Instruction/ maintenance manual of the product PMA1000HCE Alphasonik
Go to page of 20
Owner's Manual ALPHASONIK R HIGH CURRENT PO WER AMPLIFIERS PMA600HCE / PMA640HCE / PMA1000HCE.
ALPHASONIK W AS FOUNDED IN 1976 WITH ONE MISSION, TO BRING ST A TE OF THE ART PERFORMANCE TO THE CAR AUDIO ENTHUSIAST . In those early years we pioneered such ground-breaking technolo- gies as amplier fan cooling and high voltage signal transfer which remain a benchmark in high-end audio.
Introduction.................................................................................3 Features and Specications.....................................................4-5 Controls & Funtions................................................
Thank you for purchasing this Alphasonik product. Alphasonik products are specically engineered and designed for the mobile audio environment. This manual contains important information about installation, set-up procedures and integrating your new Alphasonik product into your vehicle.
High Current Power Amplier 1 Ohm Mono (PMA 600HCE / 640HCE / 1000HCE) Hour Meter Cooling Fan Remote Control For Digital V oltmeter Beveled Clear Acrylic Protective Cover T iffany-Style Input and Ou.
MODEL: PMA600HCE PMA1000HCE PMA640HCE Power /4 Ohms 300 X 2 500 X 2 160 X 4 Power /2 Ohms 550 X 2 900 X 2 290 X 4 Power /1 Ohm (Stereo) 900 X 2 1500 X 2 480 X 2 Power /1 Ohm (Mono) 1800 X 1 3000 X 1 9.
DVM BASS LEVEL PMA600HCE / PMA640HCE / PMA1000HCE 6 C O N T R O L S & F U N C T I O N S.
50Hz 150Hz DVM BASS LEVEL CH 3 / 4 CH 1 / 2 PMA640HCE 7 C O N T R O L S & F U N C T I O N S.
1. Speaker T erminals: These nickel plated connectors can accept from 10 to 8 gauge wire. Be careful to observe proper polarity when connecting the cables. 2. T o avoid unwanted ignition noise caused by ground loops, it is essential that the amplier be grounded to a clean, bare, metal surface of the vehicle’s chas- sis.
This LCD indicates the range from 10 volts to 15 volts. The LCD shows "LO" for 10 voltsbelow and "HI" for 15.5 volts over. HOUR METER - The hour meter is designed to provide the user with actual toal running time for the unit. Each number represents one hour of operation.
Planning Y our System Before beginning the installation, consider the following: A. If you plan to expand your system by adding other components sometimes in the future, ensure that adequate is left, and cooling requirements are met.
MONO MODE STEREO MODE TRI MODE BRIDGED PMA600HCE / PMA1000HCE 11 W I R I N G D I A G R A M S.
2 CHANNEL MODE 3 CHANNEL MODE 4 CHANNEL MODE PMA640HCE 12 W I R I N G D I A G R A M S.
6 CHANNEL MODE PMA640HCE 13 W I R I N G D I A G R A M S.
T urning On The Amplier The amplier automatically turns on a few seconds after you turn vehicle’s igni- tion switch to ACC ON or turn on your auto sound system, depending upon how you wired the system. The POWER indicator on the top of the amplier illumi- nates when the amplier is on.
SYMP TO MS CHECK Is the Diagnostic LED illuminated? (YE S) No power to pow er wire No power to remote wire w ith receiver on Burnt or broken fuse Check Speake rs Leads Check Audio Leads AMP.
Investigate the layout of your vehicle thoroughly before drilling or cutting. T ake care when you work near the gas tank, gas lines, hydraulic lines, electri- cal components and electrical wiring. Do not use the equipment unmounted. Attach this system securely to prevent damage, particularly in the event of an accident or aggressive driving.
Alphasonik, Inc. warrants this product against all defects in material and work- manship for a period of one (1) year from the date of original purchase provided it was purchased from an Authorized Alphasonik, Inc.
7. This warranty is not transferable and protects the original purchaser provided they reside and made their purchase in the United States. International consumers may contact their local retailer or distributor for warranty information.
www .alphasonikinc.com Alphasonik Inc. 7050 V illage Drive Bldg G Buena Park CA 90621 TEL: (714)670-8950 F AX: (714)670-8959.
An important point after buying a device Alphasonik PMA1000HCE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alphasonik PMA1000HCE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alphasonik PMA1000HCE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alphasonik PMA1000HCE you will learn all the available features of the product, as well as information on its operation. The information that you get Alphasonik PMA1000HCE will certainly help you make a decision on the purchase.
If you already are a holder of Alphasonik PMA1000HCE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alphasonik PMA1000HCE.
However, one of the most important roles played by the user manual is to help in solving problems with Alphasonik PMA1000HCE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alphasonik PMA1000HCE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
