ● ! Do not use the procedure for discharging rechargeable batteries with alkaline batteries.
21 Using the Camera 2 20 SELECTING THE LANGUAGE SET -UP S E T - U P SET SET 1 2 AUTO A U T O OFF O F F : : : : STD S T D : 1 2 1 Press “ d ” to move to page number.
22 23 Using the Camera 2 SELF-TIMER SELF-TIMER SET SET 1 2 AUT O A U T O OFF OFF OFF OFF : : : : 1 2 AUT O A U T O OFF O F F : : : : : OFF O F F SET S E T OFF O F F 1 2 AUT O A U T O OFF O F F : : : :.
24 25 Using the Camera 2 Bebeep ● ! The image shown on the LCD monitor before the picture is taken may differ in brightness, color, etc. from the image actually recorded. Play back the recorded image to check it ( ➡ P.29). ● ! The subject may be difficult to see clearly on the LCD monitor (in bright sunlight or dimly lit scenes, etc.
Click Bebeep 26 27 Using the Camera 2 NUMBER OF AVAILABLE FRAMES The number of available frames appears on the LCD monitor. ● ! See P.52 for information on changing the quality setting. ● ! The default quality “ ˘ ” set at shipment is “ ⁄ N”.
28 29 Using the Camera 2 SHOOTING ASSISTANT FUNCTION Select the framing guideline and post shot assist window in Photography mode. Pressing the “DISP/BACK” button changes the LCD monitor display.
30 31 Using the Camera 2 1 Te xt displayed No text display ed Multi-frame playbac k Sorting by date Sorting by date In Playback mode, press the “DISP/BACK” button to change the display shown on the LCD monitor. Press the “DISP/BACK” button until the sorting by date screen appears.
32 33 Using the Camera 2 Playback zoom Press the “ T ” or “ W ” button during single-frame playback to zoom the image. A zoom bar appears on the LCD monitor. Press “ a ”, “ b ”, “ d ” or “ c ” to display another part of the image.
34 35 Advanced Features 3 EXPOSURE ( SHUTTER SPEED AND APERTURE ) PHOTOGRAPHY FUNCTIONS Exposure refers to the light that hits the CCD or the total amount of captured light and determines the brightness of the image. The exposure is determined by the combination of aperture and shutter speed.
36 37 Advanced Features 3 T AKING PICTURES — SELECTING THE CAMERA SETTINGS PHOTOGRAPHY FUNCTIONS To achieve this result Sample settings To express the motion of the subject Set the Mode dial to “ M ” and select a slow shutter speed. Use a tripod to prevent camera shake.
38 39 Advanced Features 3 Set the Mode dial to “ À ”, “ U ”, “ . ” or “ / ”. This mode provides the best Scene position setting for the scene being shot. SELECTING PHOTOGRAPHY MODE PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ B ”.
40 41 Advanced Features 3 320 F6.4 Shutter speed 6 6 N N ISO 400 ISO 4 00 ISO 400 M SHUTTER-PRIORITY AUTO PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ M ”. This is an automatic mode to set the shutter speed. Use this mode to freeze a moving subject (fast shutter speed) or convey the impression of movement (slow shutter speed).
42 43 Advanced Features 3 320 F 6.4 Aperture 6 6 N N ISO 400 ISO 4 00 ISO 400 320 F 6.4 Shutter speed 6 6 N N ISO 400 ISO 4 00 ISO 400 > MANUAL PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ > ”. Use Manual mode to set any shutter speed and aperture setting.
44 45 Advanced Features 3 e MACRO ( CLOSE-UP ) PHOTOGRAPHY FUNCTIONS When using the viewfinder to take a picture in Macro mode, the field visible through the viewfinder does not match the field actually photographed. Because the viewfinder and lens are in different positions.
46 47 Advanced Features 3 x Auto flash Use this mode for ordinary photography. The flash fires as required by the shooting conditions. ● ! If pressing the shutter button while the flash is charging, the picture will be taken without the flash.
48 49 Advanced Features 3 1 Set the Mode dial to Photography mode. 2 1 Hold down the “ f ” button. 2 Press “ d ” or “ c ” to select the Continuous shooting mode. 3 Release the “ f ” button to confirm your selection. 3 When setting the Continuous shooting mode (except for “OFF”), the selected mode appears on the LCD monitor.
