Instruction/ maintenance manual of the product FOX 500 DA6 Extron electronics
Go to page of 32
Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.33.453.4040 FAX +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Rd.
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压，有触电危险。 .
FOX 500 DA6 • Quick Start Guide Quick Start Guide — FOX 500 DA6 QS-1 Install, connect, and operate the FOX 500 DA6 as follows: Step 1 T urn all of the equipment off or disconnect it from the power source. If desir ed, mount the DA in a rack or furniture, or place it on a desktop.
FOX 500 DA6 • Quick Start Guide Quick Start Guide — FOX 500 DA6 cont’d QS-2 i FOX 500 DA6 • T able of Contents Chapter One • Introduction .................................................... 1-1 About this Manual ............................
ii FOX 500 DA6 • T able of Contents T able of Contents, cont'd FOX 500 DA6 1 Chapter One Intr oduction About this Manual About the FOX 500 DA6 Features All trad emarks me ntioned i n this man ual are t he propert ies of th eir respe ctive owne rs.
FOX 500 DA6 • Introduction Introduction FOX 500 DA6 • Introduction 1-3 1-2 W The FOX 500 DA6 outputs continuous invisible light, which may be harmful and dangerous to the eyes; use with caution. • Do not look into the rear panel fiber optic cable connectors or into the fiber optic cables themselves.
FOX 500 DA6 • Introduction Introduction, cont’d 1-4 FOX 500 DA6 • Introduction 1-5 The DA also buffers the RGB input and loops it thr ough on a 15-pin HD connector for use by a local monitor . The DA can handle an RGBHV , RGBS, RGsB, or RsGsBs input signal.
FOX 500 DA6 • Introduction Introduction, cont’d 1-6 FOX 500 DA6 2 Chapter T wo Installation and Operation Mounting the Unit Connections Front Panel Indicators System Operation.
FOX 500 DA6 • Installation and Operation Installation and Operation FOX 500 DA6 • Installation and Operation 2-2 2-3 Mounting the Unit C Installation and service must be performed by authorized personnel only .
FOX 500 DA6 • Installation and Operation Installation and Operation, cont’d 2-4 FOX 500 DA6 • Installation and Operation 2-5 5 . Align the installed screws with the slots in the mounting brackets, and place the unit against the surface, with the screws thr ough the bracket slots.
FOX 500 DA6 • Installation and Operation Installation and Operation, cont’d 2-6 FOX 500 DA6 • Installation and Operation 2-7 The input's audio level can be individually set via the master receiver's fr ont panel or RS-232 control. Refer to the FOX 500 Tx/Rx manual and see chapter 3, "Remote Control" in this manual.
FOX 500 DA6 • Installation and Operation Installation and Operation, cont’d 2-8 FOX 500 DA6 • Installation and Operation 2-9 Rear panel serial ports connection Do not tin the wires! Controlling .
FOX 500 DA6 • Installation and Operation Installation and Operation, cont’d 2-10 FOX 500 DA6 • Installation and Operation 2-11 6 feet (1.8 m) Part # 70-335-01 5 1 9 6 Sleev e (Gnd) Ring Tip 9-pi.
FOX 500 DA6 • Installation and Operation Installation and Operation, cont’d 2-12 FOX 500 DA6 System Operation After the DA, the receiver(s), and their connected devices ar e powered up, the system is fully operational.
FOX 500 DA6 • Remote Control Remote Control FOX 500 DA6 • Remote Control 3-2 3-3 The DA has two serial ports that can be connected to a host device such as a computer running the HyperT erminal utility , an RS-232 capable PDA, or a control system.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-4 FOX 500 DA6 • Remote Control 3-5 Symbols ] = CR/LF (carriage return/line feed) } = Carriage return (no line feed) • = space X! = Mute/au.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-6 FOX 500 DA6 • Remote Control 3-7 Tpx X&] The unit sends the Tpx message whenever the total pixels variable is changed from the master r eceiver's front panel.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-8 FOX 500 DA6 • Remote Control 3-9 Command ASCII Command (host to unit) Response (unit to host) Additional description Video mute Mute output 1B Blk1 ] Blank the video output. Unmute output 0B Blk0 ] Output video.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-10 FOX 500 DA6 • Remote Control 3-11 Command ASCII Command (host to unit) Response (unit to host) Additional description T otal pixels Set a total pixel value 1 1* X& # Tpx X&] Set the total pixels to a specific value.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-12 FOX 500 DA6 • Remote Control 3-13 Command ASCII Command (host to unit) Response (unit to host) Additional description Audio mute Mute the audio 1Z Amt1 ] Silence the receiver's audio output.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-14 FOX 500 DA6 • Remote Control 3-15 Command ASCII Command (host to unit) Response (unit to host) Additional description Information request.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-16 FOX 500 DA6 • Remote Control 3-17 Windows ® -based Program Contr ol The Extron FOX 500 Contr ol Program, which communicates with the DA via the unit's rear panel Remote RS-232 port or front panel Configuration port, pr ovides an easy way to operate the unit.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-18 FOX 500 DA6 • Remote Control 3-19 Status area The status area pr ovides visual indications of the connection status. These indications are similar to the fr ont panel indications described in chapter 2, "Installation and Operation".
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-20 FOX 500 DA6 • Remote Control 3-21 Video Adjustment ar ea The V ideo Adjustment area provides slider contr ols that let you change the fol.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-22 FOX 500 DA6 • Remote Control 3-23 Audio Adjustment area Audio Gain/Attenuation slider — Click and drag the Au di o Gain/Attenuation slider control to select the input audio gain or attenuation value, from -18 dB to +10 dB in 1.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-24 FOX 500 DA6 • Remote Control 3-25 Figure 3-9 — Open window a . Click Browse . The open file window appears. b . Navigate to the folder where you saved the firmware upgrade file in step 1.
FOX 500 DA6 • Remote Control Remote Control, cont’d 3-26 FOX 500 DA6 A Appendix A Refer ence Information Specifications Part Numbers.
FOX 500 DA6 • Reference Information Reference Information FOX 500 DA6 • Reference Information A-2 A-3 Specifications N The analog RGB input signal is digitized pixel for pixel in the transmitter , sent digitally through the fiber cable, and converted back to analog RGB in the receiver .
FOX 500 DA6 • Reference Information Reference Information, con t’d FOX 500 DA6 • Reference Information A-4 A-5 Frequency r esponse ..................... 20 Hz to 20 kHz, ±0.5 dB THD + Noise ................................. 0.10% @ 1 kHz at nominal level S/N .
FOX 500 DA6 • Reference Information Reference Information, con t’d FOX 500 DA6 • Reference Information A-6 A-7 Part Numbers FOX 500 DA6 part numbers The FOX 500 DA6 is available in a singlemode .
FOX 500 DA6 • Reference Information Reference Information, con t’d A-8.
An important point after buying a device Extron electronics FOX 500 DA6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronics FOX 500 DA6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronics FOX 500 DA6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronics FOX 500 DA6 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronics FOX 500 DA6 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronics FOX 500 DA6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronics FOX 500 DA6.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronics FOX 500 DA6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronics FOX 500 DA6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
