Instruction/ maintenance manual of the product CM3000 Firstech, LLC.
Go to page of 8
Firstech, LLC. Technical Data (CM3000) 1 CM3000 Guide to Installation: The following contains descriptions for each wire in detail. Please reference the installation manual/wiring diagram for wire location.
Firstech, LLC. Technical Data (CM3000) 2 Connector #1: Pin #1: Red - This wire is used as the (+) constant power input for the unit. This wire must be connected for the unit to function correctly. Pin #2: Green/White - This wire is the (+) positive parking light output.
Firstech, LLC. Technical Data (CM3000) 3 Connector #2: Pin #1: Green/White - This is the low voltage ( - ) parking light output 200mA . Some newer vehicles require a (- ) parking light output instead of the standard (+) output (reference connector #1) such as the new Jeeps and even some Fords.
Firstech, LLC. Technical Data (CM3000) 4 Connector #3: Pin #1: Light Blue - This needs to be connected to the parking brake . This wire requires a ( - ) input to activate. This wire serves two functions: 1. To engag e Reservation Mode for manual transmissions, reference the users or install guide.
Firstech, LLC. Technical Data (CM3000) 5 Tachometer Sensing 1. You will need an Auto Ranging Digital Meter to test for the correct tach. 2. Most tach wires are located at the ( -) side of the ignition coil. In some cases you may have to go to the ECU or Coil pack.
Firstech, LLC. Technical Data (CM3000) 6 Connector #4: Pin #1: No Connection Pin #2: Violet/White - this wire is the ( - ) 200mA trunk release . The following sequence takes place each time the trunk release output is triggered: 1. CompuStar disarms alarm and unlo cks doors 2.
Firstech, LLC. Technical Data (CM3000) 7 Pin #6: Yellow - This wire is the ( - ) 200mA Auxiliary #1 output . It can be programmed for a timed pulse or latch. Please note: Timed pulse durations can only be programmed with the CompuProgrammer. Pin #7: Yellow/White - This wire is the ( - ) 200mA Auxiliary #2 output .
Firstech, LLC. Technical Data (CM3000) 8 Tach Learning Switch: This is the small black button on the side of the brain used to program tach. Once you have found the correct wire simply press this button while the vehicle is r unning and the siren will chirp once to confirm that the tach is learned.
An important point after buying a device Firstech, LLC. CM3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Firstech, LLC. CM3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Firstech, LLC. CM3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Firstech, LLC. CM3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Firstech, LLC. CM3000 will certainly help you make a decision on the purchase.
If you already are a holder of Firstech, LLC. CM3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Firstech, LLC. CM3000.
However, one of the most important roles played by the user manual is to help in solving problems with Firstech, LLC. CM3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Firstech, LLC. CM3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
