Instruction/ maintenance manual of the product ED3000-A Falcon
Go to page of 16
OWNER'S OPERATING MANUAL FREQUENCY CONVERTER & UNINTERRUPTIBLE POWER SYSTEM FOR MODELS: ED3000-A ED4000-A FALCON ® ELECTRIC INC. 5106 Azusa Canyon Road Irwindale, CA 91706 Tel. 626-962-7770 Fax. 626 962-7720 T he information contained herein is the property of FALCON ® ELECTRIC INC.
TABLE OF CONTENTS Important Safety Instructions (READ FIRST) . . 1 Chapter 1, ED Series Overview ..... 2 Input/Output Specifications Table. ... 2 Block Diagram ...... 3 Chapter 2, Installation ...... 4 Inspecting the Equipment .... 4 Unit Setup ......
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions which must be followed during the installation, operation and maintenance of this unit and its battery options. Please read all instructions before operating this equipment and save this manual for future reference.
CHAPTER 1 CHAPTER 1 ED Series - Overview Congratulations! You have selected the ED Series Frequency Converter, Voltage Regulator and UPS. The FALCON ® ED Series UPS offers a quiet and compact package with proven performance you can depend on. This User’s Guide is provided with your new ED unit.
Refer to the simplified block diagram, Figure 1, for a system description. The AC source is rectified and provides energy for the DC + Choppers and a float charge to the optional standby Battery. These DC Choppers then supply the power to operate the DC/AC Inverter.
CHAPTER 2 CHAPTER 2 Installation Inspecting the Equipment If any FALCON ® equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage.
CHAPTER 3 CHAPTER 3 Controls, Displays & Functions 1. AC- AC LINE INDICATOR This green LED turns on when the AC source is present. 2. INV- INVERTER OPERATING The LED turns green when the ED inverter is turned on. This LED normally turns on a few seconds after the AC line indicator LED and remains on during both utility and battery operation.
TYPICAL ED3000 & ED4000 REAR PANEL LAYOUT 6. DB-9F COMMUNICATIONS INTERFACE This connector gives access to the ED contact closure status interface. Please reference page 7 of this manual for details. 7. Hardwire conduit connector mounting holes for input and output wiring.
CHAPTER 4 CHAPTER 4 DB-9 COMMUNICATIONS INTERFACE 7.
CHAPTER 5 CHAPTER 5 OPERATION The FALCON ® ED unit is very simple to use. 1. Verify the unit is connected to the correct voltage power source. 2. Activate the power switch to the "ON" position. 3. The green AC LED illuminates. 4. The green INV LED illuminates.
To escape this condition, the problem must first be corrected then turn the ED power switch "OFF", then back "ON". For models supplied with batteries it is recommended that you leave the ED unit power switch "ON" at all times and switch your devices "OFF" individually.
CHAPTER 6 CHAPTER 6 Maintenance & Technical Support 1. Care & Maintenance Falcon ® ED Series are designed to be maintenance-free. They can be cleaned with a damp cloth or non-abrasive cleanser, providing the ED is turned off and the input plug is disconnected from the utility source.
The following precautions should be observed by a qualified technician when working with batteries. 1. Remove watches, rings, or other metal objects. 2. Use tools with insulated handles. 3. Wear rubber gloves and boots. 4. Do not lay tools or metal parts on top of batteries.
6. Technical Support Your FALCON ® Electric ED Series is backed by one of the finest customer service teams assembled. Write, Call, Fax or Email should you require technical assistance or service. FALCON ELECTRIC, INC. 5106 Azusa Canyon Road Irwindale, CA.
Technology Breakthrough Falcon ® Electric's ED Series TM UVS Plus ® is more than an international voltage/frequency converter, voltage regulator or line conditioner. Its unique features will significantly improve your equipment's reliability, virtually eliminating power-related downtime and dramatically increasing productivity.
ED Series TM UVS PLUS ® Model -A ED Series Model -A Frequency Converter (120V Input/Output) Model Number ED - 1000 - A ED - 1500 - A ED - 2000 - A ED - 3000 - A ED - 4000 - A Nominal VA 1000 1500 2000 3000 4000 Electrical Input AC Voltage, +10% - 20% 120V 120V 120V 120V 120V Current - Amps 10 .
An important point after buying a device Falcon ED3000-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Falcon ED3000-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Falcon ED3000-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Falcon ED3000-A you will learn all the available features of the product, as well as information on its operation. The information that you get Falcon ED3000-A will certainly help you make a decision on the purchase.
If you already are a holder of Falcon ED3000-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Falcon ED3000-A.
However, one of the most important roles played by the user manual is to help in solving problems with Falcon ED3000-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Falcon ED3000-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