50 51 Advanced Features 3 This mode allows you to take up to 40 continuous shots (max. 0.6 frames/sec.). ● ! Long-period continuous shooting cannot be used in the “ N ”, “ M ” , “ < ”, “ > ” and “ r ” modes. ● ! Only 1 frame can be shot when using the Long-period continuous shooting mode and Self-timer mode together.
52 53 Advanced Features 3 QUALITY Q U A L I T Y N AUTO A U T O STD S T D F N : : : 1 Press “ a ” or “ b ” to select “ ˘ ” QUALITY. 2 Press “ c ”. 2 0 1 0 2 1 1 Set the Mode dial to Photography mode. 2 Press the “ p ” button to display the menu on the LCD monitor.
54 55 Advanced Features 3 : : STD S T D : 800 200 100 80 AUTO A U T O 400 AUTO A U T O AUTO A U T O N 1 Set the Mode dial to Photography mode. 2 Press the “ p ” button to display the menu on the LCD monitor. ● ! In “ r ” Movie mode, do not set the “ û ” (sensitivity) setting.
56 57 Advanced Features 3 ● ! The settings available in the menu screen vary depending on the Photography mode. 1 2 AUTO A U T O OFF O F F : : : : : 10SEC 1 0 S E C SET S E T OFF O F F STD S T D : 1 Press “ a ” or “ b ” to change the setting.
Bebeep Beep 58 59 Advanced Features 3 A countdown appears on the LCD monitor indicating the time remaining until the picture is taken. Self-timer mode is canceled after each shot. 9 4 1 2 AUTO A U T O OFF OFF : : : : : 10SEC 1 0 S E C SET S E T OFF O F F STD STD : 6 6 N N 1 Position the AF frame over the subject.
Beep 60 61 Advanced Features 3 PHOTOGRAPHY MENU PHOTOGRAPHY MENU CUSTOM C U S T O M 1 2 AUTO A U T O AUTO A U T O OFF O F F SET SET : : : : : STD S T D : 1 0 1 0 2 Use this setting to set the white balance for the ambient natural or artificial lighting in images.
62 63 Advanced Features 3 PHOTOGRAPHY MENU PHOTOGRAPHY MENU ✽ Displaying the menus ( ➡ P.56) H FOCUSING Available Photography modes: N , M , < , > Press the shutter button down halfway. The AF frame appears positioned on the high-contrast subject near the center of the image.
64 65 Advanced Features 3 PHOTOGRAPHY MENU PHOTOGRAPHY MENU ✽ Displaying the menus ( ➡ P.56) 250 F 5.6 6 6 N N ISO 400 I S O 4 00 ISO 400 K MF ( Manual Focus ) 1 Hold down the “ D ” button. 2 Press the “ T ” or “ W ” button to adjust the focus.
66 67 Advanced Features 3 ● ! This function cannot be used during multi-frame playback and sorting by date ( ➡ P.30). Use this function to check the photography information. Hold down the “ D ” button to check the information. 9/24/2005 10:00 AM 100-0009 STD S T D OFF OFF AUTO A U T O F ISO I S O 400 + 3 1 1/250 5.
68 69 Advanced Features 3 ERASE E R A S E ALL A L L OK? O K ? IT MA Y T AKE A WHILE I T M A Y TA K E A W H I L E YES Y E S CANCEL C A N C E L Pressing the “MENU/OK” button erases all the frames (files). ALL FRAMES ● ! Protected frames (files) cannot be erased.
70 71 Advanced Features 3 DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as an xD-Picture Card . The recorded specifications include information on which frames are to be printed.
72 73 Advanced Features 3 DPOF SETTING HAS BEEN D P O F S E T T I N G H A S B E E N COMPLETED C O M P L E T E D . TOT AL T O T A L COMPLETED C O M P L E T E D PRINT ORDER (DPOF) P R I N T O R D E R ( D P O F ) 9 SHEETS S H E E T S : 5 Total number of prints appears on the LCD monitor.
74 75 Advanced Features 3 ¸ DPOF SET FRAME PLAYBACK MENU T otal number of prints Setting for that frame DPOF D P O F PRINT ORDER (DPOF) P R I N T O R D E R ( D P O F ) SHEETS S H E E T S 01 FRAME F R A M E SET S E T 00009 : 5 Always press the “MENU/OK” button after the settings are completed.
