Instruction/ maintenance manual of the product TN310-7BW Five Star Ranges
Go to page of 11
I NSTALLATION I NSTRUCTIONS P ROFESSIONAL R ANGE M ODEL S 36” A LL G AS R ANGE WI TH O PEN B URNERS ** 36” N ATURAL G AS M ODELS *TN310-7BW *TN310-7W **T HESE MODELS ARE FIELD CONVERITBLE F OR LP/P ROPANE GAS .** 36” LP/P ROPANE G AS M ODELS *PN310-7BW *PN310-7W **T HESE MODELS ARE FIEL D CON VERTI BLE FOR N ATUR AL GAS .
Installation Instructions BEFORE YOU BEGIN CAUTION: Read these instructions completely and carefully. THESE RANGES SHOULD BE INSTALLED IN CONJUNCTION WITH A SUITABLE OVERHEAD VENT HOOD.
I NSTALLATION I NSTRUCTIONS Please read these instructions before attempting to install this range Inspection & Unpacking Check the range carton for visible damage . If there is damage or even creases in the carton, contact the carrier, request an inspection and file the appropriate freight claim.
STEP 1 REMOVE PACKAGING Before moving t he rang e indoor s: Remove out er c arton and pac king materi al from the shipping base. The range is now ready f or removal from the wooden base. STEP 2 Due to the wei ght of these ranges , use a doll y wit h soft wheels to move t his range.
.
STEP 6 ELECTRIC CONNECTION This range must be supp lied wit h 120 vol t, 60 Hz. and connected to an individual, properly gr ounded branch circuit protect ed by a 15 amp circuit breaker or time delay fuse.
STEP 7 CONNECTING THE RANGE TO GAS Because hard piping restr icts When usi ng te st pre ssu res gr eat er movement of the range , t he us e of an than ½ psig to p ressure test the gas A.
STEP 8 LEVEL THE RANGE 1. Remove shipping t ape from the leveling legs. 2. Carefull y slide t he range into position. Be caref ul not t o damage the fl oor or entangle power cor d and gas fl exible tubing. 3. To adjust leveling legs, turn counter - clockwise to raise t he range; clockwise to lower.
.
ST EP 11 ASSEMBLE SURFACE BURNER COMPONENTS • Remove sh ippin g scre w from each s urface burne r. • Remove each surface burner . • Place d rip pan in pos ition under each burn er. Loc ate “d imples”. • Re - install surfa ce burn ers. • Install burn er pans.
STEP 15 CHECKLIST FOR OPEN BURNER INSTALLATION MAKE SURE ALL CONTROLS ARE IN THE “OFF” POSITION. Gas supply is “on” Electric power is “on” Burner drip pans in position unde.
An important point after buying a device Five Star Ranges TN310-7BW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Five Star Ranges TN310-7BW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Five Star Ranges TN310-7BW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Five Star Ranges TN310-7BW you will learn all the available features of the product, as well as information on its operation. The information that you get Five Star Ranges TN310-7BW will certainly help you make a decision on the purchase.
If you already are a holder of Five Star Ranges TN310-7BW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Five Star Ranges TN310-7BW.
However, one of the most important roles played by the user manual is to help in solving problems with Five Star Ranges TN310-7BW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Five Star Ranges TN310-7BW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
