Instruction/ maintenance manual of the product FC-380 Series Franklin Industries, L.L.C.
Go to page of 8
Franklin Chef ™ Compact Refrigerator Refrigerador compacto Réfrigérateur compact Be sure that refrigerator is standing upright 24 hours prior to plug-in Use & Care Guide (pages 1 - 7) Guía de.
IMPORTANT SAFEGUARDS Read all instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1 . Use this appliance only for its intended purpose as described in this instruction manual.
Table of Contents Safety Instructions ............................................................................... 1 Location of Parts .................................................................................. 2 Energy-Saving Tips .........
Energy-Saving Tips ¤ Do not place your refrigerator next to a heating vent, a range or in direct sunlight. ¤ Keep the door closed as much as possible, especially in hot, humid weather. ¤ Defrost the freezer compartment whenever frost becomes 1 4 inch thick.
Operating Your Refrigerator Please do not plug in the refrigerator for 24 hours after unit is set in place. Failure to do so may result in the unit working improperly. Thermostat The thermostat has settings from MIN to MAX , plus OFF . MIN is the warmest.
Care and Cleaning Cleaning the Outside Clean the outside of the refrigerator with a mild solution of soapy water. Dry thoroughly with a soft cloth. To clean the door gasket, use only mild, soapy water. Never use harsh cleansers or scouring pads to clean any part of the refrigerator.
Troubleshooting Refrigerator does not operate – Not plugged in. – Thermostat is in OFF position. – Circuit breaker tripped or fuse blown. Turns on and off frequently – This is normal. Small refrigerators cycle more than larger ones. Seems to run too long – Check for proper clearances.
Limited Warranty Franklin Industries, L.L.C., warrants this product to be free fro m defects in materials and workmanship for a period of one year from the date of the original purchase or delivery.
An important point after buying a device Franklin Industries, L.L.C. FC-380 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Franklin Industries, L.L.C. FC-380 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Franklin Industries, L.L.C. FC-380 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Franklin Industries, L.L.C. FC-380 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Franklin Industries, L.L.C. FC-380 Series will certainly help you make a decision on the purchase.
If you already are a holder of Franklin Industries, L.L.C. FC-380 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Franklin Industries, L.L.C. FC-380 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Franklin Industries, L.L.C. FC-380 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Franklin Industries, L.L.C. FC-380 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
