Instruction/ maintenance manual of the product SI255D-Gen Foundations
Go to page of 4
• Failure to follow these warnings and the installation instructions could result in serious injury or death. • Read all instructions before installing diaper changing station.
1 ADUL T INST ALLA TION REQUIRED. TOOLS REQUIRED: L evel (A) Measuring tape (B) Power drill with 7/32”, 1/8” and 1/2” masonry bits (C) Power screwdriver with bull nose phillips bit (D) • READ ALL INSTRUCTIONS BEFORE ASSEMBL Y OF Diaper Changing Station.
2 1. Locate wood stud where left side of changing station will be mounted to the wall. 2. Measure up 61” (155 cm) from the floor and mark the wall. This locates the position for the top left attachment hole. NOTE: Mark on wall MUST be in center of wood stud.
3 RECOMMENDED BLOCKING: If the walls do not have studs on center , then additional blocking is necessary ( Fig. e) . Contact an architect or building contractor to make sure the blocking is adequate and complies with building codes. OPERA TION: Rotate base downward.
An important point after buying a device Foundations SI255D-Gen (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Foundations SI255D-Gen yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Foundations SI255D-Gen - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Foundations SI255D-Gen you will learn all the available features of the product, as well as information on its operation. The information that you get Foundations SI255D-Gen will certainly help you make a decision on the purchase.
If you already are a holder of Foundations SI255D-Gen, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Foundations SI255D-Gen.
However, one of the most important roles played by the user manual is to help in solving problems with Foundations SI255D-Gen. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Foundations SI255D-Gen along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
