Instruction/ maintenance manual of the product FTLX8561E2 Finisar
Go to page of 10
© Finisar Corporation – October 2008 Rev B Page 1 Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode XENPAK Transponder FTLX8561E2 PRODUCT FEATURES Hot pluggable XENPAK form factor Total power consumption: 2.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 2 I. Pin Descriptions Signal Name Level I/O Pin No. Description Management and Monitori ng Por ts MDIO Open Drain I/O 17 Management Data I/O. Re quires external 10 - 22 k Ω pull-up to th e APS on host.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 3 Receive Functions Reserved Reserved O O 38 39 Reserved For Future Use Reserved For Future Use RX.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 4 Electrical Pad Layout Fig 1-XENPAK Transponder Electrical Pad Layout II.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 5 III. Electrical Characteristics Recommended Operating Conditions Values Parameter Symbol min. typ. max. Unit Operating Case Temperature 1) T C 0 70 °C Transponder Total Power Consum ption P 2.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 6 Electrical AC Characteristics ( V CC5 = 4.75 V to 5.25 V, V CC3 = 3.14 V to 3.47 V, V CC aps = 1.152 V to 1.248 V, T C = 0°C to 70° C) Values Parameter Symbol min.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 7 IV. Optical Characteristics ( V CC5 = 4.75 V to 5.25 V, V CC3 = 3.14 V to 3.47 V, V CC aps = 1.152 V to 1.248 V, T C = 0°C to 70°C, BER 1E-12, Bit Rate 10.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 8 Environmental Performance Operating case temperature: 0°C to +70°C Operating humidity: 0% -95% RH non-condensing Fibers and Connectors The transponder has SC receptacles for both Tx and Rx.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 9 Eye Safety Finisar FTLX8561E2 transponders are Class 1 La ser Products.
FTLX8561E2 Product Sp ecification – October 2008 © Finisar Corporation – October 2008 Rev B Page 10 Package Outline Figure 2 - XENPAK Mechanical Dimensions IX.
An important point after buying a device Finisar FTLX8561E2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Finisar FTLX8561E2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Finisar FTLX8561E2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Finisar FTLX8561E2 you will learn all the available features of the product, as well as information on its operation. The information that you get Finisar FTLX8561E2 will certainly help you make a decision on the purchase.
If you already are a holder of Finisar FTLX8561E2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Finisar FTLX8561E2.
However, one of the most important roles played by the user manual is to help in solving problems with Finisar FTLX8561E2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Finisar FTLX8561E2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