76 77 Advanced Features 3 PRO TECT OK P R O T E C T O K ? YES Y E S CANCEL C A N C E L 1 Press “ d ” or “ c ” to select the protecting frame (file). 2 Press the “MENU/OK” button to protect the currently displayed frame (file). To protect another frame (file), repeat steps 1 and 2 .
78 79 Advanced Features 3 FA DE-IN FA D E - I N NORMAL N O R M A L FA DE-IN FA D E - I N M U LT I PLE LT I P L E CLOCK C L O C K NORMAL N O R M A L 1 2 FA DE-IN FA D E - I N 3 1 Press “ a ” or “ b ” to select the playback interval and the type of image transition.
80 81 Advanced Features 3 FINISH F I N I S H REC R E C RE-REC R E - R E C 28s After 30 seconds of recording, “FINISH” appears on the LCD monitor. To finish Press the “MENU/OK” button. To re-record your comment Press the “DISP/BACK” button.
82 83 Advanced Features 3 1 02 3 456 7 89 1 0 SET S E T CANCEL C A N C E L 1 Press the “MENU/OK” button while playing back voice memo. The voice memo is paused during playback. 1 02 3 4 5 6789 1 0 SET S E T CANCEL C A N C E L 2 Press “ d ” or “ c ” to adjust the volume.
84 85 Advanced Features 3 CANCEL C A N C E L YES Y E S TRIMMING T R I M M I N G ● ! Press the “DISP/BACK” button to return to single-frame playback. 5 1 Press “ a ”, “ b ”, “ d ” or “ c ” to display another part of the image. The current displayed image appears on the navigation screen.
86 87 Advanced Features 3 7 s s REC R E C 5 During recording, “ y REC” appears in the bottom- left corner of the LCD monitor and a counter that shows the remaining time appears in the top-right corner of the LCD monitor. ● ! If the brightness of the subject changes during movie recording, the sound of lens operation may be recorded.
88 89 Advanced Features 3 When paused ■ Playing back movies Playback Pause/Resume Stop Fast forward/Rewind Control Description Playback begins. Playback stops when the end of the movie is reached. Pauses the movie during playback. Press “ b ” again to resume playback.
90 91 Settings 4 1 Press the “MENU/OK” button to display the menu on the LCD monitor. SELF-TIMER S E L F - T I M E R SET SET 1 2 AUTO A U T O OFF O F F OFF O F F : : : : : STD S T D : ˜ USING THE SET-UP SCREEN 1 4 3 2 SET SET ENGLISH ENGLISH SET SET NTSC NTSC : SET SET PA G E P A G E 3 : : : : : 3 1 Press “ d ” to move to page number.
92 93 Settings 4 SET -UP ✽ How to use the SET-UP menu ( ➡ P.90) OFF O F F 1.5 SEC S E C SET S E T IMAGE DISP . I M A G E D I S P. 1 4 3 2 CONT . C O N T. CONT C O N T SET S E T 3 SEC S E C 1.5 SEC S E C : : : : : : Use this setting to specify whether images are displayed after shooting.
94 95 Settings 4 é FRAME NO. Specifies whether frame numbers are assigned consecutively from previous numbers or begin again. CONT.: Pictures are stored beginning from the highest file number stored on the last xD- Picture Card used. RENEW: Pictures are stored on each xD-Picture Card beginning with a file number “0001”.
96 97 Settings 4 ◆ To restore power to the camera ◆ 1 Press the “POWER” button to turn the camera back on for shooting. 2 Hold down the “ w ” button for about 1 second to play back images. When this function is enabled and the camera remains unused for 2 or 5 minutes, it is turned off.
99 Software Installation 5 98 6 When the Photography mode is selected with world time set, “ ß ” appears on the LCD monitor for 3 seconds and the date turns yellow.
100 101 Software Installation 5 5.2 INST ALLA TION ON A Mac OS X Pre-installation checklist To run this software, you must have the hardware and software described below.
103 Software Installation 5 102 10 The “FinePixViewer installation completed” message dialog appears. Then click exit button and close it. ● ! When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed.
104 105 Viewing Images 6 2 Vi deo (yellow) Audio (white) To terminals Plug the other end of the cable into the audio / video input socket on the TV. Then turn the camera and TV on and take pictures or play back images normally. ● ! When connecting the A/V cable to TV, the LCD monitor is turned off.
