Instruction/ maintenance manual of the product VN-MATRIX 300 Extron electronic
Go to page of 4
1 VNM Recor der • Setup Guide The Extron VNM Recorder is a network storage device used to digitally record and play back multiple streams of high resolution video, audio, and data encoded to an IP network via VN-Matrix encoders and decoders.
2 VNM Recor der • Setup Guide (Continued) Step 7 — Congure the VNM Recor der Network Settings The VNM Recorder is pre-configured with the following network settings: IP address: 192.168.254.254 Subnet mask: 255.255.255.0 NOTE: Using these settings, the VN-Matrix 200 / 225 / 300 / 325 devices must use IP addresses within the range of 192.
3 3 g. Near the bottom of this file are two values named st_controlIp and st_localIp0 (see figure 4). Edit these values as follows: z If the VNM Recorder is the controller device, edit both values to match the IP address of the recorder .
4 VNM Recor der • Setup Guide (Continued) Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - West Extron USA - East +1.714.491.1500 +1.919.863.1794 +1.714.491.1517 FAX +1.919.863.1797 FAX Extron Europe +800.3987.6673 (Inside Europe Only) +31.
An important point after buying a device Extron electronic VN-MATRIX 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic VN-MATRIX 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic VN-MATRIX 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic VN-MATRIX 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic VN-MATRIX 300 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic VN-MATRIX 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic VN-MATRIX 300.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic VN-MATRIX 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic VN-MATRIX 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
