Instruction/ maintenance manual of the product 73528 Fisher-Price
Go to page of 12
1 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Age: 1½ years - 5 years. Weight Limit: 50 lbs. (23 kg). Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (all not included).
2 W ARNING To avoid serious injury: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers.
3 Parts Seat Pin Seat Handlebar Handle Pin Frame Cover Handle T op Handle Bottom Base 2 Base/Handle Covers Fork Front Wheel Assembly 2 Fork Covers 4 Pedal Axle Covers Straight Axle 2 Rear Wheels Cap N.
4 Assembly • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry, cloth before assembling this product. This product contains small parts in its unassembled state.
5 Assembly • Fit the wheel cap into the center of the wheel. Tap the wheel cap with a hammer to secure it to the wheel. • Set the frame assembly aside. 4 Wheel Cap 3 • Turn the frame on its side with the exposed end of the straight axle up. • Place the assembled rear wheel on the scrap block of wood.
6 Assembly • Place the front wheel assembly between the fork arms so that the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • Insert two #10 x ¾ " screws into the fork cover and tighten.
7 • Insert the knobbed end of the foot- rest up through the opening in the underside, center of the frame . • Rotate the footrest ¼ turn . • Slide the footrest toward the handlebar as far as it will go until the top of the footrest is positioned over the opening’s rectangular cut-out.
8 Assembly • While pushing down on the seat, insert the seat pin through the hole in the seat and into a seat mount adjustment hole. 11 Seat Pin • Insert 13 - #8 x ¾ " screws into the handle top and tighten. 13 • Place the base/handle assembly on a flat surface so that the wheel retainers are upright.
9 Ride-on Rocker • Insert the base/handle pin through one wheel retainer, a hole in the front wheel and into the other wheel retainer. • Push the handle pin to “snap” it into place .
10 3 2 Base/Handle • Insert the handle pin through one side of the base/handle, through the holes in the back of the frame and out through the hole in the other side of the base/handle. Make sure the handle pin “snaps” into place. • Pull on the handle pin to be sure it is secure.
11 Pedal T rike 2 Base/Handle • Rotate the base/handle down, under the trike, to the ride-on rocker position. 1 Base/Handle • If you are converting from the learn to pedal trike mode, remove the handle pin from the base/handle and the back of the frame.
12 Storage Maintenance • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean this product, use a mild soap and water solution and a clean cloth.
An important point after buying a device Fisher-Price 73528 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher-Price 73528 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher-Price 73528 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher-Price 73528 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher-Price 73528 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher-Price 73528, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher-Price 73528.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher-Price 73528. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher-Price 73528 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
