Instruction/ maintenance manual of the product 112 Fender
Go to page of 8
THE SOUN D THA T CREA TES LEGENDS P/N 048877 Owner , s Manual Deluxe 112 Plus.
Standard Strat / General Purpose / Any Pick-Up Combination Strat Insanity / Any Pick-Up Combination Note: Uses the drive channel only Smooth Rock Lead/ Humbucking Bridge Combination Note: Uses the dri.
DELUXE 112 PLUS OWNER’S MANUAL The Fender DELUXE 112 PLUS amplifier is a straight-ahead combination of radical new distortion sounds and time-tested Classic Fender Sounds packaged together in a Solid-State configuration, which is both easy to use and inherently r eliable.
A. INPUT I- A high impedance, high sensitivity plug-in connection for instruments. B. INPUT 2- A plug-in connection for instruments. This input exhibits lower input impedance and sensitivity than INPUT 1, and is useful with active pre-amp guitars. This input will provide a darker tone with passive guitars.
L. BASS- Adjusts the amount of low frequency boost or cut in the DRIVE channel. This control is post distortion and is useful for adjusting the amount of “thump” or “chunk” produced by the DRIVE channel. M. DRIVE- When this button is pressed, the amp switches from the NORMAL channel to the DRIVE channel.
LINE CORD This amplifier is equipped with a grounding type supply cor d to reduce the possibility of shock hazar d. Be sure to connect it to a grounded AC (mains) r eceptacle.
TYPE: P ART NUMBER: DIMENSIONS: POWER OUTPUT INPUT IMPEDANCE: EFFECTS LOOP: POWER REQUIREMENT SPEAKER: PR291 100V V ersion: 22-6772 120V V ersion: 22-6702 230V V ersion: 22-6762 240V V ersion: 22-6742 Height: 16-1/2” (41.9 cm) Width: 20-5/8” (50.5 cm) Depth: 9” (22.
DELUXE 112 PLUS Block Diagram A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP ., CORONA, CA 91720.
An important point after buying a device Fender 112 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fender 112 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fender 112 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fender 112 you will learn all the available features of the product, as well as information on its operation. The information that you get Fender 112 will certainly help you make a decision on the purchase.
If you already are a holder of Fender 112, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fender 112.
However, one of the most important roles played by the user manual is to help in solving problems with Fender 112. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fender 112 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
