Instruction/ maintenance manual of the product TID-894NRT Farenheit
Go to page of 58
Operating manual 7" W ide T ouch Scr een In-Dash Fully Motorized TFT Mo nitor / DVD/AM/FM Built-In TV T uner.
1 SAFETY INFORMA TION PLEASE READ COMPLETELY AND BECOME FAMILIAR WI TH THE CONTENTS OF THIS MANUAL BEFORE I NSTALLATION AND OPERATION OF THIS UNIT, AND KEEP IT CAREFULLY FOR F UTURE REFERENCE. This unit is a class 1 laser product. The laser beam may cause hazardous radiation if exposure to laser system directly.
2 Cautions: To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. While driving, keep the volume level low enough to be aware of road and traffic conditions. Parking in direct sunlight can produce ve ry high temperatures inside your vehicle.
3 FEATURES - Fully Motorized Screen T elescopes Out And Up Including Front T o Back Angling - (Optional) Navigation Black Box Module With Navteq Maps Of North America - Drop Down Detachable Front Pane.
4 TABLE OF CONTENTS Safety Inform ation………………………………………………….……………………… 1 Features………………………………………… …………………….………………………3 Table of Contents………………………… ………….
5 ACCESSORIES B o l t S t e e l B a r x 1 M 5 X 5 S c r e w s x 4 K e y s x 2 Connecter Wire x 1 T rim Bezel x 1 Remote Control x 1 Box x 1 Operational Manual x 1 Mounting Sleeve x 1 Nut M5 x 1 USB Ca.
6 UNIT INSTALLATION Please read all of the instructions before beginning the insta llation. Recommend having your unit installed by a professional installation shop.
7 ● Securing the Unit to the Mounting Bracket. Installation Method 1. Install the front panel into the unit. 2. Bend the claws outward for tight fit, if necessary. Install the Mounting Box into the dashboard, tighten the unit in place. 3. Install the Frame to the unit.
8 UNIT REMOVAL 1. Detach the front panel. 2. Insert the keys that supply to the unit at both sides of the unit (shown a s illustrated) until pull the keys to make it possible to remove the unit from the dashboard.
9 WIRING CONNECTION Cautions: -To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. -Make the proper input and output cable connections for each unit. -Connect the wiring harness cables in the following order: ground wire, battery wire, ignition wire.
10 Wiring Diagram NOTE: Please separate Battery Units before setting products to prevent from fire and electric shock. Mounting the antenna near to a radio antenna will result in noise.
11 Wiring Diagram.
12 FRONT PANEL 1. ANGLE - 11. MINI USB 2. ANGLE + 12. REMOTE 3. EJECT 13. LEFT / UP / RIGHT / DOWN / ENTER / BAND 4. OPEN / CLOSE 14. REL 5. POWER / SOURCE 15. EJECT 6. VOLUME / SEL 16. RESET 7. MUTE 17. OUT 8. AST 18. IN 9. PLAY / PAUSE 19. SYSTEM / NAVI 10.
13 1. [ANGLE -] / 2. [ANGLE +] Adjust the view angle of the monitor to choose the best displaying effect. 1- Continual angle adjustment Hold on pressing the [ANGLE +] / [ANGLE -] buttons to adjust the angle of TFT monitor upward / downward by continual increasing / decreasing.
14 7. [MUTE] Press the [MUTE] button to switch off the sound; press it again to resu me to the previous volume level. 8. [AST] Press to seek radio station / TV channel automatically under RADIO / TV Modes. 9. [ ll] Press to pause playback when playing; press again to continue playing.
15 14. REL Press to flip down the front panel. 15. [EJECT] When flip down the front panel, press to eject / load a disc. 16. [RESET] Press to reset the unit. 17. [OUT] / 18. [IN] Press the [OUT] / [IN] buttons to move the monitor forward / backward by singly step.
16 FRONT PANEL DISPLAY 1. EQ Indicator: It turns on to indicate the POP/CLASSIC/JAZZ/ROCK when corresponding setup. It turns off when custom setup. 2. Disc Icon: It rotates when playing disc under the DVD Mode. 3. Main Display Area: Display the information such as working mode, characters, playback time & number of track, radio frequency etc.
