Instruction/ maintenance manual of the product SB251-10 Allied Telesis
Go to page of 14
Simply connecting the world Patch Release Note Patch SB251-10 For SwitchBlade 4000 Series Switches and A T -9800 Series Switches Intr oduction This patch rel ease note lists the issues addres sed and enhancements made in patch SB251-10 for So ftware Release 2.
2 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J Some of the issues addresse d in this Re lease Note include a level number .
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 3 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J Featur es in SB251-09 Patch file details are listed in T able 2: Patch SB251-09 includes all issues reso lved and enhancements r eleased in previous patch es for Software Release 2.
4 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J Featur es in SB251-08 Patch file details are listed in T able 3: Patch SB251-08 includes all issues reso lved and enhancements r eleased in previous patch es for Software Release 2.
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 5 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J Featur es in SB251-07 Patch file details are listed in T able 4: Patch SB251-07 includes all issues reso lved and enhancements r eleased in previous patch es for Software Release 2.
6 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J • The POR T parameter of the SET STP POR T command specifies either all the ports in a trunk gr oup, or none of the ports in a tr unk gr oup. • The STPFOR W ARD parameter has been added to the ENABLE SWITCH and DISABLE SWITCH commands.
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 7 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J Patch SB251-05 includes all issues reso lved and enhancements r eleased in previous patch es for Software Release 2.
8 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J After autonegotiat ion had finished between two ports, the port on the SwitchBlade would not show link up status when the SHOW SWITCH POR T command was e xecuted.
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 9 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J Support has been added, to the MIB-2 interface MIB, for the port interface. This means that port counters can now be shown.
10 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J If a BIST was run at low temperatur es, for example 5 or 10 degre ss celcius, on a G8 car d, then a watchdog timer r estart could occur . The switch now checks for the real course of the extern al interrupts that occur when running BIST .
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 11 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J The DPOR T parameter in the ADD SWITCH HWFIL TER command was omitted when the configuration was generated.
12 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J Featur es in SB251-01 Patch file details are listed in T able 10: Layer 2 filtering i s now working corr ectly .
Patch SB251-10 For S witchBl ade 4000 Series Switches and A T -9800 Series Switches 13 Patch SB251-10 for Softwar e Release 2.5.1 C613-10361 -00 REV J When OSPF was enabled on startup, an OSPF interface would sometimes stay in the DOWN state. This issue has been r esolved.
14 Patch Release Note Patch SB251-10 for Software Release 2. 5.1 C613-10361 -00 REV J.
An important point after buying a device Allied Telesis SB251-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis SB251-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis SB251-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis SB251-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis SB251-10 will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis SB251-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis SB251-10.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis SB251-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis SB251-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
