Instruction/ maintenance manual of the product AT-AR021 (S) BRI-S/T Allied Telesis
Go to page of 13
P or t Interface Car d Installation and Safety Guide A T -AR020 PRI E1/T1 A T -AR021 (S) BRI-S/T A T -AR021 (U) BRI-U A T -AR022 ETH A T -AR023 SYN A T -AR024 ASYN4 A T -AR026 4ETH A T -AR027 V oIP-FX.
P or t Interface Car d Installation and Safety Guide A T -AR020 PRI E1/T1 A T -AR021(S) BRI-S/T A T -AR021(U) BRI-U A T -AR022 ETH A T -AR023 SYN A T -AR024 ASYN4 A T -AR026 4ETH A T -AR027 V oIP-FXS Download the complete document set fr om www .alliedtelesis.
2 P or t Interface Card Po r t Interface Car d Installation and Safety Guide Document Number 613-000601 Rev D. © 2008 Allied T elesis, Inc. All rights reserved. No part of this publication ma y be repr oduced without prior writte n permission from Allied T elesis, Inc.
Installation an d Safety Guide 3 About this Guide Po r t Interface Car ds (PICs) are a cost effective an d flexible mechanism f or adding new or additional netw ork interfaces to y our switch or r outer .
4 P or t Interface Card P ackag e Contents The following items ar e included with each P or t Interface Card (PIC). Contact you r authorised Allied T elesis distributor or r e seller if any it ems are damaged or missing. ■ two spring-lo aded retaining thumbscr ews ■ two jumpers (A T -AR02 0 PRI E1/TI and A T -AR021(S) BRI-S/T only).
Installation an d Safety Guide 5 Installing a PIC This section describes the pr ocedure f or installing a PIC . Y ou should also follow this pr ocedure, in particular the safety pr ocedures and warnings, when replacing o r rem ov in g a P IC . Caution Y ou cannot install PICs into an A T -AR040 NSM that has pow er applied to it.
6 P or t Interface Card 7. Unpack the PIC. In an antistatic en vironment, r emov e the PIC from its packing material. Be sure to observe ESD pre cautions. Wa r n i n g Do not attempt to install a PIC or any other expansion option without observing corr ect antistatic pr ocedures.
Installation an d Safety Guide 7 A T -AR026 4ETH PICs ha ve user -configurable links that set features such as auto-negotiatio n, buffer size, and MAC address aging. F or a detailed descript ion of the links, see the Por t Interf ace Card Har dware Re ference .
8 P or t Interface Card Setting the ISDN T er ritor y Befor e you connect an A T- AR020 or A T- AR021 PIC to the ISDN network, check that the ISDN ter ritor y is set corr ectly for your r egion. 1. Log in to y our switch or r outer . For more information, see the Installation and Safety Guide included with your switch or r outer .
Installation an d Safety Guide 9 Do wnloading V oIP Firmwar e If you hav e installed an A T- AR027 V oIP PIC, you no w need to download and install the V oIP firmwar e onto your PIC. Befor e you begin, check that the PIC Err or LED on the PIC is off , and that the PIC has been recognised by your s witch or route r , using the sho w system command.
10 P or t Interface Card 6. Load the pr otocol image onto the PIC. T o load the protoc ol image, use the command: enable voip protocol={h323|sip} [engine={ engine }] The boot code loads th e protocol onto all A T- AR027 PICs unless y ou specify an individual PIC (engine).
Installation an d Safety Guide 11 Obtaining Documentation and Resour ces For more inf ormation, see: ■ the Installation and Saf ety Guide for yo ur switch or r outer ■ the P or t Interface Card Ha.
12 P or t Interface Card T elecommunications Interfaces Wa r n i n g T o reduc e risk of fir e , use only No .26 aw g (0.4 mm) or larger telecommunic ations line cord if the cord supplied i s not used with the apparatus.
An important point after buying a device Allied Telesis AT-AR021 (S) BRI-S/T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis AT-AR021 (S) BRI-S/T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis AT-AR021 (S) BRI-S/T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis AT-AR021 (S) BRI-S/T you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis AT-AR021 (S) BRI-S/T will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis AT-AR021 (S) BRI-S/T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis AT-AR021 (S) BRI-S/T.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis AT-AR021 (S) BRI-S/T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis AT-AR021 (S) BRI-S/T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
