Instruction/ maintenance manual of the product P5748 Fisher-Price
Go to page of 16
www .fisher -price.com.au P5748 IMPOR T ANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE..
2 This package contains small parts in its unassembled state. Adult assembly is required. Prevent serious injur y or death from falls or sliding out: • Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly .
3 2 Front Legs 2 Back Legs Footrest Parts All Fasteners Shown Actual Size Tighten the screws with the enclosed Allen wrench. Back Base Seat Back with Shoulder and Waist Belts Seat Bottom with Crotch B.
4 T urn the seat bottom upside down on a flat surface. • Position a back leg so that it curves up and fit it into a large • socket in the seat bottom. Hint: If the leg does not seem to fit into the seat bottom socket, try the other back leg. Fit the other back leg into the large socket in the seat bottom.
5 Position a front leg so that it curves up and fit it into the small • socket in the seat bottom. Hint: If the leg does not seem to fit into the seat bottom, tr y the other front leg. Fit the other front leg into the small socket in the seat bottom.
6 Assembly Fit the back base onto the bottom of both back legs, as shown. • Insert two M6 x 28mm screws into • each back leg and tighten. Fit the sockets on the footrest onto the posts on the front of • the assembly . Slide the footrest up onto the posts.
7 Assembly 13 Seat Back Peg Holes At an angle, fit the pegs on each side of the seat back into the • holes in the sides of the seat bottom. Hint: Y ou may need to flex the bottom edge of the seat back to fit the seat back pegs into the holes in the seat bottom.
8 Assembly Fit the other seat bracket to the other side of the seat bottom, • as shown. Insert two M4 x 17 mm screws and tighten. • 17 M4 x 17mm Screws Seat Bracket Unbuckle the lower restraint. • 18 Lower Restraint Hint: The shoulder belts come assembled to the seat back in the lower position for a smaller child.
9 Fit the elastic loops on the seat pad down through the slots in • the footrest. 21 Elastic Loops Slots Assembly Fit the elastic loops on the seat pad bottom onto the pegs on • the footrest. 22 Pegs BACK VIEW Fit the upper pocket of the seat pad onto the seat back.
10 Securing Y our Child Place your child in the seat. Position the crotch belt between your • child’ s legs. Fasten both waist/shoulder belts to each side of the crotch belt. • Make sure you hear a • "click" on both sides. Check to be sure the restraint system is securely attached by • pulling it away from your child.
11 • T o tighten the waist belts: Feed the anchored end of the waist belt up through the buckle to form a loop A . Pull the free end of the waist belt B .
12 T o adjust the restraint height for baby , push to remove the • shoulder belts from the seat back. 5 Shoulder Belts Smaller Baby Insert the ends of the shoulder belts through the lower slots in the • pad and seat back.
13 Adjusting Seat Recline Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. Lift the seat back latch and push the seat back forward or , pull it • backwards to the desired position. Push the seat back to be sure it is latched in position.
14 4 T o remove the snack tray , pull the tabs on the sides of the snack • tray off the pegs. Slide the tray off of the armrests. • While pulling the release tabs on the sides of the food tray , • adjust the tray forward or backward. While pulling the release handles on the sides of the food tray , • lift to remove it.
15 Care The snack tray , seat and restraint straps may be wiped clean • using a mild cleaning solution and damp cloth. Do not use bleach. Do not use harsh or abrasive cleansers. Rinse clean with water to remove residue. The food tray is dishwasher safe.
Fisher -Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA P5748pr -0729 AUSTRALIA: Mattel Australia Pty. Ltd., 658 Chur ch Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
An important point after buying a device Fisher-Price P5748 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price P5748 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price P5748 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price P5748 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price P5748 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price P5748, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price P5748.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price P5748. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price P5748 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
