Instruction/ maintenance manual of the product M7332 Fisher-Price
Go to page of 8
www .fi sher -price.com M7332.
2 • Please keep this instruction sheet for future reference, as it contains important information. • Adult assembly is required. • Tools needed for assembly: Hammer, Phillips Screwdriver and Scrap Block of Wood (not included). • Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg).
3 Parts Note: Some parts shown are assembled to both sides of the trike. Handlebar Front Wheel 4 Pedal Hubs Pedal Axle 2 Pedals Fork 2 Fork Covers Frame Seat Seat Retainer Rear Wheel Straight Axle 2 H.
4 Assembly • Slide a hubcap (peg side up) onto the straight axle. • Slide a rear wheel (indented side down) onto the straight axle. Rear Wheel Indented Side Down • Place a scrap block of wood on a flat surface. • Turn the frame on its side with the exposed end of the straight axle up.
5 Assembly • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. Pedal Hub Pedal Hub Pedal Axle Tab Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel.
6 Assembly • Turn the frame upright. • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar over the fork post and push it down onto the frame.
7 • At an angle, insert the tabs on the seat into any of the top three sets of slots for the lower, middle or upper position. • Lower the seat so that the seat retainer inserts and snaps into the slots in the frame. • Pull up on the seat to be sure it is secure.
8 • Periodically, check the plastic parts and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean, use a mild soap and water solution and a clean cloth.
An important point after buying a device Fisher-Price M7332 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price M7332 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price M7332 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price M7332 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price M7332 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price M7332, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price M7332.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price M7332. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price M7332 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