17 REMOTE CONTROL 1. POWER / SOU RCE 13. F . F W D 25. SUBTITLE 2. M U T E 14. S L O W 26. PREVIOUS 3. NUMBER BUTTONS 15. R A N D O M 27. RIGHT 4. M E N U 16. Z O O M 28. NEXT 5. A U D I O 17. SYSTEM / NA VI 29. D.ANGLE 6. D I S P L A Y 18. O P E N / C L O S E 30.
18 1. [POWER/SOURCE] Same functions as key on front panel. 2. [MUTE] Press the [MUTE] button to switch off the sound; press it again to resu me to the previous volume level. 3. [NUMBERS 0~9] For 1~6, press these buttons to store the current radio station or recall the stored station under the Radio Mode.
19 9. [BAND/ENTER] In radio mode, press the [BAND] button to switch the wave band as following: FM1 - FM2 - FM3 - AM1- AM2 - FM1 Press vertically to switch the TV as following: NTSC – PAL/BG – PAL/I – PAL/DK – NTSC In DVD mode, press the [ENTER] button to confirm the Setup Menu.
20 23. [PBC/AST] Press to turn the PBC function on / off when playing VCD disc. Hold on pressing to seek radio station / TV channel automatically under RADIO / TV Modes. 24. [TITLE] Press to enter the title menu when playing DVD disc. 25. [SUB-T] Press to select the subtitle language when playing DVD disc.
21 REPLACING THE BATTERIES If the remote control has no function or if the operating range reduced, r eplace the old battery with new one. 1. Pull out the battery holder. Follow the arrow 1 slide it to the right toward the battery while at the same time pu ll the battery holder away from the remote c o n t r o l .
22 BASIC OPERA TIONS Startup Press the [POWER/SOURCE] button on the panel or remote control to startup the power, the TFT monitor will spread out automatically and the system return to the working Mode when last turn off.
23 Auto Antenna Control Connect the auto antenna control wire AUTO_ANT (see Wiring Diagram); the antenna will lift when the unit startup; it will descend when the unit turn off. Brake Control It is necessary to connect the Brake Control wire to the Hand-brake switch of the car.
24 TOUCH SCREEN OPERA TI ONS TOUCH SCREEN CALIBRA TE When “Power Off”, press the buttons 1, 2, 3, 4, 5, [BAND] of remote control to enter the CALIBRA TE page: T o touch the point s from 1 to 5 until the points change to brighter by using a ballpoint pen or pencil .
25 MAIN MENU T ouch the icon “MORE” to enter the 2 nd page of main menu:.
26 RADIO OPERA TIONS T ouch the icon “RADIO” to enter the 1st operation p age of RADIO Mod e: 1~6. STORED CHANNEL Manual Store Radio Station Hold on touching the icon, you can store current radio frequency to the stored channe l. For example, the current frequency is 98.
27 10. BAND Touch the icon to switch the FM/AM wave band as following: FM1 - FM2 - FM3 - AM1- AM2 - FM1 T o press the [BAND] button of p anel or remote control performs same operation. 1 1. NEXT P AGE T ouch the icon to enter the 2 nd page of RADIO Mode: 1 .
28 1. ASM Seeking and store the stations 1. Hold on touching the icon to seek stations with the strongest signal from the lowest frequency point in the entire wave bands; press any button to stop seeking. After seeking, the former stored stations will be instead.
29 DVD OPERA TIONS T ouch the icon “DVD” to enter the DVD Mode if disc inside. The unit will switch to DVD Mode automatically if loading disc. The unit will switch to RADIO Mode automatically if ejecting disc. 1st operation p age of DVD Mode: 1. PREV / 2.
30 7. STOP During movie playback, touch the icon once; the DVD player memorizes the location where you stopped (touch the [PLA Y] icon to resume playing from the memorized location). If you touch the icon twice, the playback will st art from the beginning of the disc when you touch the [PLA Y] icon.
