Instruction/ maintenance manual of the product 1225 MK III Fender
Go to page of 8
Mk III SERIES Mk III SERIES PROFESSIONAL PROFESSIONAL LOUDSPEAKER LOUDSPEAKER ENCLOSURES ENCLOSURES Refer Refer ence / Owner ence / Owner ’ ’ s Manual s Manual for 1211 Mk III / 1225 Mk III for 12.
Fender Musical Instruments 7975 North Hayden Road, Scottsdale, Arizona 85258 U.S.A. A Message from the Chairman At Fender, we know the importance of sound reinforcement.
3 All W ood Construction with Stur dy Dado Joints High Curr ent 1/4” Phone Jacks and Neutrik Speakon ™ Connectors Titanium Diaphragm Hor n Active / Passive Cr ossover Operation Metal Cor ners and Rubber Feet T ough Indoor / Outdoor Synthetic Carpet Covering Thank you for purchasing a Mk III Series Loudspeaker System from Fender ® Pro Audio.
Parallel or series are the two basic ways which multiple speakers can be connected to a single power amplifier. When speakers are connected in parallel, their combined impedance decreases. For speakers wired in series the opposite is true, their combined impedance increases.
5 In normal operation (using the passive internal crossover), the 1/4" jacks and the Speakon ™ Connectors are wired in parallel allowing any one of the connectors to be used as an input and any other as an output.
6 For versatility and increased headroom, some users may choose to use an active electronic crossover / processor, such as the Fender PCN-2 or PCN-4, with the system. The electronic crossover takes the place of the internal crossover of the speaker system.
7 LOW OUT HIGH OUT A In A Out B Out Speakers operated in a bi-amp configuration with a subwoofer (tri-amping) A In Bridge Out Bridge Mono Mode MID OUT PCN-4 ELECTRONIC CROSSOVER INPUT MONITOR OUT MAIN.
MODEL 1211 Mk III 1225 MK III 1226 MK III PART NUMBER 071-1211-200 071-1225-200 071-1226-200 CABINET 5/8" (1.6 cm) 3/4" (1.9 cm) 3/4" (1.
An important point after buying a device Fender 1225 MK III (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender 1225 MK III yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender 1225 MK III - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender 1225 MK III you will learn all the available features of the product, as well as information on its operation. The information that you get Fender 1225 MK III will certainly help you make a decision on the purchase.
If you already are a holder of Fender 1225 MK III, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender 1225 MK III.
However, one of the most important roles played by the user manual is to help in solving problems with Fender 1225 MK III. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender 1225 MK III along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
