Instruction/ maintenance manual of the product 1300 FujiFilm
Go to page of 41
.
3 2 Please read the Safety Notes ( ➡ P.76 ) and make sure you understand them before using the camera. For customers in the U.S.A. FCC Statement This device complies with part 15 of the FCC Rules.
5 @ CONTINUOUS SHOOTING ..................... 35 B SELF-TIMER PHOTOGRAPHY .............. 36 G SETTING THE BRIGHTNESS ( EXPOSURE COMPENSATION ) ............ 38 a SETTING THE WHITE BALANCE .......... 39 i MACRO ( CLOSE-UP ) PHOTOGRAPHY ... 40 E USING THE DIGITAL TELEPHOTO .
6 7 ● Superb high-quality images from the 1.31-megapixel CCD and high-resolution Fujinon lens ● Capable of recording images at resolutions up to 1280 ✕ 960 pixels ● Lightweight, compact body ● 1.
9 8 Nomenclature ✽ Refer to the pages in parentheses for information on using the camera features. Shutter button Self-timer lamp ( P .37 ) Flash control sensor Flash ( P .32 ) Viewfinder window Normal / Macro selector button ( P .40 ) Lens Digital ( USB ) socket ( P .
11 1 You can use the Setup screen on this camera to select English or French as the language used for screen display ( ➡ P.54). The screens in this manual are shown in English. ➀ Pass the loop of this cord on the end of the strap through the strap mount.
13 1 12 SELECTING THE POWER SUPPL Y 1 Slide the battery cover in the direction of the arrow and open the cover. ● ! Soiling such as fingerprints on the battery terminals can markedly reduce the number of available shots ( ➡ P.67). ● ! Do not use new and used batteries together.
15 1 14 ➀ Check that the camera is switched off. Then use the lock release button to unlock the slot cover and open the cover. ➁ Push the SmartMedia firmly into the SmartMedia slot as far as it will go.
17 1 On On Blank 1 SETTING THE DA TE AND TIME ➀ Use the “ ab ” button to select “ DATE / TIME ” . ➁ Press the “ MENU/OK ” button. ● ! Once the AC power adapter has been connected or .
19 2 Set the mode dial to “ E ” . To take pictures using the viewfinder (excluding Macro Photography), or the LCD monitor, press the “ DISP ” button to switch the LDC monitor on.
21 2 20 4 Use the LCD monitor or viewfinder to position the subject close to the center of the frame. T AKING PICTURES ( AUTO MODE ) Ensure that your fingers or the camera strap do not obscure the lens, flash, or flash control sensor. 3 LCD Monitor Finder ● ! Check that the lens is clean.
23 2 Number of available frames The number of available shots is displayed on the LCD monitor in the location shown in the figure at left. ● ! See P.56 for information on changing the File Size (number of pixels) and Quality (compression ratio) settings.
25 2 PLA YBACK ZOOM Pressing “ a ” or “ b ” during playback enlarges the image or reduces the image within the limits of the zoom bar. After you have zoomed in on your image, ➀ Press the “ DISP ” button. ➁ Use the “ ab ” and “ dc ” buttons to zoom in on different parts of the image.
27 2 26 ➡ ERASING SINGLE FRAME ➀ Set the mode dial to “ D ” . ➁ Press the “ MENU/OK ” button to display the menu screen on the LCD monitor. ➀ Use “ d ” or “ c ” to select “ FRAME ” in the “ n ERASE ” menu. ➁ Press the “ MENU/OK ” button.
29 3 28 The Advanced Photography section introduces a range of camera functions that you can access by setting the Mode dial to “ E ” . { Auto Flash ( ➡ P.32) [ AUTO/ o / f / p / ? ] @ Continuous Shooting ( ➡ P.35) [ ON/OFF ] B Self-Timer ( ➡ P.
31 3 30 SELECTING THE MODE PHOTOGRAPHY MENU Select “ E AUTO ” or “ E MANUAL ” and press the “ MENU/OK ” button. This is the simplest mode to use and has a wide range of applications. ✽ You can specify the settings for “ f ” ( ➡ P.32), “ @ ” ( ➡ P.
33 3 32 f Forced Flash Use this flash mode to photograph backlit scenes, such as a subject against a window or in the shade of a tree, or to obtain the correct colors when you are shooting under lighting such as fluorescent tubes. In this mode, the flash fires in bright as well as dark conditions.
35 3 34 CONTINUOUS SHOOTING PHOTOGRAPHY MENU You can set the continuous shooting when the photography mode is set to “ { ” . When you select “ ON ” , the following settings automatically chang.
37 3 The time remaining until the picture is taken is counted down on the LCD monitor. The self-timer lamp lights for 5 seconds, blinks for 5 seconds, then takes the picture. ● ! Self-timer mode is cancelled after you take the picture. ● ! To stop the self-timer once it has started running, press the “ b ” button.
39 3 38 SETTING THE WHITE BALANCE PHOTOGRAPHY MENU : Automatic adjustment (Shooting to show the ambience of the light source) s : Shooting outdoors in fine weather : Shooting in shade : Shooting under.
41 3 40 Digital telephoto photography allows you to enlarge the central portion of the image. Digital telephoto photography can only be used for images shot using the LCD monitor that have a file size setting of “ 640 ✕ 480 ” . If you press “ a ” when you are taking pictures, the image enlarges and “ 2.
