Instruction/ maintenance manual of the product MRV-T320 Alpine
Go to page of 16
1 Español Français English R • OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference.
2 Español Français English Introduction: Please read this OWNER'S MANUAL thoroughly to fa- miliarize yourself with each control and function. We at ALPINE hope that your new MRV-T420/MRV -T320 will give you many years of listening enjoyment.
3 Español Français English DO NOT ALLOW CABLES TO BECOME ENT ANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever , brake pedals, etc.
4 Español Français English INST ALLA TION Due to the high power output of the MRV-T420/MRV - T320, considerable heat is produced when the amplifier is in operation. For this reason, the amplifier should be mounted in a location which will allow for free circula- tion of air , such as inside the trunk.
5 Español Français English MONT AGE DES COUVERCLES D’ACHEVEMENT • L ’apparence du produit peut être améliorée en mon- tant les couvercles d’achèvement sur l’unité centrale après l’installation. • Montez les couvercles d’achèvement une fois que l’unité centrale a été installée.
6 Español Français English CONNECTIONS Before making connections, be sure to turn the power off to all audio components. Connect the yellow battery lead from the amp directly to the positive (+) terminal of the vehicle's battery . Do not connect this lead to the fuse block.
7 Español Français English In the bridged mode, connect the left positive to the positive terminal on the speaker and the right nega- tive to the negative terminal of the speaker . Do not use the speaker (–) terminals as a common lead between the left and right channels.
8 Español Français English Cautions on wire lead connections When using third-party wire cables (power supply cord), use the supplied hex screws and the hex wrench to sim- plify the connection. Refer to the description below for the proper procedure.
9 Español Français English CONNECTIONS CHECK LIST Please check your head unit for the conditions listed below: a. The head unit does not have a remote turn-on or power antenna lead. b. The head unit's power antenna lead is activated only when the radio is on (turns off in the tape or CD Mode).
10 Español Français English MOUNTING THE TERMINAL COVER • The product’ s appearance can be improved by mount- ing the terminal cover on the main unit after installa- tion. • Mount the terminal cover after the connections have been made and you have checked that operation is normal.
11 Español Français English SWITCH SETTINGS Input Gain Adjustment Control Set the MRV-T420/MRV -T320 input gain to the mini- mum (4V) position. Using a dynamic CD as a source, increase the head unit volume until the output dis- torts. Then, reduce the volume 1 step (or until the output is no longer distorted).
12 Español Français English Crossover Mode Select Switch (HP) a) Set to the "HP" position when the ampli- fier is used to drive a tweeter/midrange system.
13 Español Français English ● Single Channel System/Système de canal unique/Sistema de canal único SYSTEM DIAGRAMS/DIAGRAMMES DU SYSTEME/DIAGRAMAS DEL SISTEMA MRV-T420/MRV -T320 ● 2-Channel Stereo System/Système stéréo à 2 canaux/Sistema estéreo de 2 canales [English] RCA Extension Cable (Sold Separately) Head Unit etc.
14 Español Français English MRV-T420/MRV -T320 ● Single Channel Stereo System/Système stéréo de canal unique/Sistema estéreo de canal único MRV-T320 ● Speaker Input Leads System/Système des conducteurs d’entrée de haut-parleur/Sistema de los conductores de entrada del altavoz ★ Use either RCA line level or speaker level inputs.
15 Español Français English ESPECIFICACIONES Salida de potencia: Potencia continua RMS (a 12,0V , de 20 Hz a 20 kHz) Por canal en 4 ohmios (0,08% DA T) ..... MR V -T420: 75Wx2 MR V -T320: 50Wx2 Por canal en 2 ohmios (0,3% DA T) ..... MR V -T420: 120Wx2 MR V -T320: 80Wx2 Ponteado en 4 ohmios (0,3% DA T) .
16 Español Français English R K ukje Printing Co., Ltd 127-2 Gamjeon-dong Sasang-gu Busan K orea ALPINE ELECTRONICS, INC. T okyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, T okyo 141-8501, J apan T el.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC.
An important point after buying a device Alpine MRV-T320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alpine MRV-T320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alpine MRV-T320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alpine MRV-T320 you will learn all the available features of the product, as well as information on its operation. The information that you get Alpine MRV-T320 will certainly help you make a decision on the purchase.
If you already are a holder of Alpine MRV-T320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alpine MRV-T320.
However, one of the most important roles played by the user manual is to help in solving problems with Alpine MRV-T320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alpine MRV-T320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
