Instruction/ maintenance manual of the product AT-GS900/16 Allied Telesis
Go to page of 45
613-001351 Rev. A Gigabit eco-friendly Ethernet Switches AT-GS900/16 AT-GS900/24 Installation Guide.
Copyright © 2010 Allied Telesis, Inc. All rights reserved. No part of this publication may be repr oduced withou t prior written permissi on from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Alli ed Telesis, In corporated.
3 Electrical Safety and Emissions S tandards This product meets the following standards. RFI Emissions FCC Class A CISPR 22 Class A EN55022 Class A: 2006+A1:2007 versio n Immunity EN55024 Electrical Safety UL – USA (UL60950-1) LVD (EN60950-1, 2nd edition) CSA or cUL – Canada C-Tick – Australia CE Mark U.
4 T ranslated Safety S tatements Important: The symbol indicates that a translation of t he safety state ment is available in a PDF document titled “Translated Safety State ments”. Th is is posted on the Allied Telesis website at http://www.alliedtelesis.
5 Preface ........ ................ ................ ............. ................ ................. ................ ................ ......... .................... ......... 11 Safety Symbols Used in this Document .............. ................. .
Contents 6.
7 Figure 1. Front Panels ................... ................. .................... ................. ................ ............... ................ ................. ................ 18 Figure 2. Back Panels ..... ................. ...............
Figures 8.
9 Ta b l e s Table 1. Safety Sy mbols ....... ................. ................... ................. ................. ................. ........ .............. ................. ................ 12 Table 2. eco-friendly Switch Functions ............
List of Tables 10.
11 Pr eface This guide contains instructions on ho w to install the AT-GS900/16 and AT-GS900/24 Gigabit Ethernet Switc hes. This preface contains the following sections: “Safety Symbols Used in .
Preface 12 Safety Symbols Used in this Document This document uses the safety symbols defined in Table 1. T able 1. Safety Symbols Symbol Meaning Description Caution Performing or omi tting a specific action may result in equipment damage or loss of data.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 13 Where to Find Web-based Guides The product documentation for all Allied Telesis products are available in portable document forma t (PDF) on our web site. Go to http://www.
Preface 14 Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales and corporate information . Online Support You can request technical sup port online by accessing the Allied Telesis Knowledge Base: www.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 15.
16 Chapter 1 Pr oduct Description The AT-GS900/16 and AT-GS900/24 switches a re low operating power, unmanaged, Layer 2 Fanless Gigabit Et hernet switches designed to simplify the task of creating or expanding a n Ethernet, Fast Ethernet, or Gigabit Ethernet network.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 17 Features AT-GS900/16 and AT-GS900/24 Gigabit eco-friendly Et hernet switches features include: Silent fanless o.
Chapter 1: Produc t Description 18 Components Figure 1 illustrates the front panels of the AT-GS900/16 and AT-GS900/24 switches. Figure 1. Front Panels Figure 2 illustrates the back panels of the AT-GS900/16 and AT-GS900/2 4 switches.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 19 Hardware Feature Description The following sections describe hardw are features of the AT-GS900/1 6 and AT-GS900/24.
Chapter 1: Produc t Description 20 Maximum Distance Each twisted pair port has a maximum operating distance of 100 m (328 feet). Type of Cabling For 10 Mbps operation, Category 3 or b etter 100 ohm shielded or unshielded twisted pair cabling is required.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 21 eco-friendly Switch The eco-friendly switch on the front panel is multi-functional and shown in Figure 3. It may be used to ena ble all the port LEDs (out position) or conserve power by turnin g off the port LEDs (in position).
Chapter 1: Produc t Description 22 Table 3 describes the system a nd port LEDs on the AT-GS900/16 and AT-GS900/24 switches. AC Power Connector Both the AT-GS900/16 an d AT-GS900/24 switches have a single AC power supply socket on the back panel . To power ON or OFF the switch, you connect or disconnect t he power cord.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 23 Ethernet Switching Basics An Ethernet switch interconnects network devices, such as workstat ions, printers, routers, and other Ethernet switches, so that they can communicate with each other by sending and receiving Ethernet frames.
Chapter 1: Produc t Description 24 the end-node is ope rating in what is referred to as h alf-duplex mode. If an end-node can both receive and tra nsmit data simultaneously, the end- node is said to be operating in full-duplex mode.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 25.
