Instruction/ maintenance manual of the product PowerTrim Fellowes
Go to page of 9
Electric P aper T rimmer 1789 Nor wood A venue, Itasca, Illinois 60143-1095 • USA • 630-893-1600 P owerT rim Australia Benelux United Kingdom United States Canada China Deutschland España F rance Italia Japan Korea P olska Singapore fellowes.com 2009 Fellowes, Inc.
Electric P aper T rimmer 1789 Nor wood A venue, Itasca, Illinois 60143-1095 • USA • 630-893-1600 P owerT rim Australia Benelux United Kingdom United States Canada China Deutschland España F rance Italia Japan Korea P olska Singapore fellowes.com 2009 Fellowes, Inc.
TRIMMER CONTROLS QUICK ST ART GUIDE F E 3 C B G A 12” 1 2 4 5 6 7 8 9 10 11 D H 3.
CAP ABILITIES W arning - blades are extremely sharp when exposed. Performance Cutting length 16.5” / 420mm Max cutting capacity 30 sheets / 20lb T rimming mechanism Electric trimming PowerSave Auto Shut-off 30min T echnical Data Main voltage 120V AC Frequency 50/60Hz Wattage 80 W atts Amps 1.
SafeCut™ Guard Ensures that power supply is stopped when guard is opened – for service and maintenance. SafeCut™ Clamp Ensures that paper is securely clamped before trimming – trimmer won’t cut when SafeCut™ Clamp is not closed. Electric trimming The ultimate trimming solution for safety and comfort – PowerT rim Electric trimming.
Switch the power on. Insert document to trim. Use the document gauge at the sides of the cutting base to check that items do not exceed maximum capacity . Use transparent window with orange trimline guide to quickly and accurately align your cuts. Align cut line with the outer edge of the orange trimline.
7 Unplug PowerT rim. Remove SafeCut™ Guard (magnetic catch). BLADE UNIT REPLACEMENT Remove the cutter blade unit by pulling the button on the blade unit. Replace with new blade unit (#54125). Tighten screws. Re-secure SafeCut™ Guard . Unscrew the 2 cross head screws on either side of the cutter blade unit (Phillips type screwdriver).
8 TROUBLESHOOTING AND LED INDICA TORS Status Possible Cause Solution Scissor icon is ON. Base LED lights are ON Ready to trim (clamped down and all covers closed) - Scissor Icon is OFF . Base LED lights are ON SafeCut Clamp is open Insert item and close SafeCut Clamp Scissor Icon is OFF .
Electric P aper T rimmer 1789 Nor wood A venue, Itasca, Illinois 60143-1095 • USA • 630-893-1600 P owerT rim Australia Benelux United Kingdom United States Canada China Deutschland España F rance Italia Japan Korea P olska Singapore fellowes.com 2009 Fellowes, Inc.
An important point after buying a device Fellowes PowerTrim (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fellowes PowerTrim yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fellowes PowerTrim - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fellowes PowerTrim you will learn all the available features of the product, as well as information on its operation. The information that you get Fellowes PowerTrim will certainly help you make a decision on the purchase.
If you already are a holder of Fellowes PowerTrim, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fellowes PowerTrim.
However, one of the most important roles played by the user manual is to help in solving problems with Fellowes PowerTrim. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fellowes PowerTrim along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