31 USB OPERA TIONS T ouch the icon “USB” to enter the USB Mode if USB connected. The unit will switch to USB Mode automatically if connecting USB. When disconnecting USB, the unit will switch to RADIO Mode automatically if there is no disc in the unit; and the unit will switch to DVD Mode automatically if there is a disc inside.
32 TV OPERA TIONS T ouch the icon “TV” to enter the TV Mode: 1~6. STORED CHANNEL Manual Store TV Station Hold on touching the icon, you can store current station to the stored channel. For example, the current station is 3 CH, by hold on touching the icon 1, you can store the radio station of 3 CH, to the channel 1.
33 11 . EXIT T ouch the icon to exit the TOUCH ICONS display . 12. NEXT P A GE T ouch the icon to enter the 2 nd page of TV Mode: 1. SEEK – / 2. SEEK + Touch the icon to seek the next available channel by increasing / decreasing the tuning frequency.
34 1. ASM Seeking and store the stations. 1. Touch the icon to seek all stations with the strongest signal fr om the lowest frequency point; press any button to stop seeking. After seeking, the former stored stations will be instead. 2. Store the received effective TV stations to the six stored channels M1~M6.
35 IPOD OPERA TIONS T ouch the icon “IPOD” to enter the IPOD Mode if iPod connected. The unit will switch to IPOD Mode automatically if connecting iPod. The unit will switch to RADIO Mode automatically if disconnecting iPod. NOTE: It is available for iPod operations with an additional iPod cable which is optional accessory .
36 11 . PLA Y / P AUSE T ouch the icon to play or p ause the disc. T o press the [PLA Y/P AUSE] button of panel or remote control performs the same operation. 12. VIDEO T ouch the icon to switch to the VIDEO operation. 13. MENU T ouch the icon to return the main menu.
37 A V IN OPERA TIONS T ouch the icon “A V IN” to enter the A V IN Mode: 1. MUTE T ouch the icon to switch off the sound; touch it a gain to resume to the previous volume level. 2. EQ The user can set to adjust the audio output to your preference: USER – POP – CLASSIC – ROCK – JAZZ – USER 3.
38 AUX OPERA TIONS T ouch the icon “AUX” to enter the AUX Mode: 1. MUTE T ouch the icon to switch off the sound; touch it a gain to resume to the previous volume level. 2. EQ The user can set to adjust the audio output to your preference: USER – POP – CLASSIC – ROCK – JAZZ – USER 3.
39 NA VI OPERA TIONS T ouch Scre en Calibrate When 1 st time to enter NA VI mode, you will see the CALIBRA TE screen. Please touch the points fr om 1 to 5 by using a ballpoint pen or pencil. T o verify the calibration, please touch the points from 1 to 5 again.
40 The T ouch Screen is restored to their default positions. T ouc h anywhere of panel to finish the calibration and go to the following screen: Read information and touch “I agree” button at the bottom of the screen, then enter the NA VI mode.
41 Go to NA VI mode T ouch the icon “NA VI” to enter the NA VI Mode if NA VIbox connected: Following screen will be displayed: Read information and touch “I agree” button at the bottom of the screen. Enter the NA VI mode by main menu, the NA VI operations are ef fective only , all other processes are disable such as Radio, CD etc.
42 Quick Acce ss Key [NA VI] Under any working mode, press the [NA VI] button to switch to NA VI mode; press the NA VI button again to return the previous working mode. For example, under Radio mode, press the [NA VI] button to switch to NA VI mode; press the button again to quit the NA VI mode and return back the Radio mode.
43 SYSTEM SETUP T ouch the icon “SETUP” or press the [SYSTEM] button of panel to enter the SETUP of system parameters: 1. SYSTEM SETUP 2. VIDEO SETUP 3. AUDIO SETUP 4. MORE AUDIO SETUP 5. CLOCK SETUP T ouch the icon 1~5 to select the main menus directly .
44 SYSTEM SETUP RADIO ARE A: USA – JAP AN – OIRT – EUROPE – ASIA – USA TV AREA: US – CCIR – IT – AUS – NZ – US DEF AUL T : the unit will r estore all default settings of Sound Parameter , Picture Parameter & T uner Parameter .