26 Chapter 2 Installation This chapter contains the following sections: “Reviewing Safety Precautions” on p age 27 “Enter your hardware product model in t he Search by Product Name field; for example, enter A T -GS9 00/16 or A T -GS900/24.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 27 Reviewing Safety Precautions Please review the followin g safety precautions before you begin to inst all the switch or any of its components.
Chapter 2: Inst allation 28 Caution: Air vent s must not be blocked and must have free access to the room ambient air for cooling. E8 W arning: Operating T emperature. This product is designed for a maximum ambient temperature of 40° degree s C. E9 All Countries: Install product in accordance with local and National Electrical Codes.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 29 Selecting a Site for the Switch Observe the following requirements when choo sing a site for your switch: If you plan to install th e switch in an equipment rack, ensure that the rack is safely secured and that it will not tip over .
Chapter 2: Inst allation 30 Planning the Installation Table 4 contains the cab ling specifications for the twisted pair ports. Note The twisted pair ports on the switch featu re Auto-MDI when operating at either 10, 100, or 1 000 Mbps. Each port is individually configured as MDI or MDI-X when connected to an end-node.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 31 Unpacking the Switch To unpack an AT-GS900/16 or an AT-GS9 00/24 switch, perform the following procedure: 1. Remove all components from the shipping package. Note Store the packaging material in a safe location.
Chapter 2: Inst allation 32 Installing the Switch on a Table or Desktop To install the switch on a table or deskt op, perform the following procedure: 1.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 33 5. Apply AC power to the switch by plugging the power cord into th e AC power connector on the back pan el of the unit, as illustrated in Figure 6. Figure 6. Connecting the AC Po wer Connector to Switch 6.
Chapter 2: Inst allation 34 Installing the Switch on a Wall To install the switch on a wall, perform the following procedure: 1. Remove all the items from the packaging and store the packaging material in a safe place. In the event a p roblem occurs and you need to return the unit, please use as much of the origina l shipping material as possible.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 35 3. Place the switch on the wall. Then mount the switch using the plastic anchors and screws which are shipped with the p roduct.
Chapter 2: Inst allation 36 crossover twisted pair cable to co nnect any type of network device to a port on the switch. If you disable Au to-Negotiation on the port, the port defaults to MDI-X.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 37 Installing the Switch in a Rack Perform the following procedure to inst all the switch in a standard 19-inch rack. If you are not installing the switch in a rack, go to the next pro cedure.
Chapter 2: Inst allation 38 5. Mount the switch in the 19-inch rack using the #10-32 Phillip s screws which are shipped with the prod uct, as illustrated in Figure 11. Figure 11. Rack Mounting the Switch 6. Connected the twisted pair cabl es to the twiste d pair ports.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 39 10. Power ON the end-nodes connected to the switch . 11. Check that all the L/A LEDs are green o r blinking green for the ports connected to end-nodes. If any of the LEDs are OFF, refer to “Troubleshooting” on page 41 for instructions.
Chapter 2: Inst allation 40.
41 Chapter 3 T r oubleshooting This chapter contains information on how to troubleshoot the switch in the event that a problem occurs. Note If you are still unable to resolve the problem a fter following the instructions in this chapter, conta ct ATI Technical Support for assistance.
42 Appendix A T echnical Specifications Physical Specifications Dimensions: (W x D x H) AT-GS900/16 12.1 cm x 18.4 cm x 4.4 cm (4.7 in x 7.2 in x 1.7 in) AT-GS900/24 28 cm x 18 cm x 4.4 cm (11.0 in x 7.1 in x 1.7 in) Weight: AT-GS900/16 0.954kg (2.1 lbs) AT-GS900/24 1.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 43 Safety and Electromagnetic Emissions Certifications EMI FCC Part 15 Class A CISPR 22 Class A, EN55022 Class A: 2006.
Chapter : Technica l Specifications 44 RJ-45 Twisted Pair Port Connectors This section lists the connectors and connector pinout s for the AT-GS900/16 and AT-GS900/24 Fa nless Gigabit Ethernet Switches and their components. Figure 12 illustrates the pin layout to a n RJ-45 connector and port.
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switc h Installation Guide 45 1000Base-T port is operating at 1 000 Mbps. T able 7. RJ-45 1000Base-T Connector Pinouts a a.
An important point after buying a device Allied Telesis AT-GS900/16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis AT-GS900/16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis AT-GS900/16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis AT-GS900/16 you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis AT-GS900/16 will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis AT-GS900/16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis AT-GS900/16.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis AT-GS900/16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis AT-GS900/16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
