Instruction/ maintenance manual of the product AT-9800 Series Allied Telesis
Go to page of 5
Software Maintenance Release Note Release sb273-01 For SwitchBlade 4000 Series Switches and A T -9800 Series Switches Intr oduction This software maintenance release note lists the issues addressed, and enhancements made, in patch SB273-01 fo r Software Release 2.
2 Enabling and installing this Releas e Software Maintenance Release Note Release sb273-01 C613-10436-00 Rev A Some of the issues addressed i n this Re lease Note include a level number . This number reflects the importance of the issue that has been r esolved.
Release sb2 73-01 3 Release sb273-01 C613-10436 -00 Rev A A reboot could occur while ageing out Firewall sessions when the device was under heavy load and had many active Firewall session s.
4 Features in sb273-01 Software Maintenance Release Note Release sb273-01 C613-10436-00 Rev A Previously , wh en the packet overhead limits were exceede d, some packets were being silently dr opped by SQoS.
Release sb2 73-01 5 Release sb273-01 C613-10436 -00 Rev A DVMRP packets wer e being dr opped due to packet length incon sistencies from other vendor devices. This issue has been r esolved. (No PCR number .) If A TM is receiving a OAM loopback cell (normal from an ISP) at regular intervals then it may cause a reboot.
An important point after buying a device Allied Telesis AT-9800 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis AT-9800 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis AT-9800 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis AT-9800 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis AT-9800 Series will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis AT-9800 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis AT-9800 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis AT-9800 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis AT-9800 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