106 107 Viewing Images 6 6.2 CONNECTING THE CAMERA DIRECTL Y TO THE PRINTER — PictBridge FUNCTION 4 1 Press “ a ” or “ b ” to select “ u PRINT DPOF”. 2 Press “ c ”. ● ! When [ u NOT SET DPOF] appears, the DPOF settings are not specified.
108 109 Viewing Images 6 ● ! Movies and images with CCD-RAW cannot be printed. ● ! Images photographed with a camera other than FinePix E900 may not be printed. 5 1 Press “ d ” or “ c ” to display the frame (file) for which you want to specify PRINT settings.
USB socket (mini-B) A C-3VX (sold separately) 110 111 Viewing Images 6 USB socket h When the camera and PC are exchanging data, the self-timer lamp blinks and the viewfinder lamp blinks orange. h “ ¶ ” DSC appears on the LCD monitor. h Auto power off is disabled during USB connection.
DC IN 3V socket USB socket (mini-B) 112 113 Viewing Images 6 6.3 CONNECTING TO A PC 6.3.2 Disconnecting the camera 1 Windows Once the image has been saved, the window below appears (Save Image Wizard Windows). To disconnect the camera, click the [Remove] button.
115 114 System Expansion Options e By using FinePix E900 together with other optional FUJIFILM products, your system can be expanded to fill a wide range of uses.
116 117 Accessories Guide e Visit the FUJIFILM web site for the latest information on camera accessories. http://home.fujifilm.com/products/digital/index.
Adapter ring Filter Step up ring Te le Conversion Lens TL-FXE01 Adapter ring Wi de Conversion Lens WL-FXE01 Adapter ring 118 119 Overview of the conversion lens/adapter ring Mount the conversion lens or commercially available filters on the adapter ring.
120 121 Power Supply and Batteries Always use the AC Power Adapter AC-3VX (sold separately). The use of an AC power adapter other than AC-3VX can be damaged to your digital camera. h Use the AC power adapter for indoor use only. h Plug the connection cord plug securely into the DC input terminal of the FUJIFILM Digital camera.
BUSY 122 123 W arning Displays e The table below lists the warnings that are displayed on the LCD monitor. (Lit red) (Blinking red) The batteries are low or completely out of charge. Load new or fully charged batteries. Warning Displayed Explanation Remedy FOCUS ERROR ZOOM ERROR Camera malfunction or fault.
124 125 T roubleshooting e If you think the camera is faulty, check the following once more. Troubleshooting Possible causes Solutions No power. Power cuts out during operation. Batteries run out quickly. No photograph is taken when pressing the shutter button.
126 127 Specifications Model Digital camera FinePix E900 Effective pixels 9.0 million pixels CCD 1/1.6-inch Super CCD HR Storage media xD-Picture Card (16/32/64/128/256/512 MB/1 GB) File format Still image: DCF-compliant Compressed: Exif ver.
129 If you have technical questions or if you need repair service, ask the following local distributor. This product is provided with a warranty. Refer to the warranty card for detail. There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
131 Technical support 112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania & Repair service TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com Russia ZAO “Fujifilm RU” Technical support Bld. 1, 10, Rozanova str., Moscow, 123007, Russia TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.
132 FUJIFILM Digital Camera Worldwide Network TEL 00967-1-503977 FAX 00967-1-503983 AFRICA Egypt Foto Express Egypt Technical support 426 Pyramids St., Giza, Egypt & Repair service TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg Kenya Fuji Kenya Ltd Repair service P.
135 134 CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan http://home.fujifilm.com/products/digital/ Printed in Japan FPT - 507108 - YP Printed on recycled paper.
An important point after buying a device FujiFilm FinePix BL00494-200(1) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FujiFilm FinePix BL00494-200(1) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FujiFilm FinePix BL00494-200(1) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FujiFilm FinePix BL00494-200(1) you will learn all the available features of the product, as well as information on its operation. The information that you get FujiFilm FinePix BL00494-200(1) will certainly help you make a decision on the purchase.
If you already are a holder of FujiFilm FinePix BL00494-200(1), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FujiFilm FinePix BL00494-200(1).
However, one of the most important roles played by the user manual is to help in solving problems with FujiFilm FinePix BL00494-200(1). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FujiFilm FinePix BL00494-200(1) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
