Instruction/ maintenance manual of the product 26F7030 Finlux
Go to page of 41
26in LED Passive 3D TV 26F7030 Owner’ s manual happy Finnish.
English - 1 - Contents Features ................................................................. 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions .
English - 2 - Features 3D Viewing: This product supports the 3D viewing • function via an available broadcast or via HDMI, PC, YPBPR source. Remote controlcolour LED TV . • Fully integrated T errestrial digital-cable TV (DVB-T C- • MPEG2) (DVB-T -C MPEG4).
English - 3 - Moisture and W ater Do not use this device in a humid and damp place “(avoid using in the bathroom, near the sink in the kitchen etc.)”. Do not expose this device to rain or water , as this may be dangerous and do not place objects fi lLED with liquids, such as fl ower vases, on top.
English - 4 - material on the cloth, make sure to shake off any dust before using it. Do not scratch the surface of the Liquid crystal • shutters with a sharp tool and do not clean it using chemicals. This may degrade the screen quality . Do not apply force to the liquid crystal.
English - 5 - Y ou can reduce the risk of photosensitization seizure • by taking the following actions: While watching the 3D TV , do take frequent breaks. • If you have vision that is different in each eye, you should watch the TV after taking vision correction measures.
English - 6 - Package Contents 1 2 3 4 5 6 7 8 9 0 SCREEN LANG SUBTITLE REPEAT TITLE ZOOM ROOT TEXT SWAP OK P/CH MENU SOURCE RETURN SEARCH EPG INFO SLEEP DISPLAY PRESETS MODE Remote Control LED TV Bat.
English - 7 - Remote Control Buttons 1 2 3 4 5 6 7 8 9 0 SCREEN LANG SUBTITLE REPEA T TITLE ZOOM ROOT TEXT SW AP OK P/CH MENU SOURCE RETURN SEARCH EPG INFO SLEEP DISPLA Y PRESETS MODE Standby 1. Pause / T imeshift recording 2. Stop (in Media Browser mode) 3.
English - 8 - TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons Up direction 1. Down direction 2. Programme/V olume / A V / 3. Standby-On selection switch Note: Y ou can move the switch, upward or downward to change the volume.
English - 9 - Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. VGA Input 5. is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
English - 10 - Using USB Media USB Connection Y ou can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV . This feature allows you to play fi les stored in a USB drive or record programmes. 2.5” and 3.
English - 1 1 - Multipartiton support is available. Maximum two • different partitions are supported. If the disk have more than two partitions, crash may occur . First partition of the usb disk is used for PVR ready features. It also must be formatted as primary partition to be used for PVR ready features.
English - 12 - Note : These three methods of connection perform the same function but in different levels of quality . It is not necessary to connect by all three methods.
English - 13 - Viewing Electronic Programme Guide (EPG) Y ou can view the electronic programme guide (EPG) to see information about available programmes.T o view the EPG menu please press EPG button on the remote control. Press “ • ”/“ ” buttons to navigate through channels.
English - 14 - Red button (Prev Time Slice): Displays the programmes of previous time slice. Green button (Next Time Slice): Displays the programmes of the next time slice. Y ellow button (Prev Day): Displays the programmes of previous day . Blue button (Next day): Displays the programmes of the next day .
English - 15 - Select Channel In EPG menu, using this option, you can switch to the selected channel. Record / Delete Record Timer IMPORT ANT : T o record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature.
English - 16 - Y ou can select frequency ranges from this screen. For highlighting lines you see, use “ ” or “ ” button. Y ou can enter the frequency range manually by using the numeric buttons on the remote control. Set Start and Stop Frequency as desired by using numeric buttons on the remote control.
English - 17 - Manual Search In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital , you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.
English - 18 - Operating the Channel List Press “ • ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu. Use • CH or CH buttons to move page up or down. Press • BLUE button to view fi ltering options.
English - 19 - Managing Stations: Sorting the Channel List Y ou can select broadcasts to be listed in the channel list. T o display speci fi c types of broadcast, you should use the Active channel list setting. Select Active channel list from the Channel list menu by using “ ” or “ ” button.
English - 20 - RED : Sorts fi les by name. Play ( button) : Plays all media fi les starting with the selected one. Y ellow Button: Change viewing style Loop/Shuf fl e (GREEN button) : Press once to disable Loop. Press again to disable both Loop and Shuf fl e.
English - 21 - to enable all. Y ou can follow the disabLED functions with the change of the icons. Note: If you start the playback with the button and activate the symbol, the TV will play the next music/video fi le.
English - 22 - Using the 3D Mode IMPORT ANT! Read and understand the 3D mode safety precautions carefully for your safety before using the 3D function. Read and understand “3D Mode and 3D Images” precautions section on page 42. Y ou must use 3D glasses parallel to your TV .
English - 23 - Supported 3D Content Resolutions See Appendix F for supported 3D Content resolutions. Timeshift Recording IMPORT ANT : T o record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature.
English - 24 - Available playback options: Play from start: Plays the recording from the • beginning. Resume: Recommences the recordings. • Play from offset: Speci fi es a playing point. • Note: Viewing main menu and menu items will not be available during the playback.
English - 25 - Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Con fi guring Picture Settings Y ou can use different picture settings in detail. Press MENU button and select the Picture icon by using “ ” or “ ” button.
English - 26 - Autoposition : Automatically optimizes the display . Press OK to optimize. H Position : This item shifts the image horizontally to right hand side or left hand side of the screen. V Position : This item shifts the image vertically towards the top or bottom of the screen.
English - 27 - Operating Settings Menu Items Press “ • ” or “ ” button to highlight a menu item. Press • OK button to select an item. Press • MENU button to exit. Settings Menu Items Conditional Access : Controls conditional access modules when available.
English - 28 - Language Settings In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set.
English - 29 - Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen. Adding a Timer Press • YELLOW button on the remote control to add a timer . The following menu appears on the screen: Channel : Changes network type by using “ ” or “ ”.
English - 30 - Hard Disk Info T o view the details about the USB disk, highlight Hard Disk Info by using “ ” or “ ” key and press OK . USB disk information will be displayed: Con fi guring Date/Time Settings Select Date/Time in the Settings menu to con fi gure Date/T ime settings.
English - 31 - Y ou can manually search for new software by selecting Scan for upgrade . Application version: Displays the current application version. Hard of Hearing : If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.
English - 32 - T eletext The teletext system transmits information such as news, sports and weather on your TV . Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted.
English - 33 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 34 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information.
English - 35 - Appendix E: Supported 3D Content Resolutions HDMI MBV MBP DTV A TV OTHER 1080p@24 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 720p@50 FP Supported.
English - 36 - 3D Viewing Information Y our 3D V iewing experience can be affected by the location of the viewer and the TV set. T o maximise your enjoyment we recommend you follow the guidelines belo.
English - 37 - Appendix F : Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Movie .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 MAX 1920x1080 @ 30P 20Mbit/sec .dat MPEG1, 2 MPEG2 .vob MPEG2 .
English - 38 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICA T OR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERA TING VOL T AGE 220-240V AC, 50 Hz.
English - 39 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply .
5 0 2 2 0 2 1 8 www .finluxdirect.com Customer helpline: 0845 459 5282.
An important point after buying a device Finlux 26F7030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Finlux 26F7030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Finlux 26F7030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Finlux 26F7030 you will learn all the available features of the product, as well as information on its operation. The information that you get Finlux 26F7030 will certainly help you make a decision on the purchase.
If you already are a holder of Finlux 26F7030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Finlux 26F7030.
However, one of the most important roles played by the user manual is to help in solving problems with Finlux 26F7030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Finlux 26F7030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
