Instruction/ maintenance manual of the product POE100 Series Alloy Computer Products
Go to page of 9
POE100 Series 10/100 Base-TX to 100Base-FX Converter POE Power Provider Version 1.01 Date: 13 July 2005.
1. Overview The POE Series IEEE 802.3u compliant media converters support two types of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault Propagation) support it allows the adminis trator to easily diagnose link faults on their network.
3. Checklist Before you start installing the POE converter, please verify that the package contains the following items. - The POE100 Series - AC Power Cord - CD containing this manual Please notify your sales representativ e if any of the above items are missing or damaged.
Fig. 1 View of the POE 100 Series Media Converter Fig. 2 Example connection between POE100, PD device and Fibre Cable Fig. 3 POE100 Series to PD Device or POE Splitter (VOIP Phone) RX TX TX RX VOIP Po.
10/ 100B ase-T X t o 100 Base- F X Con verter PO E1 00 S eri es PO E Po we r Provid e r Fig. 4 POE100 Series Medi a Converter Front Panel Fig. 5 POE100 Series Media Converter Rear Panel Fig. 6 Pairs used for transmitti ng power over Ethernet Cable. Note: The pins used for delivering power to the Powered Device follow the IEEE 802.
5. WDM Single Fibre Model The POE100 Series media converter has an optional Wavelength Division Multiplexing (WDM) Model that can trans port bi-directional full duplex signals over a single fibre simultaneously.
Note : ● indicates LNK/ACT LED Lit ○ indicates LNK/ACT LED Off ● ○ ○ ○ ○ ○ ● C B 10/100 Switch 10/100 Switch Fibre Cable A TP TP LFP LFP Fibre Cable B A ○ ○ ○ ○ ● C ○ ○ TP TP 10/100 Switch Remote Station 10/100 Switch LFP LFP Fig.
7. LED Description The following table describes the LED’s located on the POE100 Series media converter. LED Colour Function FX LNK/ACT Green Lit when fibre connection has link Blinks when fibre dat.
Note: 1. S1-2 and S1-3 will take effect onl y when S1-1 is set to TP-Force 2. S1-5 must be set to 100F DX for Single Fibre Model 3. S1-6 must be set to POE when you need to supply power to a PD. Warning: - When the copper port is set to AUTO and is connected to a device that is forced to 100Mbps FDX, an unknown state may result.
An important point after buying a device Alloy Computer Products POE100 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alloy Computer Products POE100 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alloy Computer Products POE100 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alloy Computer Products POE100 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Alloy Computer Products POE100 Series will certainly help you make a decision on the purchase.
If you already are a holder of Alloy Computer Products POE100 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alloy Computer Products POE100 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Alloy Computer Products POE100 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alloy Computer Products POE100 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
