Instruction/ maintenance manual of the product DC*SUPER FRIENDS M6784 Fisher-Price
Go to page of 8
M6784 www .fi sher -price.com Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Parts Part Not Shown: Label Sheet #8 x 3" Screw – 1 #8 x 3 / 4 " Screw – 6 FASTENERS ACTUAL SIZE Cap Nut – 2 IMPORTANT! • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry cloth before assembly.
• Slide a hubcap (peg side up) onto the straight axle. • Slide a rear wheel (indented side down) onto the straight axle. • Turn the frame upside down. • Insert the straight axle through the holes in the rear of the frame. Rear Wheel (Indented Side Down) • Turn the frame on its side with the exposed end of the straight axle up.
• While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. Hole Pedal Axle Pedal Hubs Front Wheel • Fit the pedal on the pedal axle.
• Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame.
• At an angle, insert the tabs on the seat into any of the top three sets of slots for the lower, middle or upper position. • Lower the seat so that the seat retainer inserts and snaps into the slots in the frame. • Pull up on the seat to be sure it is secure.
Note: For best performance, we recommend replacing the batteries that came with this trike with three, new alkaline "AA" (LR6) batteries. Headlight Cover 1 • Loosen and remove the two screws from the headlight cover. Remove the headlight cover.
Seat Retainer Tab • Turn the frame on its side. • Squeeze the seat retainer tabs toward one another and lift the seat from the frame. Seat Retainer Tab Frame Seat • Slide the power switch on . • Turn the ignition, “VRROOOM!” • Press the left or right turn signals for flashing blinkers.
An important point after buying a device Fisher-Price DC*SUPER FRIENDS M6784 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price DC*SUPER FRIENDS M6784 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price DC*SUPER FRIENDS M6784 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price DC*SUPER FRIENDS M6784 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price DC*SUPER FRIENDS M6784 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price DC*SUPER FRIENDS M6784, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price DC*SUPER FRIENDS M6784.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price DC*SUPER FRIENDS M6784. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price DC*SUPER FRIENDS M6784 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