45 AUDIO SETUP BASS: - 15 ~ + 15 TREBLE: - 15 ~ + 15 BALANCE: L 15 ~ R 15 F ADER: F 15 ~ R 15 MORE AUDIO SETUP SUB-WF FRQ: 80HZ – 120HZ – 160HZ – OFF – 80HZ SUB-WF VOL: 0 ~ 15 BEEP SOUND: ON /.
46 CLOCK SETUP CLOCK: 12H / 24H DISPLA Y : ON / OFF HOUR: 00 ~ 23 MINUTE: 00 ~ 59.
47 DVD SETUP MUNE SETUP MENU OPERA TION Press the [SETUP] button of remote control to enter the DVD SETUP Menu. Press the [<] / [>] buttons to switch the main menus as following: SYSTEM – LANGUAGE – AUDIO – VIDEO – SPEA KER – DIGIT AL Press the [ ∧ ] / [ ∨ ] buttons to enter the submenus from main menus.
48 SYSTEM MENU TV SYSTEM Following options are available for the TV Display: N T S C SCREEN SA VER Select ON or OFF . VIDEO Following options are available for the TV Display: I N T E R L A C E - Y U .
49 LANGUAGE SETUP OSD LANGUAGE Following options are available for the OSD LANGUAGE: ENGLISH GERMAN SP ANISH FRENCH PORTUGUESE IT ALIAN RUSSIAN DUTCH SWEDIS H KOREAN D A N I S H N O R W E G I A N P O .
50 AUDIO SETUP AUDIO OUT Following options are available for the AUDIO OUT : S P D I F / O F F S P D I F / R A W S P D I F / P C M KEY Following options are available for the KEY : b - 4 - 2 0 + 2 + 4.
51 CONTRAST Following options are available for the CONTRAST : 0 2 4 6 8 1 0 1 2 HUE Following options are available for the HUE: - 6 - 4 - 2 0 + 2 + 4 + 6 SA TURA TION Following options are available.
52 DIGIT AL SETUP OP MODE Following options are available for the OP MODE: L I N E O U T R F R E M O D DYNAMIC RANGE Following options are available for the DYNAMIC RANGE: F U L L 6 / 8 4 / 8 2 / 8 O .
53 TROUBLE SHOOTING If any of problem persists after checking the below list, Please consult your nearest service dealer. Never attempt to disassemble and repair unit personally .
54 Problem Cause Corrective Action TFT MONITOR Monitor does not open automatically TFT Auto Open is turned of Turn TFT Auto open on No image Incorrect connection to parking brake wire PARKING is activ.
55 Problem Cause Corrective Action MP3 Interruption occurred during playback Disc is dirty or scratched Clean disc or replace Can not read disc File is damaged/bad recording Recreate disc with good fi.
56 SPECIFICATIONS GENERAL Supply Voltage : 14.4 V DC (10.8-16 V DC Allowable) Load Impedance : 4 Ω Max Power Output : 50 W x 4 Bass 100Hz : ≥ 10dB T reble 10KHz : ≥ 10dB Dimension (approx) : 187 x 188 x 60 mm (d/ w/h) Mounting (approx) : 160 x 178 x 50 mm (d/w/h) FM TUNER Frequency Range : 87.
57 DISC NOTES ■ Disc formats supported by this player Handling and Cleaning ● Dirty, dusty, scratched or warped discs will cause misoperation. ● Do not place stickers or make scratches on discs. ● Do not warp discs. ● A disc should always be kept in its case when not in use to prevent from damage.
An important point after buying a device Farenheit TID-894NRT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Farenheit TID-894NRT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Farenheit TID-894NRT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Farenheit TID-894NRT you will learn all the available features of the product, as well as information on its operation. The information that you get Farenheit TID-894NRT will certainly help you make a decision on the purchase.
If you already are a holder of Farenheit TID-894NRT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Farenheit TID-894NRT.
However, one of the most important roles played by the user manual is to help in solving problems with Farenheit TID-894NRT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Farenheit TID-894NRT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
