Instruction/ maintenance manual of the product QGE 100 Extron electronic
Go to page of 4
Product Category 1 QGE 100 • Setup Guide The QGE 100 Quantum Graphics Encoder encodes an RGB or DVI signal from a source computer or similar graphical device and streams it to a Quantum ® Elite Videowall Processor , computer , or other viewing device over an IP network.
QGE 100 • Setup Guide (Continued) 2 Front Panel Featur es S TA TUS LAN QGE 100 QUANTUM GRAPHICS ENCODER 1 2 3 a Power LED (green) — Lights when the unit has power . b LAN LED (amber) — z Blinking: Data is being transmitted. z Unlit: No data is being transmitted or no source is connected.
Product Category 3 6. In the Network Settings section of the main window , enter the following multicast settings: z TTL (Time to Live) : Enter the number of jumps a multicast message can make through a router to other subnets before being canceled ( 5 is recommended).
68-2178-50 Rev . A 01 12 4 © 2012 Extron Electronics All rights reserved. www .extron.com Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - West Extron USA - East +1.714.491.1500 +1.919.863.1794 +1.714.491.1517 FAX +1.919.863.
An important point after buying a device Extron electronic QGE 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic QGE 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic QGE 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic QGE 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic QGE 100 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic QGE 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic QGE 100.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic QGE 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic QGE 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
