Instruction/ maintenance manual of the product POE120 Series Alloy
Go to page of 9
POE120 Series 10/100 Base-TX to 100Base-FX Converter POE Powered Device Version 1.01 Date: 13 July 2005.
1. Overview The POE120 Series IEEE 802.3u compliant media converters support two types of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault Propagation) support it allows the adminis trator to easily diagnose link faults on their network.
4. Installing the Converter 4.1 POE120 converter connected to a Power Sourcing Equipment Device (PSE) 1. Connect the copper cable to your IEEE 802.3af compliant PSE device. The POE120 can also work as a standard media converter and connect to a non POE device.
Fig. 2 Example connection between PO E1 20, PSE device and Fibre Cable Fig. 3 POE120 Series to PSE Device or POE Injector PO E1 20 Series 10/ 100 Bas e- TX to 100Bas e- F X Fig.
Fig. 6 Pairs used for receivin g power over Ethernet Cable. Note: The pins used for receiving power from a PSE Device follows the IEEE 802.3af standard.
6. Link Failure Propagation The POE120 Series media converters su pport Link Failure Propagation (LFP). If the Copper port is unplugged, the conv erter stops transmission on the fibre port. This causes the remote fibre node link to fail as well. The LED’s on the converter will now show link failure on both the copper and fibr e ports.
7. LED Description The following table describes the LED’s located on the POE100 Series media converter. LED Colour Function FX LNK/ACT Green Lit when fibre connection has link Blinks when fibre dat.
9. DIP Switch Configuration Fig. 11 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Confi guration and Settings Reset : If S1-1, S1-2, S1-3, S1-4 or S1- status is changed, please press this button for your settings to take effect.
11. Technical Specifications Standards: IEEE 802.3u 10/100Base-TX, 100Base-FX IEEE 802.3af Power Over Ethernet UTP Cable: Cat. 5 cable up to 100m Fibre Cable: 50/125, 62.
An important point after buying a device Alloy POE120 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alloy POE120 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alloy POE120 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alloy POE120 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Alloy POE120 Series will certainly help you make a decision on the purchase.
If you already are a holder of Alloy POE120 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alloy POE120 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Alloy POE120 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alloy POE120 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
