Instruction/ maintenance manual of the product Rapier Switch Allied Telesis
Go to page of 11
RAPIER SWITCH QUICK INSTALL GUIDE.
Rapier Switch Quic k Install Guide Document Number C613-04017-01 REV D. Copyright © 1999-2002 Allied T elesyn International, Co rp. 19800 North Creek Parkway , Suite 200, Bothell, W A 9801 1, USA. All rights reserved. No part of this public ation may be repr oduced without prior written permission from Allied T elesyn.
Quick Instal l Guide 3 Software Release 2.3 .1 C613-04017 -01 REV D Models Cover ed By This Guide This Quick Install Guide includes information on the following mod els: ■ Rapier G6 ■ Rapier G6F-L.
4 Rapier Switch Software Release 2.3.1 C613-04017- 01 REV D Package Contents The following items are included with each Rapier Switch. Contact your sales repr esentative if any items are damaged or missing. ■ One Rapier Switch. ■ One AC power cord (AC models only).
Quick Instal l Guide 5 Software Release 2.3 .1 C613-04017 -01 REV D Installing the Switch All AC and DC versi ons of this equi pment must be eart hed. Follow these steps to install the switch: 1. Before in stalling the switch, r ead the safety information For safety information, see the Safety and Statutory Information booklet .
6 Rapier Switch Software Release 2.3.1 C613-04017- 01 REV D Figure 1: Rapier front panel and r ear panel with AC power inlet. 8. Apply DC power to the s witch (for DC models) Read the Safety and Statutory Information booklet befor e connecting a DC power supply .
Quick Instal l Guide 7 Software Release 2.3 .1 C613-04017 -01 REV D d) At the switch, connect the positive feed to th e + (positive) terminal and the negative feed to the - (negative) terminal. T ighten the t erminals to between 0.6 and 0.8 N m (0.041 to 0.
8 Rapier Switch Software Release 2.3.1 C613-04017- 01 REV D 2. Set the communication parameters Set the communication parameters on yo ur terminal or terminal emulation program to: • Baud rate: 9600 • Data bits: 8 •P a r i t y : N o n e •S t o p b i t s : 1 • Flow contr ol: Hardware 3.
Quick Instal l Guide 9 Software Release 2.3 .1 C613-04017 -01 REV D Using the GUI to configure a switch The GUI can be accessed through the switch’s default VLAN (VLA N1). T o set-up the GUI the first time it is used, you must first access the CLI. 1.
10 Rapier Switch Software Release 2.3.1 C613-04017- 01 REV D System LEDs and What They Mean System LEDs on its fr ont panel indicate the switch’s operational status. 1. DC models of the Rapier Sw itch do not have an RPS connector and the RPS LED will not function.
Quick Instal l Guide 11 Software Release 2.3 .1 C613-04017 -01 REV D Documentation and T ools CD-ROM The Documentation and T ools CD-ROM bundled with each Rapier Switch contains the complete Documentation Set for Rapier Switches and their expansion options, as well as tools for managing the switch.
An important point after buying a device Allied Telesis Rapier Switch (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis Rapier Switch yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis Rapier Switch - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis Rapier Switch you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis Rapier Switch will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis Rapier Switch, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis Rapier Switch.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis Rapier Switch. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis Rapier Switch along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
