Instruction/ maintenance manual of the product Rapier Series Allied Telesis
Go to page of 8
Simply connecting the world Patch Release Note Patch 86253-03 For Rapier Series Switches Intr oduction This patch rel ease note lists the issues addres sed and enhancements made in patch 86253-03 for Software Release 2.5.3 on existing models of Rapier series switches.
2 Patch Release Note Patch 86253-03 for Software R elease 2.5.3 C613-10382- 00 REV B Some of the issues addresse d in this Re lease Note include a level number .
Patch 86253-03 For Rapier Series Swit ches 3 Patch 86253-03 for Software R elease 2.5.3 C613-10382 -00 REV B The IP route filter d id not always wo rk correctly for OSPF . This issue has been resolved. Executing the DISABLE SWITCH PORT command on a port that was the source of a mirr or port did not disable the mirr or port.
4 Patch Release Note Patch 86253-03 for Software R elease 2.5.3 C613-10382- 00 REV B The maximum number of firewall sess ions had decr eased since software release 86s-241. This issue has been r e solved. Previously , an incorrect sour ce address was used for router advertis ements that were sent over an IPv6 tunnel.
Patch 86253-03 For Rapier Series Swit ches 5 Patch 86253-03 for Software R elease 2.5.3 C613-10382 -00 REV B The ENABLE RSVP INTERF ACE command did not succeed if IP was enabled after the RSVP interface ha d been created. Now , ENABLE RSVP INTERF ACE will succeed regar dless of when IP is enabled as long as an IP interface exists.
6 SHOW IP IGMP Patch Release Note Patch 86253-03 for Software R elease 2.5.3 C613-10382- 00 REV B Modified Command SHOW IP IGMP Syntax SHOW IP IGMP [COUNTER] [INTERFACE= interface ] Description This command displays information about IGMP , and multicast gr oup membership for each IP interface.
Patch 86253-03 For Rapier Series Sw itches DISABLE IP IGMP ALLG ROUP 7 Patch 86253-03 for Software R elease 2.5.3 C613-10382 -00 REV B New Commands This enhancement r equest introduces two new commands fr om enabling/ disabling all- group e ntries on switch ports.
8 DISABLE IP IGMP ALLGROUP Patch Release Note Patch 86253-03 for Software R elease 2.5.3 C613-10382- 00 REV B A vailability Patches can be downloaded fr om the So ftware Updates ar ea of the Allied T elesyn web site at www .alliedtelesyn.co.nz/su pport/updates/patches.
An important point after buying a device Allied Telesis Rapier Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis Rapier Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis Rapier Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis Rapier Series you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis Rapier Series will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis Rapier Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis Rapier Series.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis Rapier Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis Rapier Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