43 4 42 If you press the “ MENU/OK ” button, the menu screen will appear on the LCD monitor. 1 ● ! To exit the menu, use the “ d ” or “ c ” button to select “ [ BACK ” and then press the “ MENU/OK ” button. Erases only the selected image.
45 4 Press the “ MENU/OK ” button to display the menu on the LCD monitor. ➀ Use the “ d ” or “ c ” button to select “ g PROTECT ” . ➁ Use the “ ab ” button to select “ FRAME SET RESET ” . ➂ Press the “ MENU/OK ” button.
47 4 46 Press the “ MENU/ OK ” button to display the menu on the LCD monitor. ➀ Use the “ d ” or “ c ” button to select “ g PROTECT ” . ➁ Use the “ ab ” button to select “ PROTECT ALL ” or “ UNPROTECT ALL ” . ➂ Press “ MENU/ OK ” button.
49 4 48 With the FinePix1300, you can order prints using the Digital Print Order Format (DPOF). You can use the DPOF to specify the following: ● The frames to be printed and the number of prints for each frame ● Imprinting of the date and time This section gives a detailed description of how to order your prints with the FinePix1300.
51 4 1 ➀ Use the “ ab ” button to select “ FRAME SET/ RESET ” . ➁ Press the “ MENU/OK ” button. ● ! To exit the menu, use the “ d ” or “ c ” button to select “ [ BACK ” and then press the “ MENU/OK ” button.
53 4 1 ➀ Use “ a ” or “ b ” to select “ SET ALL ” or “ RESET ALL ” . ➁ Press the “ MENU/OK ” button. 2 When you press the “ MENU/OK ” button, a confirmation screen appears. To proceed with the set or reset operation, press “ MENU/OK ” .
Settings 55 5 54 Set the mode dial to “ F ” . Use the “ ab ” buttons to select the desired item and then use the “ d ” and “ c ” buttons to change and confirm the setting(not including the date /time setting and the file size/quality setting).
57 5 56 FRAME NO. MEMOR Y You can check the file number by viewing the image. The last 4 digits of the 7-digit number displayed in the top-right corner of the screen show the file number. The first 3 digits show the directory number. ● ! When replacing the SmartMedia, always switch the camera off before you open the slot cover.
59 58 ADJUSTING THE LCD MONITOR BRIGHTNESS ➀ If you hold down the “ DISP ” button for about 2 seconds, the brightness adjustment screen appears. ➁ Use the “ d ” and “ c ” buttons to adjust the brightness. ➂ Press the “ MENU/ OK ” button.
61 60 When the viewfinder lamp is lit orange or blinking green, data access (downloading) is in progress. Never open the slot cover or disconnect the cable during data access. This can prevent data downloading and cause camera malfunctions. ● ! Always use the Interface Set provided with this product.
63 62 ● SM-R1/ R2 Image Memory Card Reader The SM-R1/ R2 allows images to very easily be read and written from an image memory card (SmartMedia) to a personal computer. Its USB interface provides high-speed data transmission. ● Windows98, Windows 2000 Pro or Power Macintosh with USB interface.
65 64 Notes on Using Y our Camera Correctly ■ Places to Avoid Do not store or use the camera in the following types of locations: ● Very humid, dirty or dusty places ● In direct sunlight or in places subject to extreme temperature rises, such as in a closed car in summer.
67 66 ● Soiling such as fingerprints on the battery terminals can markedly reduce the number of available shots. Carefully wipe the battery terminals clean with a soft dry cloth before loading the batteries. If any liquid at all leaks from the batteries, wipe the battery compartment thoroughly and then load new batteries.
69 68 ● To avoid damage caused by static electricity, always use the special static-free case provided during transportation or storage, or keep the SmartMedia in a storage case if available. ● Do not carry SmartMedia in locations such as a trouser pocket.
2 3 71 70 Switch the Frame NO. Memory function off and use a formatted SmartMedia to take the picture. Explanation The frame number has reached 999- 9999. There is a strong likelihood of camera shake because the shutter speed is slow. A protected frame was erased.
73 72 I can ’ t use the flash to take pictures. The flash will not charge. The playback image is too dark even though I used the flash. The image is blurred. I cannot format the SmartMedia. I cannot erase all the frames. Nothing happens when I use the camera buttons and switches.
75 74 Specifications ● Model Digital Camera ● Pickup Elements 1/ 2.7-inch square pixel CCD (1.31 million pixels) ● Resolution 1280 ✕ 960 pixels / 640 ✕ 480 pixels ● File format JPEG (Exif Ver.
77 76 Never attempt to modify or disassemble the camera. (Never open the casing.) Do not use the camera when it has been dropped or the casing is damaged. This can cause a fire or electric shock. ● Contact your Fuji dealer. Never attempt to take pictures whilst in motion.
78 Do not use this camera in locations severely affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
Printed in Japan FGS-002108-FG Printed on recycled paper..
An important point after buying a device FujiFilm 1300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FujiFilm 1300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FujiFilm 1300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FujiFilm 1300 you will learn all the available features of the product, as well as information on its operation. The information that you get FujiFilm 1300 will certainly help you make a decision on the purchase.
If you already are a holder of FujiFilm 1300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FujiFilm 1300.
However, one of the most important roles played by the user manual is to help in solving problems with FujiFilm 1300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FujiFilm 1300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
