Instruction/ maintenance manual of the product PS1010-3A First Virtual Communications
Go to page of 10
IBBI Electronics 1 PS1010-3A Multifunctional Digital DC power supply USER MANUAL • Voltage controllability • Current controllability • Digital voltmeter function • High power efficiency • Br.
IBBI Electronics 2 Table of Contents 1 Safety precautions ...................................................3 2 Device overview .....................................................3 3 Getting started .................................................
IBBI Electronics 3 1 Safety precautions • Do not operate under Lightning conditions • Do not keep in wet areas • Always adjust required voltage/current, before connecting the power lines to the DUT 2 Device overview PS1010 is a PWM controlled highly power efficient digital power supply.
IBBI Electronics 4 1 1 1 0 9 8 1 7 2 3 4 5 6 1. Power switch 2. Display-value 3. Display-unit/information 4. LED panel 5. Output voltage controller 6. Current limit controller 7. C-limit display selection 8. Voltage-Current display selection 9. Voltage out put terminal 10.
IBBI Electronics 5 Voltmeter range 0-35V 5 Device operation 5.1 Setting output voltage • Put VM/Vout switch [(10)] to Vout position • Put C/V switch [(8)] to V position • Volt LED indicator wi ll light up [(4)] • [(3)] will display “U” for Volt • Adjust the voltage controller [ (5)] to get the required value.
IBBI Electronics 6 • Put VM/Vout switch [(10)] to Vout position • Put C/V switch [(8)] to C position • Amp LED indicator will light up [(4)] • [(3)] will display “A” for Ampere • Actual current value will be displayed on [(2)] with two decimal places 5.
IBBI Electronics 7 5.4.2 Measuring voltages at external sources • Put VM/Vout switch [(10)] to VM position. VM LED indicator [(4)] will light up • Connect wires as shown below(VM terminal and the GND of Vout terminals) • Value will be displayed [(2)].
IBBI Electronics 8 • Switch ON the PS1010-3A [(1)] • [(3)] will show “F” to indicate Firm ware version • Display [(2)] will show the Firmware version in the following order.
IBBI Electronics 9 PS1010 is in its current mode and the Amp indicator is also ON. But rotating current controller knob does not affect the display value. • You are at the current mode and at this mode the display shows only the actual current draw by the DUT.
IBBI Electronics 10 Contact details: IBBI Electronics, No185/B, Opatha, Kotugoda. Sri Lanka. Email: ibbi.electronics@gmail.com Tel/Fax: +94 11 229 6812 Web: http://ibbi.
An important point after buying a device First Virtual Communications PS1010-3A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought First Virtual Communications PS1010-3A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data First Virtual Communications PS1010-3A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, First Virtual Communications PS1010-3A you will learn all the available features of the product, as well as information on its operation. The information that you get First Virtual Communications PS1010-3A will certainly help you make a decision on the purchase.
If you already are a holder of First Virtual Communications PS1010-3A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime First Virtual Communications PS1010-3A.
However, one of the most important roles played by the user manual is to help in solving problems with First Virtual Communications PS1010-3A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device First Virtual Communications PS1010-3A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
