Instruction/ maintenance manual of the product L0806995 Frigidaire
Go to page of 8
installation instructions For Heavy Duty (FAS Models) and Median (FAM Models) Air Conditioners Please read ALL instructions before installing. Two people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing unit, See#5 in Preliminary Instructions following.
4. CHECK FOR ANYTHING THAT COULD BLOCK AIRFLOW - check area outside of window for things such as shrubs, trees, or awnings. Inside, be sure furniture, drapes, or blinds will not stop proper air flow. 5. Check the available electrical service - power supply must be the same as that shown on the unit serial nameplate.
"ndow Mounting g Remove Chassis 1. Pull down front panel and remove filter. (See FIG. 1). 2. Lil_ front upwards and place to one side. D Install Top Angle and Side Bracket 1. Attach foam gasket to top angle above holes as shown in FIG. 6. 3. Locate the four front screws and remove.
3. Insert top and bottom legs of window filler panel frame into channel in the to angle and bottom rail. Do both sides. 4. Insert washer head locking screws (2) into holes in top leg d filler panel frame (see Step 6). Do not totally tighten. Allow leg to slide freely.
Extend Window Filler ........... Panels 1. Carefully raise window to expose filler panel locking screws. Loosen screws so filler panels slide easily. install Chassis into Cabinet and install Front to Unit 1, Lift air conditioner and carefully slide into cabinet leaving 6" protruding, 2.
Thru-The-Wall installation NOTE: Consult local building codes prior to installation, or a qualified carpenter. Select Wall Location This air conditioner has a slide-out chassis, so that it can be installed through an outside wall as specified below: Heavy Duty(FAS) Median (FAM) Max wall thickness 10" 8" IMPORTANT: Side louvers must never be blocked.
NOTE: If wall thickness is 8-1/2" or more, add aluminum flashing over bottom of frame opening to assure no water can enter area between inner and outer wall. 1"LONG SCREW FIG. 2 ALUMINUM FLASHING OVER BOTTOM OF FRAME I Prepare and Install Cabinet Refer to Step 4 d Window Mounting for assembly of support brackets.
OPTIONAL: Caulking and installation of trim on interior wall may be done. You can buy wood from your local lumber or hardware supply. On the outside, caulk openings around top and sides of cabinet, and all sides of wood sleeve to the opening. NOTE: See Step 7, Item 3 of Window Mounting Instructions for bottom rail seal location.
An important point after buying a device Frigidaire L0806995 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frigidaire L0806995 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frigidaire L0806995 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frigidaire L0806995 you will learn all the available features of the product, as well as information on its operation. The information that you get Frigidaire L0806995 will certainly help you make a decision on the purchase.
If you already are a holder of Frigidaire L0806995, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frigidaire L0806995.
However, one of the most important roles played by the user manual is to help in solving problems with Frigidaire L0806995. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frigidaire L0806995 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
