Instruction/ maintenance manual of the product SMD 101 Extron electronic
Go to page of 8
1 SMD101 • Setup Guide The Extron SMD101 decodes video or graphics str eams from an IP network, plays back internal video and audio les, and plays Video On Demand les from network shares at their original r esolution or scaled up or down to any common SD, HD, or graphics resolution up to 1900x1200 (WUXGA).
2 SMD101 • Setup Guide (Continued) Output Connections b HDMI output – Connect an HDMI (or DVI with suitable adapter) display device to the HDMI output connector . The EDID of a connected display is read and the output automatically congur ed.
3 Front Panel Featur es SMD 101 IR CONFIG 1 3 2 4 5 Figure 4. SMD101 Front Panel a Power LED – Lights solid green when the SMD101 is power ed. Lights solid red when in standby (low power) mode.
4 SMD101 • Setup Guide (Continued) Play a Stream: NOTE: The SMD101 must be connected to a LAN to locate and play str eams. Clips or streams stor ed in internal memory can be played without the need for a network connection. 1. In the Browser panel, select the Streams tab (see gure 5).
5 Operation With Extr on SME100 Encoders For SME100 stream discovery in the SMD101 str eams browser (see figur e 5 on page 4), the SME100 must have both Stream Control and SAP Control enabled to enable SAP announcements. The SME100 settings are shown below .
6 SMD101 • Setup Guide (Continued) Connecting to Streams W ithout SAP Announcements For a source that is not congur ed for SAP announcements (such as IP cameras), the RTSP (pull) str eam URI is entered dir ectly in the Source: eld of the SMD101 player controls.
7 Play Video on Demand The SMD101 can play video on demand from network shar es and supports the following le types: Video: [mp4,ts,m2t,m2ts,mov*,264,m4v,v*,sdp] NOTE: *Supports files that use H.264 encoding and AAC audio only . Images: [bmp,jpg,jpeg,tif,tiff,png,gif], NOTE: TIFF files using JPEG compr ession are not supported.
8 Extron Headquarters +800.633.9876 Inside USA/Canada Only Extron USA - W est Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 F AX +1.919.850.1001 F AX Extron Europe +800.3987.6673 Inside Europe Only +31.33.453.4040 +31.33.453.4050 F AX Extron Asia +65.
An important point after buying a device Extron electronic SMD 101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic SMD 101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic SMD 101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic SMD 101 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic SMD 101 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic SMD 101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic SMD 101.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic SMD 101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic SMD 101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
