Instruction/ maintenance manual of the product SPS-50 Allstar Products Group
Go to page of 8
1 INST ALLA TION AND OWNER’S MANUAL MODEL SPS-50 GA TE OPERA T OR ST ANDBY POWER SUPPL Y READ T HIS MANUAL CAREFULLY BEFORE INSTA LLATION OR USE Serial #: Date Installed: Your Dealer: 107887.
2 Pre-Installation Notes ....... ................ ............... .............. .......... 3 Installing the SPS-50 ....... ................ ............... ................ .......... 4 LED Indicators ............ ....................................
3 The Allstar Standb y Power Suppl y is designed to provide back- up power to a gate operator w hen the main AC suppl y voltage is interrupted or disconnected. It el iminates the need for a separate motor and control ci rcuit to be m echanically attached to the gate operator.
4 The follow ing items are include d with the SPS -50: 1. 1- SPS-50 control box 2. 1 - SPS-50 battery pack 3. 1- Relay output wire harness 4. 2- AC po wer in or power out wire harn ess 5. 1- Warning label 6. 1- Instr uctio n Man ual INST A LLING THE SPS-50 The SPS-50 is not w eather proof and must be protected f rom expo sure.
5 Connecting the AC Lin e Voltage (Main Voltage) The SPS-50 is designed to provide back-up po wer to the gate operator ONLY. Aux iliary devices such as loop detectors, card readers, phone entry s ystems, et c., m ust NOT be co nnected to the output of the SPS-50.
6 Installing the Warning Labels The warning labels s hould be pl aced to notify service personnel that the gate operator is connected to a back -up power supply unit. Maintenance of Batteries Typical battery life should be two years, however this will vary depending on use and climate.
7 RISK OF ENTRAPMENT. THE SPS-50 IS DESIGNED TO PROVIDE POWE R TO A GATE OPER ATOR WHEN THE MAIN AC POWER I S TURNED OFF. A GATE OPERATOR CONNECTED TO THE SPS-50 MAY START UNEXPECTEDLY WHEN THE MAIN AC POWER IS TURNED OFF.
8 INPUT VOLTAGE: 105 - 125 VAC OUTPUT VOLTAGE: 115 VAC ± 10% SURGE PROTECTION: MOV, TRANZORB OUT PUT FREQU ENCY : 60 HZ BATTERY: 24 V DC, 7 AH OUTPUT CURRE NT: 5 AMPS RECH ARG E TIME : 8 HOURS SURGE .
An important point after buying a device Allstar Products Group SPS-50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allstar Products Group SPS-50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allstar Products Group SPS-50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allstar Products Group SPS-50 you will learn all the available features of the product, as well as information on its operation. The information that you get Allstar Products Group SPS-50 will certainly help you make a decision on the purchase.
If you already are a holder of Allstar Products Group SPS-50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allstar Products Group SPS-50.
However, one of the most important roles played by the user manual is to help in solving problems with Allstar Products Group SPS-50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allstar Products Group SPS-50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
