Instruction/ maintenance manual of the product V32S FMI
Go to page of 24
For more information, visit www .fmiproducts.com W ARNING: If the information in this manual is not .
www .fmiproducts.com 108662-01L 2 SAFETy .
www .fmiproducts.com 108662-01L 3 .
www .fmiproducts.com 108662-01L 4 PRODUCT FEA TURES OPERA TION This rebox is designed for use with approved ANS I Z21 .1 1.2 deco rat iv e typ e unve nt ed room heat ers. (Physic al size limita tion s apply . Refer to minimum rebox requirements supplied with log heater.
www .fmiproducts.com 108662-01L 5 25 1 / 8 " 29 1 / 2 " 34 7 / 16 " 36 3 / 8 " Standoffs 22 1 / 2 " 4" 29 1 / 2 " 16 3 / 4 " 18 7 / 16 " 32 1 / 4 " 36.
www .fmiproducts.com 108662-01L 6 PRODUCT SPECIFICA TIONS Continued 36" AND 42" MODELS Note: If only one dimension is shown, the dimension is the same for both 36" and 42" mod- els.
www .fmiproducts.com 108662-01L 7 AIR FOR COMB USTION AND VENTILA TION The air that leaks around doors and windows may provide enough fresh air for combustion and ventilation.
www .fmiproducts.com 108662-01L 8 DETERMINING FRESH-AIR FLOW FOR HEA TER LOCA TION Use this work sheet to determine if you have a conned or unconned space.
www .fmiproducts.com 108662-01L 9 VENTILA TION AIR This fresh air would come from an adjoining unconned space.
www .fmiproducts.com 108662-01L 10 IMPORT ANT : V ent-free gas log heaters add moisture to the air . Although this is benecial, ins tal lin g r ebo x i n r ooms wi tho ut enoug h ventilation air may cause mildew to form from too much moisture. See Air for Combustion and V entilation , page 7.
www .fmiproducts.com 108662-01L 11 55 5 / 8 " 39 3 / 8 " 34 1 / 2 " 27 3 / 4 " 0" CLEARANCE 0" CLEARANCE *10 1 / 2 " *10 1 / 2 " * These dimensions allow for min. Clearances to a 45° projected side wall. However , clearances to projected mantel trims and facings are allowed within a min.
www .fmiproducts.com 108662-01L 12 IMPORT ANT : If installing blower accessory (circulating models with louvers only), see Hard-Wiring Firebox, page 16. 3. Car ef ull y set reb ox in fro nt of roug h open - ing with back of rebox inside wall open - ing.
www .fmiproducts.com 108662-01L 13 INST ALLA TION Continued INST ALLING GAS LINE - .
www .fmiproducts.com 108662-01L 14 INST ALLA TION Continued Decide which way you intend to gain access into the bottom rear of the rebox to install the blower accessory . The lower front panel can be removed easily by snapping out the front with a at blade screwdriver .
www .fmiproducts.com 108662-01L 15 INST ALLA TION Continued bracket (see Figure 14). Secure speed control to bracket with lock nut by pushing and turning lock nut with pliers clockwise until it is tight against bracket. 7. Remove knockout plug from louver panel by pressing top and bottom retaining clips (see Figure 1 1, page 13).
www .fmiproducts.com 108662-01L 16 3 . Using screws provided, fasten upper ang e of blow er brack et to hearth pan and end anges to leg stands (see Figure 16, page 15). Note: The wire assembly must be ar - ranged in front of and away from fan blades to reach power receptacle plug.
www .fmiproducts.com 108662-01L 17 INST ALLA TION Continued COMBUSTION AIR KIT MODEL AK4 The outside air kit may be installed on the left side of the replace only . The vent can be installed through any outside wall a minimum of three feet below replace termination cap.
www .fmiproducts.com 108662-01L 18 REPLACEMENT P ARTS NOTICE: All accessories may Purc has e these acces sori es fro m your loca l de al er .
www .fmiproducts.com 108662-01L 19 ACCESSORIES Continued MANTELS 32" W ALL MANTELS W32TU - 32" Unnished, T raditional W32TO - 32" Oak Stain, T raditional W32CO - 32" Oak Stain, .
www .fmiproducts.com 108662-01L 20 1 2 3 6 7 9 28 29 4 8 14 12 13 1 1 16 15 10 17 18 19 24 25 26 23 27 22 21 20 5 P ARTS MODELS V32, V32A, V32S, V32AS, VFB32C, VFB32AC, VFB32NC, VFB32ANC.
www .fmiproducts.com 108662-01L 21 P ARTS This list contains replaceable parts used in your rebox. When ordering parts, follow the instructions listed under Replacement Parts on page 18 of this manual.
www .fmiproducts.com 108662-01L 22 1 2 3 4 8 12 13 14 15 21 24/25 23 20 19 18 16 29 30 1 1 31 5 28 32 10 9 6 26 22 17 P ARTS MODELS CUVF36C, V36, V36A, V36S, V36AS, V36ASH, V36H, V36AH, V36SH, VFB36AC.
www .fmiproducts.com 108662-01L 23 KEY P ART NUMBER DESCRIPTION V36S, V36AS V36ASH V36SH, VFB36NC1 VFB36ANC CUVF36C V36, V36A V36H, V36AH, VFB36C1 VFB36AC V42S, V42AS V42ASH V4.
108662-01 Rev . L 09/09 WARRANTy KEEP THIS WARRANTy FMI PRODUCTS, LL C LIMITED WARRANTIES New Products Standard Warranty: FMI PRODUCTS, LLC warrants this new product and any parts thereof to be free f.
An important point after buying a device FMI V32S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FMI V32S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FMI V32S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FMI V32S you will learn all the available features of the product, as well as information on its operation. The information that you get FMI V32S will certainly help you make a decision on the purchase.
If you already are a holder of FMI V32S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FMI V32S.
However, one of the most important roles played by the user manual is to help in solving problems with FMI V32S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FMI V32S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
