Instruction/ maintenance manual of the product FDVS Field Controls
Go to page of 4
FIELD DIRECT VENT SYSTEM Model: FDVS The Field Direct Vent System (FDVS) is a non-powered positive pressure side wall vent termination system for use only with specifically listed oil fired appliances. The system provides an outlet for exhaust gases and an intake for combustion air in a single concentric terminal.
Page 2 INSTALLATION OF FDVS DIRECT VENT SYSTEM I NSTALLATION O F T HE V ENT T ERMINATION 1. Remove vent system components from box and inspect for damage. If the carton has been crushed or mutilated, check components very carefully for damage. DO NOT install if any damage is apparent.
Page 3 I NSTALLATION O F T HE V ENT T ERMINATION C OMBUSTION A IR T EE 1. Assemble the combustion air tee assembly body to the vent termination outer pipe, and rotate to the desired position. Attach the tee assembly body to the vent termination outer pipe with at least 3 sheet metal screws evenly spaced apart (not included).
Page 4 Figure 4 Figure 5 FIELD CONTROLS DIRECT VENT SYSTEMS VENT PIPE ASSEMBL Y APPLIANCE ADAPTER INSTALLATION: 1. Apply a bead of sealant to appliance collar approx. 1” from end of collar (Figure 5). 2. Remove all oil and grease from the inside of the appliance adapter, and apply a bead of sealant to inside of adapter ½” from end (Figure 5).
An important point after buying a device Field Controls FDVS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Field Controls FDVS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Field Controls FDVS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Field Controls FDVS you will learn all the available features of the product, as well as information on its operation. The information that you get Field Controls FDVS will certainly help you make a decision on the purchase.
If you already are a holder of Field Controls FDVS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Field Controls FDVS.
However, one of the most important roles played by the user manual is to help in solving problems with Field Controls FDVS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Field Controls FDVS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
