Instruction/ maintenance manual of the product SVR3K-2T Falcon
Go to page of 13
OM48021-1 Rev. C 1 SVR SERIES PRECISION UTILITY VOLTAGE REGULATOR AND CONDITIONER OWNER’S MANUAL SVR1K-1T & SVR2K-2T SVR2K-1T &SVR2K-2T SVR3K-1 & SVR3K-2T FALCON Electric Inc. , 5106 Azusa Canyon Rd., Irwindale, California 91706 800-842-6940 Fax : 626-962-7720 Email: sales@falconups.
OM48021-1 Rev. C 2 SVR SERIES FEATURES • COMPACT SIZE, LIGHT WEIGHT • WIDE INPUT VOLTAGE WINDOW • TIGHT OUTPUT VOLTAGE REGULATION (±2%) • INPUT POWER FACTOR CORRECTION • SURGE PROTECTION .
OM48021-1 Rev. C 3 This following User’s Manual is provided to better enhance your understanding of the product and ensure its proper installation and usage. Reading this manual carefully prior to installation of the SVR Series Precision Utility Voltage Regulator and Conditioner will save ti me and ensure worry-free operation.
OM48021-1 Rev. C 4 CARE & MAINTENANCE The SVR Series Precision Utility Voltage Regulator and C onditioner is designed to be ma intenance-free. It can be cleaned with a damp cloth or nonabrasive cleans er providing it is turned off and t he input plug is disconnected from the utility source.
OM48021-1 Rev. C 5 FRONT PANEL INDICATOR AND FUNCTION KEYS LOAD LEVEL INDICATOR LEDS The first or bottom LED is lit when the output load is greater than 25% of t he rated output of the SVR. The second LED is lit when the output load is gr eater than 50% of the ra ted output of the SVR.
OM48021-1 Rev. C 6 7 FAULT INDICATOR LED This LED is lit during the following conditions: The inverter voltage is too high or low. SVR over temperature condition. Internal DC Bus has an under or over voltage condition. Internal microprocessor or memory failure.
OM48021-1 Rev. C 7 Audiable Alarms Audible alarm signals are divided into two catagories. Each category represents a differ ent level of alarm status. Catagory One Alarms represent normal or correctable operational alarms.
OM48021-1 Rev. C 8 DIP SWITCH SETTINGS (All SVR 1kVA – 3kVA Models) FOR 100-120Vac NOMINAL LINE VOLTAGE SW2 SW1 VOLTAGE Down Down 100V Down Up 110V Up Down 120V Up Up 115V FOR 220-240Vac NOMINAL LIN.
OM48021-1 Rev. C 9 TYPICAL FRONT VIEW INSTALLATION DETAILS SVR1K-1, SVR2K-1, SVR3K-1, SVR1K-2T, SVR2K-2T & SVR3K-2T Tower Models Front Control panel Input Power Circuit Breaker (On the rear panel).
OM48021-1 Rev. C 10 REAR VIEW SVR1 K -2T REAR VIEW SVR2 K -1T & SVR3 K -1T OPTIONAL EXTERNAL BATTERY CONNECTOR OUTPUT RECEPTACLES 4 each IEC 320 COVER PLATE FOR OPTIONAL SNMP AGENT DIP SWITCHES RS.
OM48021-1 Rev. C 11 REAR VIEW SVR2 K -2T & SVR3 K -2T COVER PLATE FOR OPTIONAL SNMP AGENT DIP SWITCHES RS - 232 CONNECTOR COOLING FANS DO NOT BLOCK MAIN POWER SW ITCH & INPUT CIRCUIT BREA KER .
OM48021-1 Rev. C 12 GENERAL PROVISIONS FALCON ® ELECTRIC INC. hereby warrants product shipped under this agreement to be free from defective workmanship for a period of two y ears following date of shipment. This Limited New Product Warranty Agreement only applies to covered repairs to the product occurring w ithin the United States and Canada.
OM48021-1 Rev. C 13 FCC CONSIDERATIONS This equipment generates and uses radio frequency energy and if not installed and us ed properly in strict accordance with the manufacturer’s instructions, may cause interferenc e to radio and television reception.
An important point after buying a device Falcon SVR3K-2T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Falcon SVR3K-2T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Falcon SVR3K-2T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Falcon SVR3K-2T you will learn all the available features of the product, as well as information on its operation. The information that you get Falcon SVR3K-2T will certainly help you make a decision on the purchase.
If you already are a holder of Falcon SVR3K-2T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Falcon SVR3K-2T.
However, one of the most important roles played by the user manual is to help in solving problems with Falcon SVR3K-2T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Falcon SVR3K-2T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
