Instruction/ maintenance manual of the product LNS-T32 Fisher
Go to page of 18
F ollowing chec ks and confir mations should be tak en f or saf ety . Check the f ollo wing things by the time of the cabinet assemb ly after the lens replacement. 1. Check the lens is securely fix ed. 2. Check the proper wiring and the wires are fix ed properly .
Fig-1 Fig-2 Fig-3 Fig-4 SCREW "A" Remov e 2 scre ws-A. Press the button (or remo v e 2 screws-B) on the low er of the lens cov er and remov e the lens cov er .
Fig-6 Fig-7 Fig-8 3 REMO VE THE LENS (See Figure-5 and 6) Remov e the connector "K16J" of the circuit board. Remov e the lens motor lead from lead holder . Remov e screws-C (4 scre ws) which f astens the lens and remov e the lens. Use the driv er (3 mm, Green) included with the lens to remov e the screws .
T urn the lens cov er to counter-clockwise and pull it tow ard front and remov e the Lens Cov er . Remov e 2 Scre ws-A. Remov e the front cabinet REMO VE THE LENS CO VER AND FRONT CABINET 1 1. 2. 2 REMO VE THE LIGHT -BLOCK SHEET BASE AND LIGHT -BLOCK SHEET (See Figure-2) P erf orm the steps to f or lens replacement.
4 MOUNT THE LENS (See Figure-5) Remov e protectiv e caps (front and back) on the lens. Mount the lens on lens mounting brac ket with Upper 2 screws . (locate motor on left side). Use the driver (4 mm, Y ellow) included with the lens to f asten the screws .
5 MOUNT THE LIGHT -BLOCK SHEET AND LIGHT -BLOCK SHEET BASE (See Figure-6) 6 MOUNT THE FRONT CABINET AND LENS CO VER (See Figure-6 and 7) Mount the light-bloc k sheet on the lens as shown in the Figure-6. (In the same position as the remov ed sheet has been placed).
- 7 - T ur n the lens cov er to counter-clockwise and pull it tow ard front and remov e the Lens Cov er . Remov e 2 Screws-A. Remov e the front cabinet REMO VE THE LENS CO VER AND FRONT CABINET 1 1. 2. 2 REMO VE THE LIGHT -BLOCK SHEET BASE AND LIGHT -BLOCK SHEET P erf or m the steps to f or lens replacement.
- 8 - LENS ATTACHMENT Part No. (610 275 6029) 4 MOUNT THE LENS Remov e protectiv e caps (front and back) on the optional lens. Mount the lens on the lens attachment with 4 Screws . Connect the lens motor lead connector to the sock et on the lens attachment.
- 9 - UP 5 MOUNT THE LIGHT -BLOCK SHEET AND LIGHT -BLOCK SHEET BASE 6 MOUNT THE FRONT CABINET AND LENS CO VER Mount the light-bloc k sheet on the lens. (In the same position as the remov ed sheet has been placed). Use the sheet included with the lens.
液晶プロジェクターレンズ 品番 LNS-T31A/W31A/T32 レンズ交換作業手順書 交換作業上の注意 レンズ交換はサ−ビス技術員が行ってください。 レンズ交換.
レンズ交換は スクリューA (2本）を外します。 レンズカバー下部のボタンを矢印の方向に押し、{モデルに よってはレンズカバー下部のスクリューB (.
3 レンズを外す。 （図 5、6 参照） 基板のコネクター "K16J" を外します。 レンズモーターのリードを上部ホルダーより外します。 レンズを固.
レンズ交換は レンズカバーを矢印の方向に回し手前に引っ張り、レンズカ バーを取り外します。 スクリューA (2本）を外します。 前面キャビネット.
4 レンズを取り付ける。 （図 5 参照） 交換レンズに付いているレンズ保護キャップ（前後2箇所） を外します レンズをレンズマウントブラケットへ.
UP 図6 図7 5 6 遮光プレート及び遮光プレートベースを取り付 ける。 （図 6 参照） 交換レンズに同梱されている遮光プレートをレンズに通し ます。 .
- 7 - レンズ交換は レンズカバーを矢印の方向に回し手前に引っ張り、レンズカ バーを取り外します。 スクリューA (2本）を外します。 前面キャビネットを取り外します。 レンズカバー及び前面キャビネットを外します。 1 1.
- 8 - レンズに付属の ドライバー レンズアタッチメント 品番 (610 275 6029) レンズロックレバー タブをつまん で下げ る。 4 レンズを取り付けます。 交換レンズを 1.
- 9 - UP 5 6 遮光プレート及び遮光プレートベースを取り付 けます。 交換レンズに同梱されている遮光プレートをレンズに通し ます。 遮光プレートに.
An important point after buying a device Fisher LNS-T32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher LNS-T32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher LNS-T32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher LNS-T32 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher LNS-T32 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher LNS-T32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher LNS-T32.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher LNS-T32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher LNS-T32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
