Instruction/ maintenance manual of the product SI 26 Extron electronics
Go to page of 6
© 2006 Extron Electronics. All rights reserved. Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Extron Electronics, Euro pe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.
SI 26 and SI 28 Speakers • Introduction 1 About the SI 26 and SI 28 Speakers The Extron System INTEGRA TOR™ SI 26 and SI 28 two-way surface mount speakers are ideally suited for classr ooms, conference r ooms, and boardrooms. W ith a weather resistant construction, they are also suitable for outdoor envir onments.
SI 26 and SI 28 Speakers • Introduction 2 Installation Installing the SI 26 or SI 28 Speaker The SI 26 or SI 28 can be mounted on a surface, such as a wall or post, or mounted in a bookcase, or under a shelf, and can be used with any Extron pr oduct with power amps.
4 SI 26 and SI 28 Speakers • Installation Installation, cont’d Cut access hole alongside stud and feed wires though hole. Wall Stud Wall Mount Assemb ly Wall Approximate Stud line behind wall Bend wire to line up with access hole in plate.
6 SI 26 and SI 28 Speakers • Specifications Installation, cont’d 1 1. Repeat steps 1-10 for the second speaker . 12. When both speakers are in place, car efully pull enough wire to r each up to the terminals at the back of the speaker and strip the ends of the wire appr oximately 5/8" (15 mm), for connection.
Extron’ s W arranty Extron Electronics warrants this pr oduct against defects in materials and workmanship for a period of five years from the date of purchase.
An important point after buying a device Extron electronics SI 26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronics SI 26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronics SI 26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronics SI 26 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronics SI 26 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronics SI 26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronics SI 26.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronics SI 26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronics SI 26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
