Instruction/ maintenance manual of the product 07-402 Fluke
Go to page of 10
Nuclear Associates 07-402 Portable Digital Thermometer Operators Manual August 2007 Manual No. 07-402-1 Rev. 3 © 2004, 2005, 2007 Fluke Co rporation, A ll rights reserved.
(Blank Page).
Table of Contents Section 1: Introducti on ................................................................................................ 1-1 1.1 Introduc tion .........................................................................................
(Blank Page).
1 Introduction Introduction 1-1 Section 1 Introduction 1.1 Introduction The Portable Digital Thermometer provides a rapid and reliable means of checking solution temperatures in x-ray film processors. It features a detachable temperature-sensing probe with a 3-foot coiled cord, and an LCD digital display.
Nuclear Associates 07-402 Operators Manual (Blank Page).
2 Operating Instructions Measure Temperature 2-1 Section 2 Operating Instructions 2.1 Measure Temperature Press the ON button. The unit will display “888.8” for 2 to 3 seconds, then display the temperature. If there is no probe in the probe jack, the unit will display “LO”.
Nuclear Associates 07-402 Operators Manual 2-2 2.6 Backlight the Display When used in dark locations, the display of t he Portable Digital Thermometer can be illuminated by pressing the LIGHT/OC button.
(Blank Page).
Fluke Biomedical 6045 Cochran Road Cleveland, Ohio 44139 440.498.2564 www .flukebiomedical.com/rms.
An important point after buying a device Fluke 07-402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fluke 07-402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fluke 07-402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fluke 07-402 you will learn all the available features of the product, as well as information on its operation. The information that you get Fluke 07-402 will certainly help you make a decision on the purchase.
If you already are a holder of Fluke 07-402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fluke 07-402.
However, one of the most important roles played by the user manual is to help in solving problems with Fluke 07-402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fluke 07-402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
