Instruction/ maintenance manual of the product FDW 908 IB XS Franke
Go to page of 20
Instructions for use and installation Cooker Hood Istruzioni per l’uso e l’installazione Cappa Mode d’emploi et installation Hotte de Cuisine Bedienungsanleitung und Einrichtung Dunstabzugshaube.
2 2 INDEX RECOMMENDATIONS A ND SUGGEST IONS ..................................................................................................................... 3 CHARACTER ISTICS ......................................................................
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instruct ions for Us e apply to severa l versions of this appliance . Accordingly, you may find descrip tions of individu al features that do not apply to your sp ecific appl iance.
EN 4 4 CHARACTERISTICS Components Ref. Q.ty Product Components 1 1 Hood Canopy complete with: Controls, Light, Filters 2 1 Motor unit 3 1 Electric unit 4 1 Front Frame Ref. Q.ty Installation Components 7.1 2 Splashback Fixing Bracket 7.2 2 Hob Fixing Bracket 7.
EN 5 5 Dimensions This Cooker hood can be used in conjunction with a Gas Cook Top having the following characteris tics: • Maximum power 12,4 kW • 5 fire like the picture 2,6 kW 5 kW 1,9 kW 1,9 kW.
EN 6 6 INSTALLATION This Hood is set up to be f itt ed in side the kitchen unit in: • Ducting version : Evacuation to th e outside. • Recirculation version : Internal recirculation .
EN 7 7 7.2 12a 7.2 12a A Inserting the Hood Canopy into the support surface from bel ow • The Hood is built read y for front installation of the Mo- tor Unit.
EN 8 8 7.2 12a 7.2 12a Inserting the Hood Canopy into the support surface from above • Insert the Brackets 7.2 , as indi- cated in the figure, into the slots provided and fix them with the screws 12a provided. • The Hood is built ready for front in- stallation of the Motor Unit.
EN 9 9 12c 12a 7.1 12a 7.1 Fixing the Lower Brackets • Screw the brac kets 7.1 to the front of the Hood Canopy using the screws 12a provided. • Before tightening the Brackets completel y, make all the adjustments to allow them to rest on the lower base of the worktop to avoid deformation of the upper brackets 7.
EN 1 10 Fixing the Squaring Brackets • Screw the brackets 7.3 to the Hood Canopy using the screws 12b provided, without tightening completel y. • Using the screws 12c provided, fasten the oth er part of the brackets 7.3 either to the side walls of the unit or to the lower part of the cooker top.
EN 1 11 A Fixing the Motor Unit • Installation of the Motor Unit ( 1 ) at the front or rear must be de- cided according to the position of the Kitchen unit, making sure that the plug is properly positioned.
EN 1 12 Fixing the Electric Unit • Connect the Electric cables that come out of the lower right hand part of the Hood Canopy to the Connectors on the Electric unit. • Each cable connector has a corresponding connector on the Electric Unit, so take care not to make mistakes when connecting up.
EN 1 13 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexib le or rigid pipe ø 150 or 120 mm, the choice of which is left to the insta ller. • To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet.
EN 1 14 Warning..: Handle with care Fitting the Front element • Lift the mobile hood canopy (see paragraph on Use) by just a few centimetres. • To stop movement , simply press down on the mobile can- opy as it lifts up .
EN 1 15 Surround Suction Panel • Open the Hood Door (see USE). • Remove the 2 strips of adhesive tape fastening the panel during transport..
EN 1 16 USE Control panel Button Function LED button A The bu tton only works when the door is open . Press B riefly = Turn s the Lights On/ Off at maximum intensi ty. Press and hold for 2 Seconds = Turns the Courtesy Lights On/Off. B Door Open or C losed Press briefly = Perfor ms a Reset of the Filter sat uration alarm.
EN 1 17 REMOTE CONTROL (OPTIONAL) The appliance can be controll ed using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type (not included). • Do not place the rem ote control near to heat sour ces. • Used batteries must be disposed of in the proper manner.
EN 1 18 MAINTENANCE Cleaning the Comfort Panels • Open the Comfort Panel by pulling it at the top. • Unhook the security chain b y opening th e spring catch. • Disconnect the panel from the hood canopy. • The comfort panel m ust never be washed in the d ishwasher.
EN 1 19 Activated Charcoal Filter (Recirculation Versi o n) Can be washed in the dishwasher. It must be washed when button “C” lights up or at least once every 4 months, or more frequently if use is particu larly intense. Guaranteed to operate after washing for up to a maximum of 5 times be fore requiring replacement.
991.0266.34 2_ver 4 Franke S.p.a. Via Pignolini,2 37019 Peschiera del Garda (VR) www.franke.it.
An important point after buying a device Franke FDW 908 IB XS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Franke FDW 908 IB XS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Franke FDW 908 IB XS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Franke FDW 908 IB XS you will learn all the available features of the product, as well as information on its operation. The information that you get Franke FDW 908 IB XS will certainly help you make a decision on the purchase.
If you already are a holder of Franke FDW 908 IB XS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Franke FDW 908 IB XS.
However, one of the most important roles played by the user manual is to help in solving problems with Franke FDW 908 IB XS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Franke FDW 908 IB XS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
