Instruction/ maintenance manual of the product AD Firex
Go to page of 8
SMOKE ALARM FEA TURES • This smoke alarm is powered by 120V AC (0.05 Amps, 60Hz) and a 9-volt battery back-up source. AC/DC smoke alarms of fer added protection in the event of a power failur e or a drained battery . • Unique power connector prevents inter connection with incompatible smoke alarms or security systems.
smoke alarm MA Y be used inside individual rooms as SUPPLEMENT AL protection. • Smoke alarms must not be used with detector guards unless the combination of alarm and guard has been evaluated and found suitable for that purpose. • Install a smoke alarm in every room and on every level of the home.
hold as follows: A smoke detector installed in each separate sleeping area (in the vicinity , but outside the bedrooms), and heat or smoke detectors in the living rooms, dining r ooms, bedrooms, kitchens, hallways, attics, furnace rooms, closets, utility and stor- age rooms, basements and attached garages.
• Install smoke alarms on peaked, cathedral, or gabled ceilings 3 feet from the highest point (measured horizontally). NFP A 72, Section 5-2.7.4.1 states: “A row of detec- tors shall first be spaced at or within 3 feet (0.9 m) of the peak of the ceiling, measured horizontally .
10. Position smoke alarm to mounting plate and turn clockwise to lock into place. For tamper -r esist, use long-nosed pliers to remove thin plastic from notch on smoke alarm edge. Insert pin into notch on edge of smoke alarm after smoke alarm is positioned properly in base.
3. If smoke alarm does not sound, tur n off power at main fuse box or circuit br eaker and check wiring. Retest smoke alarm. REPLACE OR RETURN THE ALARM IF THE PUSH-TO-TEST FUNCTION DOES NOT OPERA TE PROPERL Y AFTER FOLLOWING THE PROCEDURES OUTLINED ABOVE (see REP AIR below).
TROUBLESHOOTING DANGER: Always turn off power at main fuse box or circuit br eaker before taking tr ouble- shoot- ing action. WARNING: DO NOT disconnect battery or AC power to quiet an unwanted alarm. This will remove your pr otection. Fan the air or open a window to remove smoke or dust.
8 W ARRANTY INFORMA TION 5-YEAR LIMITED SMOKE ALARM W ARRANTY AND 10-YEAR LIMITED ULTRALIFE U9VL-J LITHIUM BA TTERY W ARRANTY (WHEN SOLD WITH INVENSYS CONTROL AMERICAS SMOKE ALARM) Invensys Controls A.
An important point after buying a device Firex AD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Firex AD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Firex AD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Firex AD you will learn all the available features of the product, as well as information on its operation. The information that you get Firex AD will certainly help you make a decision on the purchase.
If you already are a holder of Firex AD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Firex AD.
However, one of the most important roles played by the user manual is to help in solving problems with Firex AD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Firex AD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
