Instruction/ maintenance manual of the product MRP-M200 Alpine
Go to page of 12
R • OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference.
2 Español Français English Introduction: Please read this OWNER'S MANUAL thoroughly to fa- miliarize yourself with each control and function. We at ALPINE hope that your new MRP-M200 will give you many years of listening enjoyment. In case of problems when installing your MRP-M200, please contact your authorized ALPINE dealer .
3 Español Français English DO NOT ALLOW CABLES TO BECOME ENT ANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever , brake pedals, etc.
4 Español Français English INST ALLA TION Due to the high power output of the MRP-M200, con- siderable heat is produced when the amplifier is in op- eration. For this reason, the amplifier should be mounted in a location which will allow for free circulation of air , such as inside the trunk.
5 Español Français English Fig. 2 RCA Input Jacks Connect these jacks to the line out leads on your head unit using RCA extension cables (sold sepa- rately). Be sure to observe correct channel connec- tions; Left to Left and Right to Right. Speaker Output T er minals The MRP-M200 has two sets of speaker outputs.
6 Español Français English MRP-M200 Fig. 3 CONNECTIONS CHECK LIST Please check your head unit for the conditions listed below: (Fig. 3) a. The head unit does not have a remote turn-on or power antenna lead. b. The head unit's power antenna lead is activated only when the radio is on (turns off in the tape or CD Mode).
7 Español Français English Fig. 4 SWITCH SETTINGS High-pass Output Phase Switch Sets the phase of this output to 0 ° (in phase) or 180 ° (inverted) independently from the other output.
8 Fig. 5 SYSTEM DIAGRAMS/DIAGRAMMES DU SYSTEME/DIAGRAMAS DEL SISTEMA ● One Speaker System/Système à un haut-parleur/Sistema de un altavoz 25 25A FUSE POWER SUPPLY BATTERY REMOTE GND MONO – + SPE.
9 ★ Use either RCA line level or speaker level inputs. Do not connect both at the same time./Utiliser les entrées de niveau de ligne RCA ou de niveau de haut-parleur . Jamais les connecter à la fois./Utilice las entradas de nivel de altavoz o de nivel de línea RCA.
10 Español Français English ESPECIFICACIONES Salida de potencia: Potencia continua RMS (a 14,4V , de 20 Hz a 200 Hz) Por canal en 4 ohmios (0,08% DA T) .......... 150Wx1 Por canal en 2 ohmios (0,3% DA T) ............ 200Wx1 Potencia máxima total ..
.
Español Français English SERVICE CARE IMPORT ANT NOTICE This Amplifier has been type tested and found to com- ply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules.
An important point after buying a device Alpine MRP-M200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alpine MRP-M200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alpine MRP-M200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alpine MRP-M200 you will learn all the available features of the product, as well as information on its operation. The information that you get Alpine MRP-M200 will certainly help you make a decision on the purchase.
If you already are a holder of Alpine MRP-M200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alpine MRP-M200.
However, one of the most important roles played by the user manual is to help in solving problems with Alpine MRP-M200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alpine MRP-M200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
